run-tests: write tmp paths into env copy [ original upstream message ]

run-tests: use env dict to kill daemons [ original upstream message ]

run-tests: add env dict to isolate test environment [ original upstream message ]

run-tests: remove some unnecessary globals [ original upstream message ]

run-tests: add a log function [ original upstream message ]

run-tests: make vlog a proper function [ original upstream message ]

run-tests: unify marks and result codes [ original upstream message ]

run-tests: change return code of runone [ original upstream message ]

run-tests: regroup some initialization checks [ original upstream message ]

run-tests: fix a path existence check [ original upstream message ]

run-tests: regroup some variable initialization [ original upstream message ]

run-tests: regroup nested functions [ original upstream message ]

run-tests: regroup temp dir creation [ original upstream message ]

run-tests: pull hgrc creation out as function [ original upstream message ]

tests: simplify handling of unknown test types [ original upstream message ]

run-tests: filter out non-tests from default list [ original upstream message ]

run-tests: make a table of test types [ original upstream message ]

run-tests: don't need to test shebang any more [ original upstream message ]

Merge with stable

run-tests: when running in parallel, delete tmpdirs immediately This is especially important if extensions that use inotify are enabled, because it's very easy to hit the inotify max_user_instances limit without this. [ original upstream message ]

Merge with stable

repo: repo isolation, do not pass on repo.ui for creating new repos A repo should not get the configuration from an other repo, so create it with the global configuration in repo.baseui. This is done too when recreating a repo. The repo configuration is reread anyway. And now deleted repo configuration does not persist. [ orginal upstream message ]

run-tests: introduce --random for running tests in random error This is convenient when investigating failures one by one to avoid running the same fixed tests first every time. [ original upstream message ]

Merge with stable

run-tests: only sort files when not given as argument os.listdir returns the files in any order. This has to be sorted. But when given as argument, the user should be allowed to set any order. This restores the behaviour before 9848a94e2a. [ original upstream message ]

tests: fix test-profile to not depend on HGPROF environment variable The test-profile test would fail if the user had HGPROF set to another profiler in their environment. This fix makes the test independent of that environment variable. Reverts the previous attempt to fix this, which was not cross platoform. [ original upstream message ]

Merge with stable

tests: inform on Windows about unnecessary glob lines When glob lines directly match on windows, "/" (and not "\") was output in the path on the line. No glob matching is necessary in this case. The test output will look like this (when 5 tests have passed and no 4 has an unnecessary glob): ... Info, unnecessary glob: info about some/thing (glob) .. [ original upstream message ]

tests: quickly check if the glob line already matches the output This happens when a path with "/" as only glob char is matched on a non windows platform. (Currently one third of all glob matches.) The slowdown on windows and the speedup on other os are neglectable. [ original upstream message ]

export: show 'Date' header in a format that also is readable for humans 'export' is the official export format and used by patchbomb, but it would only show date as a timestamp that most humans might find it hard to relate to. It would be very convenient when reviewing a patch to be able to see what timestamp the patch will end up with. Mercurial has always used util.parsedate for parsing these headers. It can handle 'all' date formats, so we could just as well use a readable one. 'export' will now use the format used by 'log' - which is the format described as 'Unix date format' in the templating help. We assume that all parsers of '# HG changeset patch'es can handle that. [ original upstream message ]

Merge with stable

test: display used python hash seed We keep using a random seed for each run, but we "compute" it ourself to be able to reproduce a failed test run. [ original upstream message ]

Merge with stable

run-tests: do not fail on empty tsttest file Initialize n for not failing on empty tsttest files. [ original upstream message ]

Merge with stable

run-tests.py: inherit PYTHONHASHSEED from environment if set This makes it possible to fix the seed by using for instance PYTHONHASHSEED=7 ./run-tests.py ... This can be very convenient when trying to debug problems that are influenced by hash values. Try different seed values until you find one that triggers the bad behaviour and then keep that while debugging. The value 0 will restore default Python behavior and disable randomization. [ original upstream message ]

Merge with stable

documentation: update to new filter names Changeset f3b21beb9802 change filter names but forgot some documentation updates. [ original upstream description ]

Merge with stable

run-tests.py: don't let hg run interactively in debug mode In normal test mode stdin is closed and hg is thus not interactive. In --debug mode stdin is inherited from the running console and to the tests, and hg could thus wait in prompts when running on Windows. See http://selenic.com/pipermail/mercurial-devel/2013-January/047548.html . Instead set ui.interactive=False to make Mercurial non-interactive. Other commands might still work differently in the --debug environment. This should solve the problem with hg waiting for input but still make it possible to add --debugger to hg in a test and run run-tests.py with --debug. [ original upstream message ]

run-tests.py: backout "don't use console for stdin when running in debug mode" f5842787a958 caused that some kind of interactive debugging no longer was possible - such as running hg with --debugger in a test run with run-tests.py --debug . [ original upstream message ]

Merge with stable

get-with-headers: add a --headeronly switch In some case we do not care about the actual rendering. [ original upstream message ]

tests: make test-hgweb.t output stable Instability introduced in combination of a4d7fd7ad1f7 and e389a25e7e60. [ original upstream message ]

serve: don't send any content headers with 304 responses Fixes HTTP protocol violation introduced in cf5c76017e11. 'hg serve' would show a stacktrace when loading pages that not had been modified. There was test coverage for this, but the wrong response headers wasn't shown and thus not detected. [ original upstream message ]

destroyed: drop complex branchcache rebuilt logic The strip code used a trick to lower the cost of branchcache update after a strip. However is less necessary since we have branchcache collaboration. Invalid branchcache are likely to be cheaply rebuilt again a near subset of the repo. Moreover, this trick would need update to be relevant in the now filtered repository world. It currently update the unfiltered branchcache that few people cares about. Make it smarter on that aspect would need complexes update of the calling logic So this mechanism is: - Arguably needed, - Currently irrelevant, - Hard to update and I'm dropping it. We now update the branchcache in all case by courtesy of the read only reader. This changeset have a few expected impact on the testsuite are different cache are updated. [ original upstream message ]

branchmap: update cache of 'unserved' filter on new changesets The `commitctx` and `addchangegroup` methods of repo upgrade branchcache after completion. This behavior aims to keep the branchcache in sync for read only process as hgweb. See ee317dbfb9d0 for details. Since changelog filtering is used, those calls only update the cache for unfiltered repo. One of no interest for typical read only process like hgweb. Note: By chance in basic case, `repo.unfiltered() == repo.filtered('unserved')` This changesets have the "unserved" cache updated instead. I think this is the only cache that matter for hgweb. We could imagine updating all possible branchcaches instead but: - I'm not sure it would have any benefit impact. It may even increase the odd of all cache being invalidated. - This is more complicated change. So I'm going for updating a single cache only which is already better that updating a cache nobody cares about. This changeset have a few expected impact on the testsuite are different cache are updated. [ original upstream message ]

tests: run with PYTHONHASHSEED=random Python set and dict iteration order is in principle undefined but usually 'quite stable'. Setting PYTHONHASHSEED=random will make the iteration order more random in Python 2.6.8 and 2.7.3 and where it has been backported. This can thus help spot dependencies on undefined behaviour and prevent future problems. [ original upstream message ]

run-tests: exit cleanly if parallel run is interrupted If interrupted while running with "--jobs N", run-tests asynchronously spewed a bunch of output and backtraces from both the master and slave processes, leaving the terminal full of goop. This patch makes it behave more sensibly. [ original upstream message ]

filtering: rename filters to their antonyms Now that changelog filtering is in place, it's become evident that naming the filters according to the set of revs _not_ included in the filtered changelog is confusing. This is especially evident in the collaborative branch cache scheme. This changes the names of the filters to reflect the revs that _are_ included: hidden -> visible unserved -> served mutable -> immutable impactable -> base repoview.filteredrevs is renamed to filterrevs, so that callers read a bit more sensibly, e.g.: filterrevs('visible') # filter revs according to what's visible [ original upstream message ]

Merge with default

test: improve grammar and spelling in branchcache note See: 769eb1b179b5

Merge with stable

hghave: introduce a test (unused) for cvs >= 1.12 [ original upstream message ]

clfilter: enforce hidden changeset globally The dispatch code now enables filtering of "hidden" changesets globally. The filter is installed before command and extension invocation. The `--hidden` switch is now global and disables this filtering for any command. Code in log dedicated to changeset exclusion is removed as this global filtering has the same effect. [ original upstream message ]

branchcache: add note about cache invalidation to test-keyword.t [Should've been included in aff706b3a21c.] --Kevin Bullock <kbullock@ringworld.org> [ original upstream message ]

clfilter: add mutable filtering It filters all mutable changesets, leaving only public changeset unfiltered. This filtering set is expected to be much more stable that the previous one as public changeset are unlikely to disapear. The only official use of this filter is for branchcache. [ original upstream message ]

run-tests.py: fix handling of symlink to the right python Before: a symlink for python in BINDIR was sometimes created, but it was never updated when a different Python was used and it was never removed. An invalid python could thus be left around and used when testing with --local. Now: the symlink is removed when wrong and created when necessary. The mechanism for finding the right name (python or python.exe) also had to be simplified and made more explicit. [ original upstream message ]

Merge with stable

branchmap: allow to use cache of subset Filtered repository are *subset* of unfiltered repository. This means that a filtered branchmap could be use to compute the unfiltered version. And filtered version happen to be subset of each other: - "all() - unserved()" is a subset of "all() - hidden()" - "all() - hidden()" is a subset of "all()" This means that branchmap with "unfiltered" filter can be used as a base for "hidden" branchmap that itself could be used as a base for unfiltered branchmap. unserved < hidden < None This changeset implements this mechanism. If the on disk branchcache is not valid we use the branchcache of the nearest subset as base instead of computing it from scratch. Such fallback can be cascaded multiple time is necessary. Note that both "hidden" and "unserved" set are a bit volatile. We will add more stable filtering in next changesets. This changeset enables collaboration between no filtering and "unserved" filtering. Fixing performance regression introduced by 47f00b0de337 [ original upstream message ]