Mon, 02 Apr 2012 17:02:03 -0500 tests: shorten post-test sleeps stable
Matt Mackall <mpm@selenic.com> [Mon, 02 Apr 2012 17:02:03 -0500] rev 1059
tests: shorten post-test sleeps This helps expose races [ original upstream message ]
Mon, 02 Apr 2012 17:28:55 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Mon, 02 Apr 2012 17:28:55 +0100] rev 1058
Merge with stable
Fri, 30 Mar 2012 22:08:46 +0100 record: allow splitting of hunks by manually editing patches stable
A. S. Budden <abudden@gmail.com> [Fri, 30 Mar 2012 22:08:46 +0100] rev 1057
record: allow splitting of hunks by manually editing patches It is possible that unrelated changes in a file are on sequential lines. The current record extension does not allow these to be committed independently. An example use case for this is in software development for deeply embedded real-time systems. In these environments, it is not always possible to use a debugger (due to time-constraints) and hence inline UART-based printing is often used. When fixing a bug in a module, it is often convenient to add a large number of 'printf's (linked to the UART via a custom fputc) to the module in order to work out what is going wrong. printf is a very slow function (and also variadic so somewhat frowned upon by the MISRA standard) and hence it is highly undesirable to commit these lines to the repository. If only a partial fix is implemented, however, it is desirable to commit the fix without deleting all of the printf lines. This is also simplifies removal of the printf lines as once the final fix is committed, 'hg revert' does the rest. It is likely that the printf lines will be very near the actual fix, so being able to split the hunk is very useful in this case. There were two alternatives I considered for the user interface. One was to manually edit the patch, the other to allow a hunk to be split into individual lines for consideration. The latter option would require a significant refactor of the record module and is less flexible. While the former is potentially more complicated to use, this is a feature that is likely to only be used in certain exceptional cases (such as the use case proposed above) and hence I felt that the complexity would not be a considerable issue. I've also written a follow-up patch that refactors the 'prompt' code to base everything on the choices variable. This tidies up and clarifies the code a bit (removes constructs like 'if ret == 7' and removes the 'e' option from the file scope options as it's not relevant there. It's not really a necessity, so I've excluded it from this submission for now, but I can send it separately if there's a desire and it's on bitbucket (see below) in the meantime. Possible future improvements include: * Tidying up the 'prompt' code to base everything on the choices variable. This would allow entries to be removed from the prompt as currently 'e' is offered even for entire file patches, which is currently unsupported. * Allowing the entire file (or even multi-file) patch to be edited manually: this would require quite a large refactor without much benefit, so I decided to exclude it from the initial submission. * Allow the option to retry if a patch fails to apply (this is what Git does). This would require quite a bit of refactoring given the current 'hg record' implementation, so it's debatable whether it's worth it. Output is similar to existing record user interface except that an additional option ('e') exists to allow manual editing of the patch. This opens the user's configured editor with the patch. A comment is added to the bottom of the patch explaining what to do (based on Git's one). A large proportion of the changeset is test-case changes to update the options reported by record (Ynesfdaq? instead of Ynsfdaq?). Functional changes are in record.py and there are some new test cases in test-record.t. [ original upstream message ]
Sat, 31 Mar 2012 10:44:31 -0500 tests: make hghave handle exec bit on Linux with vfat stable
Matt Mackall <mpm@selenic.com> [Sat, 31 Mar 2012 10:44:31 -0500] rev 1056
tests: make hghave handle exec bit on Linux with vfat [ original upstream message ]
Sat, 31 Mar 2012 10:44:31 -0500 tests: teach hghave to actually test for symlink support stable
Matt Mackall <mpm@selenic.com> [Sat, 31 Mar 2012 10:44:31 -0500] rev 1055
tests: teach hghave to actually test for symlink support [ original upstream message ]
Sat, 31 Mar 2012 17:14:32 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sat, 31 Mar 2012 17:14:32 +0100] rev 1054
Merge with stable
Sat, 11 Sep 2010 10:57:35 +0200 tests: fix incompatibility with python-2.4 in test-hgweb stable
Dirkjan Ochtman <dirkjan@ochtman.nl> [Sat, 11 Sep 2010 10:57:35 +0200] rev 1053
tests: fix incompatibility with python-2.4 in test-hgweb Thanks to lcantey for catching it. [ original upstream message ]
Wed, 08 Sep 2010 15:11:35 +0200 tests: extend get-with-headers to support cache testing stable
Dirkjan Ochtman <dirkjan@ochtman.nl> [Wed, 08 Sep 2010 15:11:35 +0200] rev 1052
tests: extend get-with-headers to support cache testing [ original upstream message ]
Wed, 14 Apr 2010 17:58:10 +0900 pylint, pyflakes: remove unused or duplicate imports stable
Nicolas Dumazet <nicdumz.commits@gmail.com> [Wed, 14 Apr 2010 17:58:10 +0900] rev 1051
pylint, pyflakes: remove unused or duplicate imports [ original upstream message ]
Sat, 11 Feb 2012 14:18:19 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sat, 11 Feb 2012 14:18:19 +0000] rev 1050
Merge with stable
Tue, 07 Feb 2012 18:47:16 +0100 mq: restore _branchtags() fast path (issue3223) stable
Patrick Mezard <patrick@mezard.eu> [Tue, 07 Feb 2012 18:47:16 +0100] rev 1049
mq: restore _branchtags() fast path (issue3223) Since a5917346c72e, mq saves the nodeid of the first applied patch to cache/branchheads, which breaks the optimized cache handling introduced in fbf8320f25c8. The problem is the revision being committed is appended to mqrepo.applied after the commit succeeds, which means mqrepo._branchtags() performs a regular update and write the first applied patch to the branch cache. One solution is to set a context variable _committingpatch on the mqrepo while it is committing a patch and to take it in account when deciding to fast-path mqrepo._branchtags(). Not really elegant but it works. The changes to test-mq-caches.t reverse changes introduced by a5917346c72e. The cache should not have been updated with mq records. The changes to test-keyword.t are indirectly caused by a5917346c72e. Reported and analyzed by Yuya Nishihara <yuya@tcha.org> Notes: - qpush still makes a slow path _branchtags() call when checking heads. Maybe this can be optimized. - be careful when merging this patch in default as secretcommit() was renamed newcommit() right after the end of the code freeze. [ original upstream message ]
Wed, 08 Feb 2012 16:56:00 +0000 tests: tighten checks for octal escapes in shell printf. stable
Jim Hague <jim.hague@acm.org> [Wed, 08 Feb 2012 16:56:00 +0000] rev 1048
tests: tighten checks for octal escapes in shell printf. printf on AIX default shell ksh (89) says \1 is an invalid escape. It insists on at least 2 digits. This causes failures in test-keyword.t and test-status.t. check-code.py already looks out for \NNN and recommends using Python for outputting octal values. Extend the check to \NN and \N and fix up resulting failures. [ original upstream message ]
Mon, 23 Jan 2012 16:21:12 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Mon, 23 Jan 2012 16:21:12 +0100] rev 1047
Merge with stable
Sat, 14 Jan 2012 01:56:27 +0100 run-tests: expand user in --with-hg stable
Mads Kiilerich <mads@kiilerich.com> [Sat, 14 Jan 2012 01:56:27 +0100] rev 1046
run-tests: expand user in --with-hg This makes it possible to run: $ ./run-tests.py --with-hg=~/hg-bin/hg [ original upstream message ]
Fri, 20 Jan 2012 01:24:16 +0100 tests: let run-tests.py default to use 'sh' in $PATH instead of '/bin/sh' stable
Mads Kiilerich <mads@kiilerich.com> [Fri, 20 Jan 2012 01:24:16 +0100] rev 1045
tests: let run-tests.py default to use 'sh' in $PATH instead of '/bin/sh' This makes it easier to run tests on systems that have a usable sh in the search path but not in the standard location. [ original upstream message ]
Sat, 14 Jan 2012 01:55:50 +0100 tests: add 'set -x' to the .t sh scripts in run-tests.py debug mode stable
Mads Kiilerich <mads@kiilerich.com> [Sat, 14 Jan 2012 01:55:50 +0100] rev 1044
tests: add 'set -x' to the .t sh scripts in run-tests.py debug mode This makes -d output much more readable when debugging the test framework or very strange test failures. [ original upstream message ]
Thu, 19 Jan 2012 02:01:05 +0100 Merge with default stable
Christian Ebert <blacktrash@gmx.net> [Thu, 19 Jan 2012 02:01:05 +0100] rev 1043
Merge with default
Sun, 15 Jan 2012 13:37:33 +0100 Update filectx.cmp monkeypatch to handle '\1\n' at start of file
Christian Ebert <blacktrash@gmx.net> [Sun, 15 Jan 2012 13:37:33 +0100] rev 1042
Update filectx.cmp monkeypatch to handle '\1\n' at start of file Analogous to 012b285cf643 in mercurial main.
Wed, 18 Jan 2012 16:46:15 +0100 phases: use nodemap to check for missing nodes stable
Sune Foldager <cryo@cyanite.org> [Wed, 18 Jan 2012 16:46:15 +0100] rev 1041
phases: use nodemap to check for missing nodes [ original upstream message ]
Thu, 19 Jan 2012 01:50:48 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Thu, 19 Jan 2012 01:50:48 +0100] rev 1040
Merge with stable
Wed, 11 Jan 2012 15:38:31 +0100 tests: add htmlcov option stable
Markus Zapke-Gr?ndemann <info@keimlink.de> [Wed, 11 Jan 2012 15:38:31 +0100] rev 1039
tests: add htmlcov option [ original upstream message ]
Thu, 12 Jan 2012 14:39:02 -0600 run-tests: use a list comprehension instead of map stable
Matt Mackall <mpm@selenic.com> [Thu, 12 Jan 2012 14:39:02 -0600] rev 1038
run-tests: use a list comprehension instead of map [ original upstream message ]
Wed, 11 Jan 2012 15:37:25 +0100 tests: fix omit path list stable
Markus Zapke-Gr?ndemann <info@keimlink.de> [Wed, 11 Jan 2012 15:37:25 +0100] rev 1037
tests: fix omit path list All directories need a trailing asterisk. Otherwise the files are not excluded from coverage. [ original upstream message ]
Fri, 09 Dec 2011 00:10:00 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Fri, 09 Dec 2011 00:10:00 +0100] rev 1036
Merge with stable
Thu, 08 Dec 2011 14:32:44 -0600 branch: warn on branching stable
Matt Mackall <mpm@selenic.com> [Thu, 08 Dec 2011 14:32:44 -0600] rev 1035
branch: warn on branching [ orginal upstream message ]
Thu, 24 Nov 2011 06:43:43 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Thu, 24 Nov 2011 06:43:43 +0000] rev 1034
Merge with stable
Mon, 21 Nov 2011 01:49:20 +0100 tests: use an alias to make msys 'pwd' return paths with forward slashes stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 21 Nov 2011 01:49:20 +0100] rev 1033
tests: use an alias to make msys 'pwd' return paths with forward slashes [ original upstream message ]
Mon, 21 Nov 2011 01:49:20 +0100 tests: skip cvs tests with msys on windows stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 21 Nov 2011 01:49:20 +0100] rev 1032
tests: skip cvs tests with msys on windows They will fail with weird 'ssh' errors. [ original upstream message ]
Mon, 21 Nov 2011 01:49:20 +0100 tests: introduce 'hghave msys' to skip tests that would fail because of msys stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 21 Nov 2011 01:49:20 +0100] rev 1031
tests: introduce 'hghave msys' to skip tests that would fail because of msys [ original upstream message ]
Thu, 24 Nov 2011 06:42:48 +0000 Merge with default stable
Christian Ebert <blacktrash@gmx.net> [Thu, 24 Nov 2011 06:42:48 +0000] rev 1030
Merge with default
(0) -1000 -300 -100 -50 -30 +30 +50 +100 +300 tip