Fri, 22 Jun 2012 13:40:23 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Fri, 22 Jun 2012 13:40:23 +0100] rev 1113
Merge with stable
Fri, 18 May 2012 12:45:47 -0700 strip: incrementally update the branchheads cache after a strip stable
Joshua Redstone <joshua.redstone@fb.com> [Fri, 18 May 2012 12:45:47 -0700] rev 1112
strip: incrementally update the branchheads cache after a strip This function augments strip to incrementally update the branchheads cache rather than recompute it from scratch. This speeds up the performance of strip and rebase on repos with long history. The performance optimization only happens if the revisions stripped are all on the same branch and the parents of the stripped revisions are also on that same branch. This adds a few test cases, particularly one that reproduces the extra heads that mpm observed. [ original upstream message ]
Thu, 21 Jun 2012 14:04:15 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Thu, 21 Jun 2012 14:04:15 +0100] rev 1111
Merge with stable
Mon, 07 Nov 2011 13:46:41 -0600 run-tests: replace inline python handling with more native scheme stable
Matt Mackall <mpm@selenic.com> [Mon, 07 Nov 2011 13:46:41 -0600] rev 1110
run-tests: replace inline python handling with more native scheme Normally changes in tests are reported like this in diffs: $ cat foo - a + b Using -i mode lets us update tests when the new results are correct and/or populate tests with their output. But with the standard doctest framework, inline Python sections in tests changes instead result in a big failure report that's unhelpful. So here, we replace the doctest calls with a simple compile/eval loop. [ original upstream message - missed change to heredoctest ]
Tue, 01 Nov 2011 12:25:54 -0700 tests: fix readline escape characters in heredoctest.py/test-url.py stable
Brodie Rao <brodie@bitheap.org> [Tue, 01 Nov 2011 12:25:54 -0700] rev 1109
tests: fix readline escape characters in heredoctest.py/test-url.py This fix mirrors the changes made to test-doctest.py in b856071435f7 and 967adcf5910d. Without this change, tests running heredoctest.py can fail on certain versions of OS X when TERM is set to xterm-256color: $ /opt/local/Library/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents/MacOS/Python -m heredoctest <<EOF > >>> open('b', 'w').write('this' * 1000) > EOF + \x1b[?1034h (no-eol) (esc) A similar problem occurs with test-url.py: $ ./run-tests.py test-url.py --- .../tests/test-url.py.out +++ .../tests/test-url.py.err @@ -0,0 +1 @@ + ERROR: .../test-url.py output changed ! Failed test-url.py: output changed # Ran 1 tests, 0 skipped, 1 failed. [ original upstream message ]
Thu, 13 Oct 2011 17:54:35 +0200 tests: remove temp doctest file when finished running it stable
Idan Kamara <idankk86@gmail.com> [Thu, 13 Oct 2011 17:54:35 +0200] rev 1108
tests: remove temp doctest file when finished running it [ original upstream message ]
Wed, 12 Oct 2011 22:01:13 +0200 tests: add helper script for processing doctests read from stdin stable
Idan Kamara <idankk86@gmail.com> [Wed, 12 Oct 2011 22:01:13 +0200] rev 1107
tests: add helper script for processing doctests read from stdin Writes stdin to a temp file and doctests it. In the future we might want to spare the temp file and directly call into doctest. Also, with some tweaking it seems possible to adjust the line numbers reported in an error report so they match the ones in the original file. [ original upstream message ]
Thu, 21 Jun 2012 03:05:02 +0200 tests: prepare get-with-headers.py for MSYS stable
Mads Kiilerich <mads@kiilerich.com> [Thu, 21 Jun 2012 03:05:02 +0200] rev 1106
tests: prepare get-with-headers.py for MSYS get-with-headers.py took the http GET parameter as a command line parameter that had to start with '/'. MSYS on windows will mangle such paths. Instead of applying a workaround everywhere (such as an extra '/') we let get-with-headers.py add the mandatory '/'. That is consistent with the url path handling in the Mercurial url class. A few tests sent 'GET ?cmd=...' which is invalid. They will now send 'GET /?cmd=...'. This will not enable any tests for being run on windows - only remove one reason they were disabled. [ original upstream message ]
Wed, 20 Jun 2012 23:41:21 +0200 tests: hghave outer-repo should be true even if a bad repo is found stable
Mads Kiilerich <mads@kiilerich.com> [Wed, 20 Jun 2012 23:41:21 +0200] rev 1105
tests: hghave outer-repo should be true even if a bad repo is found Only the abort message 'no repository found' is a reliable indication that there is no outer repo. [ original upstream message ]
Wed, 20 Jun 2012 23:41:21 +0200 tests: add missing no-outer-repo requirements stable
Mads Kiilerich <mads@kiilerich.com> [Wed, 20 Jun 2012 23:41:21 +0200] rev 1104
tests: add missing no-outer-repo requirements Outer repos (if any) will now never be touched by the tests. But it is better to run without any repos around the tmp directory. [ original upstream message ]
Tue, 19 Jun 2012 16:00:31 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Tue, 19 Jun 2012 16:00:31 +0100] rev 1103
Merge with stable
Fri, 15 Jun 2012 00:02:27 +0200 tests: introduce hghave hardlinks stable
Mads Kiilerich <mads@kiilerich.com> [Fri, 15 Jun 2012 00:02:27 +0200] rev 1102
tests: introduce hghave hardlinks Some tests can't be run on FAT filesystems because it doesn't support hardlinks. [ original upstream message ]
Fri, 15 Jun 2012 00:02:27 +0200 tests/hghave: test that the inotify unix socket actually can be created stable
Mads Kiilerich <mads@kiilerich.com> [Fri, 15 Jun 2012 00:02:27 +0200] rev 1101
tests/hghave: test that the inotify unix socket actually can be created Inotify do not work on FAT filesystems. [ original upstream message ]
Fri, 15 Jun 2012 00:02:27 +0200 tests/hghave: test that a fifo actually can be created on the filesystem stable
Mads Kiilerich <mads@kiilerich.com> [Fri, 15 Jun 2012 00:02:27 +0200] rev 1100
tests/hghave: test that a fifo actually can be created on the filesystem Some tests were failing on FAT filesystems. [ original upstream message ]
Fri, 15 Jun 2012 00:02:27 +0200 tests/hghave: consistently use dir='.', prefix=tempprefix for tempfiles stable
Mads Kiilerich <mads@kiilerich.com> [Fri, 15 Jun 2012 00:02:27 +0200] rev 1099
tests/hghave: consistently use dir='.', prefix=tempprefix for tempfiles Some feature tests were done in the wrong directory and could thus give the wrong result. [ original upstream message ]
Thu, 14 Jun 2012 12:54:54 +0200 tests/hghave: extract hghave.py stable
Adrian Buehlmann <adrian@cadifra.com> [Thu, 14 Jun 2012 12:54:54 +0200] rev 1098
tests/hghave: extract hghave.py hghave is degraded to a bare script, moving the functions to hghave.py so they can be shared later on. [ original upstream message ]
Mon, 11 Jun 2012 13:56:02 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Mon, 11 Jun 2012 13:56:02 +0100] rev 1097
Merge with stable
Mon, 11 Jun 2012 01:40:51 +0200 tests: add missing trailing 'cd ..' stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 11 Jun 2012 01:40:51 +0200] rev 1096
tests: add missing trailing 'cd ..' Many tests didn't change back from subdirectories at the end of the tests ... and they don't have to. The missing 'cd ..' could always be added when another test case is added to the test file. This change do that tests (99.5%) consistently end up in $TESTDIR where they started, thus making it simpler to extend them or move them around. [ original upstream message ]
Sun, 10 Jun 2012 18:50:42 +0200 tests: convert some 'hghave symlink' to #if stable
Mads Kiilerich <mads@kiilerich.com> [Sun, 10 Jun 2012 18:50:42 +0200] rev 1095
tests: convert some 'hghave symlink' to #if This will enable some tests for windows. [ original upstream message ]
Sun, 10 Jun 2012 18:50:42 +0200 tests: use the right directory for running hghave from run-tests.py stable
Mads Kiilerich <mads@kiilerich.com> [Sun, 10 Jun 2012 18:50:42 +0200] rev 1094
tests: use the right directory for running hghave from run-tests.py [ original upstream message ]
Sun, 10 Jun 2012 18:50:42 +0200 tests: make .t tests stop immediately if a cd fails stable
Mads Kiilerich <mads@kiilerich.com> [Sun, 10 Jun 2012 18:50:42 +0200] rev 1093
tests: make .t tests stop immediately if a cd fails This prevents tests from escaping from TESTTMP as a consequence of a failing directory creation. [ original upstream message ]
Sun, 10 Jun 2012 16:32:22 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sun, 10 Jun 2012 16:32:22 +0100] rev 1092
Merge with stable
Fri, 08 Jun 2012 15:11:05 +0200 tests/hghave: implement #if true / #if false stable
Adrian Buehlmann <adrian@cadifra.com> [Fri, 08 Jun 2012 15:11:05 +0200] rev 1091
tests/hghave: implement #if true / #if false For unconditionally testing / skipping a section. Useful for testing the test infrastructure in test-run-tests.t and for debugging/developing tests. [ original upstream message ]
Sun, 10 Jun 2012 03:05:59 +0200 tests/run-tests: avoid C:/ in arguments stable
Adrian Buehlmann <adrian@cadifra.com> [Sun, 10 Jun 2012 03:05:59 +0200] rev 1090
tests/run-tests: avoid C:/ in arguments MSYS replaces C:/... in arguments with C;... as it interprets the C:/ as a colon separated POSIX path list. The colon is replaced with ; (path separator on Windows) according to http://www.mingw.org/wiki/Posix_path_conversion So we must not replace \ with / for neither $TESTTMP nor $TESTDIR, but we have to keep replacing \ with / for the Popen4 call of function hghave. If we don't do the latter, test-run-tests.t will fail with $ python run-tests.py --local test-run-tests.t --- C:\Users\adi\hgrepos\hg-main\tests\test-run-tests.t +++ C:\Users\adi\hgrepos\hg-main\tests\test-run-tests.t.err @@ -70,6 +70,7 @@ tested #else $ echo skipped + skipped #endif #if false An additional tweak in test-ssh.t is needed that globs away an encoded path, as it can't be translated back to $TESTTMP, because the backslashes in the output have been already encoded as %5C. This patch makes test-ssh.t pass in MSYS on Windows. [ original upstream message ]
Sun, 27 May 2012 18:25:04 +0200 hghave: wrap command in 'sh -c "..."' for has_pyflakes() stable
Adrian Buehlmann <adrian@cadifra.com> [Sun, 27 May 2012 18:25:04 +0200] rev 1089
hghave: wrap command in 'sh -c "..."' for has_pyflakes() Without this, the has_pyflakes() check always fails in MSYS on Windows. [ original upstream message ]
Fri, 08 Jun 2012 15:11:05 +0200 tests/run-tests: use $TMP on Windows (issue3490) stable
Adrian Buehlmann <adrian@cadifra.com> [Fri, 08 Jun 2012 15:11:05 +0200] rev 1088
tests/run-tests: use $TMP on Windows (issue3490) This is just a short-term workaround for that issue. More work needs to be done on scmutil.canonpath & friends. $TMP on Windows is specified to be defined, and it has correct casing, so we can use that as the default dir for tempfile.mkdtemp on Windows. [ original upstream message ]
Tue, 05 Jun 2012 00:20:53 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Tue, 05 Jun 2012 00:20:53 +0100] rev 1087
Merge with stable
Fri, 01 Jun 2012 02:25:12 +0200 tests: introduce c-style conditional sections in .t tests stable
Mads Kiilerich <mads@kiilerich.com> [Fri, 01 Jun 2012 02:25:12 +0200] rev 1086
tests: introduce c-style conditional sections in .t tests This makes it possible to have conditional sections like: #if windows $ echo foo foo #else $ echo bar bar #endif The directives and skipped sections are treated like comments, so don't interleave them with commands and their output. The parameters to #if are evaluated while preparing the test by passing them over to hghave. Requirements can thus be negated with 'no-' prefix, and multiple requirements must all be true to return true. [ original upstream message ]
Wed, 30 May 2012 14:28:57 +0200 run-tests: don't add python lines to expected dict stable
Adrian Buehlmann <adrian@cadifra.com> [Wed, 30 May 2012 14:28:57 +0200] rev 1085
run-tests: don't add python lines to expected dict For test input lines of *.t files starting with ' >>> ', the code block for ' >>> ' 609: if l.startswith(' >>> '): # python inlines 610: after.setdefault(pos, []).append(l) was (unsurprisingly) executed, but because there was an "if" instead of an "elif" on the condition "l.startswith(' ... ')", program execution proceeded to line 636 635: elif l.startswith(' '): # results 636: # queue up a list of expected results 637: expected.setdefault(pos, []).append(l[2:]) due to the fact that if l starts with ' >>> ' it also starts with ' '. The net effect was that python command lines in *.t files were (surprisingly) also added to the "expected" dict. This caused no externally observable bad behavior, as the "expected" dict was not consulted for these lines. [ original upstream message ]
Sun, 03 Jun 2012 19:35:23 +0200 run-test: replace backslashes in TESTDIR stable
Adrian Buehlmann <adrian@cadifra.com> [Sun, 03 Jun 2012 19:35:23 +0200] rev 1084
run-test: replace backslashes in TESTDIR This may cause troubles in MSYS on Windows. [ original upstream message ]
Sat, 02 Jun 2012 10:09:59 +0200 Merge with default stable
Christian Ebert <blacktrash@gmx.net> [Sat, 02 Jun 2012 10:09:59 +0200] rev 1083
Merge with default
Thu, 31 May 2012 12:47:50 +0200 Update copyleft
Christian Ebert <blacktrash@gmx.net> [Thu, 31 May 2012 12:47:50 +0200] rev 1082
Update copyleft
Thu, 31 May 2012 12:47:50 +0200 Wlock cmdutil.copy wrapper
Christian Ebert <blacktrash@gmx.net> [Thu, 31 May 2012 12:47:50 +0200] rev 1081
Wlock cmdutil.copy wrapper Expanding/shrinking happens outside the wrapped copy function; therefore write lock the repo.
Thu, 31 May 2012 12:47:50 +0200 Support commit --amend (issue3471)
Christian Ebert <blacktrash@gmx.net> [Thu, 31 May 2012 12:47:50 +0200] rev 1080
Support commit --amend (issue3471) Include a test as well.
Thu, 31 May 2012 12:47:49 +0200 Rename kwt.record attribute to kwt.postcommit
Christian Ebert <blacktrash@gmx.net> [Thu, 31 May 2012 12:47:49 +0200] rev 1079
Rename kwt.record attribute to kwt.postcommit A more general descriptive name, as the attribute will be used for commit --amend as well.
Fri, 18 May 2012 01:21:54 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Fri, 18 May 2012 01:21:54 +0100] rev 1078
Merge with stable
Tue, 15 May 2012 14:37:49 -0500 hgext: mark all first-party extensions as such stable
Augie Fackler <raf@durin42.com> [Tue, 15 May 2012 14:37:49 -0500] rev 1077
hgext: mark all first-party extensions as such [ original upstream message ]
Fri, 18 May 2012 01:21:22 +0100 Merge with default stable
Christian Ebert <blacktrash@gmx.net> [Fri, 18 May 2012 01:21:22 +0100] rev 1076
Merge with default
Sun, 13 May 2012 14:26:26 +0100 Intentionally ignore check-code warning about unwrapped ui message
Christian Ebert <blacktrash@gmx.net> [Sun, 13 May 2012 14:26:26 +0100] rev 1075
Intentionally ignore check-code warning about unwrapped ui message
Sun, 13 May 2012 14:39:47 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sun, 13 May 2012 14:39:47 +0100] rev 1074
Merge with stable
Sat, 12 May 2012 16:00:57 +0200 cleanup: "not x in y" -> "x not in y" stable
Brodie Rao <brodie@sf.io> [Sat, 12 May 2012 16:00:57 +0200] rev 1073
cleanup: "not x in y" -> "x not in y" [ original upstream message ]
Sat, 12 May 2012 16:02:45 +0200 cleanup: replace naked excepts with more specific ones stable
Brodie Rao <brodie@sf.io> [Sat, 12 May 2012 16:02:45 +0200] rev 1072
cleanup: replace naked excepts with more specific ones [ original upstream message ]
Sat, 12 May 2012 16:00:53 +0200 cleanup: replace hasattr() usage with getattr() in hghave stable
Brodie Rao <brodie@sf.io> [Sat, 12 May 2012 16:00:53 +0200] rev 1071
cleanup: replace hasattr() usage with getattr() in hghave [ original upstream message ]
Sat, 12 May 2012 15:56:23 +0200 cleanup: "x != None" -> "x is not None" stable
Brodie Rao <brodie@sf.io> [Sat, 12 May 2012 15:56:23 +0200] rev 1070
cleanup: "x != None" -> "x is not None" [ original upstream message ]
Sat, 12 May 2012 15:54:54 +0200 cleanup: eradicate long lines stable
Brodie Rao <brodie@sf.io> [Sat, 12 May 2012 15:54:54 +0200] rev 1069
cleanup: eradicate long lines [ original upstream message ]
Tue, 08 May 2012 15:46:51 -0500 tests: set a standard terminal type stable
Matt Mackall <mpm@selenic.com> [Tue, 08 May 2012 15:46:51 -0500] rev 1068
tests: set a standard terminal type This makes test-ui-color.py happy when run in a dumb terminal. Spotted by Jesse Glick <jesse.glick@oracle.com> [ original upstream message ]
Thu, 10 May 2012 18:21:15 +0200 repair: no need to call filterunknown() in strip() stable
Patrick Mezard <patrick@mezard.eu> [Thu, 10 May 2012 18:21:15 +0200] rev 1067
repair: no need to call filterunknown() in strip() Calling strip() will eventually trigger localrepo.destroyed() which will invalidate _parseroots. It will call filterunknown() upon reload. Changes to test-keyword.t are related to commit --debug running after either qpop or rollback. [ original upstream message ]
Sun, 29 Apr 2012 16:58:42 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sun, 29 Apr 2012 16:58:42 +0100] rev 1066
Merge with stable
Sat, 28 Apr 2012 01:22:47 +0200 tests: don't require 'hg' without extension on windows stable
Mads Kiilerich <mads@kiilerich.com> [Sat, 28 Apr 2012 01:22:47 +0200] rev 1065
tests: don't require 'hg' without extension on windows Hackable uses hg.exe instead. [ original upstream message ]
Fri, 06 Apr 2012 22:53:24 +0200 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Fri, 06 Apr 2012 22:53:24 +0200] rev 1064
Merge with stable
Wed, 04 Apr 2012 15:59:56 +0200 hghave: remove symlink test made useless by ac0da5caebec stable
Patrick Mezard <patrick@mezard.eu> [Wed, 04 Apr 2012 15:59:56 +0200] rev 1063
hghave: remove symlink test made useless by ac0da5caebec [ original upstream message ]
Wed, 04 Apr 2012 09:31:47 +0200 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Wed, 04 Apr 2012 09:31:47 +0200] rev 1062
Merge with stable
Tue, 03 Apr 2012 19:06:35 +0200 tests: make tests work if directory contains special characters stable
Thomas Arendsen Hein <thomas@intevation.de> [Tue, 03 Apr 2012 19:06:35 +0200] rev 1061
tests: make tests work if directory contains special characters With this quoting tests will work e.g. in "/tmp/foo bar/mercurial/". [ original upstream message ]
Tue, 03 Apr 2012 16:34:50 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Tue, 03 Apr 2012 16:34:50 +0100] rev 1060
Merge with stable
Mon, 02 Apr 2012 17:02:03 -0500 tests: shorten post-test sleeps stable
Matt Mackall <mpm@selenic.com> [Mon, 02 Apr 2012 17:02:03 -0500] rev 1059
tests: shorten post-test sleeps This helps expose races [ original upstream message ]
Mon, 02 Apr 2012 17:28:55 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Mon, 02 Apr 2012 17:28:55 +0100] rev 1058
Merge with stable
Fri, 30 Mar 2012 22:08:46 +0100 record: allow splitting of hunks by manually editing patches stable
A. S. Budden <abudden@gmail.com> [Fri, 30 Mar 2012 22:08:46 +0100] rev 1057
record: allow splitting of hunks by manually editing patches It is possible that unrelated changes in a file are on sequential lines. The current record extension does not allow these to be committed independently. An example use case for this is in software development for deeply embedded real-time systems. In these environments, it is not always possible to use a debugger (due to time-constraints) and hence inline UART-based printing is often used. When fixing a bug in a module, it is often convenient to add a large number of 'printf's (linked to the UART via a custom fputc) to the module in order to work out what is going wrong. printf is a very slow function (and also variadic so somewhat frowned upon by the MISRA standard) and hence it is highly undesirable to commit these lines to the repository. If only a partial fix is implemented, however, it is desirable to commit the fix without deleting all of the printf lines. This is also simplifies removal of the printf lines as once the final fix is committed, 'hg revert' does the rest. It is likely that the printf lines will be very near the actual fix, so being able to split the hunk is very useful in this case. There were two alternatives I considered for the user interface. One was to manually edit the patch, the other to allow a hunk to be split into individual lines for consideration. The latter option would require a significant refactor of the record module and is less flexible. While the former is potentially more complicated to use, this is a feature that is likely to only be used in certain exceptional cases (such as the use case proposed above) and hence I felt that the complexity would not be a considerable issue. I've also written a follow-up patch that refactors the 'prompt' code to base everything on the choices variable. This tidies up and clarifies the code a bit (removes constructs like 'if ret == 7' and removes the 'e' option from the file scope options as it's not relevant there. It's not really a necessity, so I've excluded it from this submission for now, but I can send it separately if there's a desire and it's on bitbucket (see below) in the meantime. Possible future improvements include: * Tidying up the 'prompt' code to base everything on the choices variable. This would allow entries to be removed from the prompt as currently 'e' is offered even for entire file patches, which is currently unsupported. * Allowing the entire file (or even multi-file) patch to be edited manually: this would require quite a large refactor without much benefit, so I decided to exclude it from the initial submission. * Allow the option to retry if a patch fails to apply (this is what Git does). This would require quite a bit of refactoring given the current 'hg record' implementation, so it's debatable whether it's worth it. Output is similar to existing record user interface except that an additional option ('e') exists to allow manual editing of the patch. This opens the user's configured editor with the patch. A comment is added to the bottom of the patch explaining what to do (based on Git's one). A large proportion of the changeset is test-case changes to update the options reported by record (Ynesfdaq? instead of Ynsfdaq?). Functional changes are in record.py and there are some new test cases in test-record.t. [ original upstream message ]
Sat, 31 Mar 2012 10:44:31 -0500 tests: make hghave handle exec bit on Linux with vfat stable
Matt Mackall <mpm@selenic.com> [Sat, 31 Mar 2012 10:44:31 -0500] rev 1056
tests: make hghave handle exec bit on Linux with vfat [ original upstream message ]
Sat, 31 Mar 2012 10:44:31 -0500 tests: teach hghave to actually test for symlink support stable
Matt Mackall <mpm@selenic.com> [Sat, 31 Mar 2012 10:44:31 -0500] rev 1055
tests: teach hghave to actually test for symlink support [ original upstream message ]
Sat, 31 Mar 2012 17:14:32 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sat, 31 Mar 2012 17:14:32 +0100] rev 1054
Merge with stable
Sat, 11 Sep 2010 10:57:35 +0200 tests: fix incompatibility with python-2.4 in test-hgweb stable
Dirkjan Ochtman <dirkjan@ochtman.nl> [Sat, 11 Sep 2010 10:57:35 +0200] rev 1053
tests: fix incompatibility with python-2.4 in test-hgweb Thanks to lcantey for catching it. [ original upstream message ]
Wed, 08 Sep 2010 15:11:35 +0200 tests: extend get-with-headers to support cache testing stable
Dirkjan Ochtman <dirkjan@ochtman.nl> [Wed, 08 Sep 2010 15:11:35 +0200] rev 1052
tests: extend get-with-headers to support cache testing [ original upstream message ]
Wed, 14 Apr 2010 17:58:10 +0900 pylint, pyflakes: remove unused or duplicate imports stable
Nicolas Dumazet <nicdumz.commits@gmail.com> [Wed, 14 Apr 2010 17:58:10 +0900] rev 1051
pylint, pyflakes: remove unused or duplicate imports [ original upstream message ]
Sat, 11 Feb 2012 14:18:19 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sat, 11 Feb 2012 14:18:19 +0000] rev 1050
Merge with stable
Tue, 07 Feb 2012 18:47:16 +0100 mq: restore _branchtags() fast path (issue3223) stable
Patrick Mezard <patrick@mezard.eu> [Tue, 07 Feb 2012 18:47:16 +0100] rev 1049
mq: restore _branchtags() fast path (issue3223) Since a5917346c72e, mq saves the nodeid of the first applied patch to cache/branchheads, which breaks the optimized cache handling introduced in fbf8320f25c8. The problem is the revision being committed is appended to mqrepo.applied after the commit succeeds, which means mqrepo._branchtags() performs a regular update and write the first applied patch to the branch cache. One solution is to set a context variable _committingpatch on the mqrepo while it is committing a patch and to take it in account when deciding to fast-path mqrepo._branchtags(). Not really elegant but it works. The changes to test-mq-caches.t reverse changes introduced by a5917346c72e. The cache should not have been updated with mq records. The changes to test-keyword.t are indirectly caused by a5917346c72e. Reported and analyzed by Yuya Nishihara <yuya@tcha.org> Notes: - qpush still makes a slow path _branchtags() call when checking heads. Maybe this can be optimized. - be careful when merging this patch in default as secretcommit() was renamed newcommit() right after the end of the code freeze. [ original upstream message ]
Wed, 08 Feb 2012 16:56:00 +0000 tests: tighten checks for octal escapes in shell printf. stable
Jim Hague <jim.hague@acm.org> [Wed, 08 Feb 2012 16:56:00 +0000] rev 1048
tests: tighten checks for octal escapes in shell printf. printf on AIX default shell ksh (89) says \1 is an invalid escape. It insists on at least 2 digits. This causes failures in test-keyword.t and test-status.t. check-code.py already looks out for \NNN and recommends using Python for outputting octal values. Extend the check to \NN and \N and fix up resulting failures. [ original upstream message ]
Mon, 23 Jan 2012 16:21:12 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Mon, 23 Jan 2012 16:21:12 +0100] rev 1047
Merge with stable
Sat, 14 Jan 2012 01:56:27 +0100 run-tests: expand user in --with-hg stable
Mads Kiilerich <mads@kiilerich.com> [Sat, 14 Jan 2012 01:56:27 +0100] rev 1046
run-tests: expand user in --with-hg This makes it possible to run: $ ./run-tests.py --with-hg=~/hg-bin/hg [ original upstream message ]
Fri, 20 Jan 2012 01:24:16 +0100 tests: let run-tests.py default to use 'sh' in $PATH instead of '/bin/sh' stable
Mads Kiilerich <mads@kiilerich.com> [Fri, 20 Jan 2012 01:24:16 +0100] rev 1045
tests: let run-tests.py default to use 'sh' in $PATH instead of '/bin/sh' This makes it easier to run tests on systems that have a usable sh in the search path but not in the standard location. [ original upstream message ]
Sat, 14 Jan 2012 01:55:50 +0100 tests: add 'set -x' to the .t sh scripts in run-tests.py debug mode stable
Mads Kiilerich <mads@kiilerich.com> [Sat, 14 Jan 2012 01:55:50 +0100] rev 1044
tests: add 'set -x' to the .t sh scripts in run-tests.py debug mode This makes -d output much more readable when debugging the test framework or very strange test failures. [ original upstream message ]
Thu, 19 Jan 2012 02:01:05 +0100 Merge with default stable
Christian Ebert <blacktrash@gmx.net> [Thu, 19 Jan 2012 02:01:05 +0100] rev 1043
Merge with default
Sun, 15 Jan 2012 13:37:33 +0100 Update filectx.cmp monkeypatch to handle '\1\n' at start of file
Christian Ebert <blacktrash@gmx.net> [Sun, 15 Jan 2012 13:37:33 +0100] rev 1042
Update filectx.cmp monkeypatch to handle '\1\n' at start of file Analogous to 012b285cf643 in mercurial main.
Wed, 18 Jan 2012 16:46:15 +0100 phases: use nodemap to check for missing nodes stable
Sune Foldager <cryo@cyanite.org> [Wed, 18 Jan 2012 16:46:15 +0100] rev 1041
phases: use nodemap to check for missing nodes [ original upstream message ]
Thu, 19 Jan 2012 01:50:48 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Thu, 19 Jan 2012 01:50:48 +0100] rev 1040
Merge with stable
Wed, 11 Jan 2012 15:38:31 +0100 tests: add htmlcov option stable
Markus Zapke-Gr?ndemann <info@keimlink.de> [Wed, 11 Jan 2012 15:38:31 +0100] rev 1039
tests: add htmlcov option [ original upstream message ]
Thu, 12 Jan 2012 14:39:02 -0600 run-tests: use a list comprehension instead of map stable
Matt Mackall <mpm@selenic.com> [Thu, 12 Jan 2012 14:39:02 -0600] rev 1038
run-tests: use a list comprehension instead of map [ original upstream message ]
Wed, 11 Jan 2012 15:37:25 +0100 tests: fix omit path list stable
Markus Zapke-Gr?ndemann <info@keimlink.de> [Wed, 11 Jan 2012 15:37:25 +0100] rev 1037
tests: fix omit path list All directories need a trailing asterisk. Otherwise the files are not excluded from coverage. [ original upstream message ]
Fri, 09 Dec 2011 00:10:00 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Fri, 09 Dec 2011 00:10:00 +0100] rev 1036
Merge with stable
Thu, 08 Dec 2011 14:32:44 -0600 branch: warn on branching stable
Matt Mackall <mpm@selenic.com> [Thu, 08 Dec 2011 14:32:44 -0600] rev 1035
branch: warn on branching [ orginal upstream message ]
Thu, 24 Nov 2011 06:43:43 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Thu, 24 Nov 2011 06:43:43 +0000] rev 1034
Merge with stable
Mon, 21 Nov 2011 01:49:20 +0100 tests: use an alias to make msys 'pwd' return paths with forward slashes stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 21 Nov 2011 01:49:20 +0100] rev 1033
tests: use an alias to make msys 'pwd' return paths with forward slashes [ original upstream message ]
Mon, 21 Nov 2011 01:49:20 +0100 tests: skip cvs tests with msys on windows stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 21 Nov 2011 01:49:20 +0100] rev 1032
tests: skip cvs tests with msys on windows They will fail with weird 'ssh' errors. [ original upstream message ]
Mon, 21 Nov 2011 01:49:20 +0100 tests: introduce 'hghave msys' to skip tests that would fail because of msys stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 21 Nov 2011 01:49:20 +0100] rev 1031
tests: introduce 'hghave msys' to skip tests that would fail because of msys [ original upstream message ]
Thu, 24 Nov 2011 06:42:48 +0000 Merge with default stable
Christian Ebert <blacktrash@gmx.net> [Thu, 24 Nov 2011 06:42:48 +0000] rev 1030
Merge with default
Wed, 23 Nov 2011 01:20:32 +0000 test-keyword: use inline doctest syntax
Christian Ebert <blacktrash@gmx.net> [Wed, 23 Nov 2011 01:20:32 +0000] rev 1029
test-keyword: use inline doctest syntax
Mon, 21 Nov 2011 11:52:11 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Mon, 21 Nov 2011 11:52:11 +0000] rev 1028
Merge with stable
Mon, 21 Nov 2011 00:39:32 +0100 tests: skip color test on platforms without tic stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 21 Nov 2011 00:39:32 +0100] rev 1027
tests: skip color test on platforms without tic [ original upstream message ]
Mon, 21 Nov 2011 11:51:46 +0000 Merge with default stable
Christian Ebert <blacktrash@gmx.net> [Mon, 21 Nov 2011 11:51:46 +0000] rev 1026
Merge with default Make tests/hgave executable on stable branch too.
Fri, 18 Nov 2011 11:06:59 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Fri, 18 Nov 2011 11:06:59 +0000] rev 1025
Merge with stable
Wed, 16 Nov 2011 18:04:19 -0600 merge: give a special message for internal:merge failure (issue3105) stable
Matt Mackall <mpm@selenic.com> [Wed, 16 Nov 2011 18:04:19 -0600] rev 1024
merge: give a special message for internal:merge failure (issue3105) [ original upstream message ]
Wed, 16 Nov 2011 12:55:59 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Wed, 16 Nov 2011 12:55:59 +0000] rev 1023
Merge with stable
Wed, 16 Nov 2011 03:45:14 +0100 tests: use the specified shell for running old fashioned sh tests stable
Mads Kiilerich <mads@kiilerich.com> [Wed, 16 Nov 2011 03:45:14 +0100] rev 1022
tests: use the specified shell for running old fashioned sh tests [ original upstream message ]
Fri, 11 Nov 2011 09:39:33 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Fri, 11 Nov 2011 09:39:33 +0000] rev 1021
Merge with stable
Fri, 11 Nov 2011 09:38:45 +0000 Make hghave executable
Christian Ebert <blacktrash@gmx.net> [Fri, 11 Nov 2011 09:38:45 +0000] rev 1020
Make hghave executable
Mon, 07 Nov 2011 03:25:10 +0100 run-tests: make $TESTTMP matching case-insensitive on windows stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 07 Nov 2011 03:25:10 +0100] rev 1019
run-tests: make $TESTTMP matching case-insensitive on windows [ original upstream message ]
Mon, 07 Nov 2011 03:25:10 +0100 run-tests: don't quote command names - that do apparently not work with msys stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 07 Nov 2011 03:25:10 +0100] rev 1018
run-tests: don't quote command names - that do apparently not work with msys [ original upstream message ]
Mon, 07 Nov 2011 03:25:10 +0100 tests: ignore \r on windows stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 07 Nov 2011 03:25:10 +0100] rev 1017
tests: ignore \r on windows [ original upstream message ]
Mon, 07 Nov 2011 03:25:10 +0100 run-tests: convert windows paths to unix stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 07 Nov 2011 03:25:10 +0100] rev 1016
run-tests: convert windows paths to unix [ original upstream message ]
Mon, 07 Nov 2011 03:25:10 +0100 tests: make (glob) on windows accept \ instead of / stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 07 Nov 2011 03:25:10 +0100] rev 1015
tests: make (glob) on windows accept \ instead of / Globbing is usually used for filenames, so on windows it is reasonable and very convenient that glob patterns accepts '\' or '/' when the pattern specifies '/'. [ original upstream message ]
Mon, 07 Nov 2011 03:24:53 +0100 tests: use 'hghave serve' to guard tests that requires serve daemon management stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 07 Nov 2011 03:24:53 +0100] rev 1014
tests: use 'hghave serve' to guard tests that requires serve daemon management [ original upstream message ]
Mon, 07 Nov 2011 03:14:55 +0100 tests: use 'hghave system-sh' to guard tests that requires sh in system() stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 07 Nov 2011 03:14:55 +0100] rev 1013
tests: use 'hghave system-sh' to guard tests that requires sh in system() [ original upstream message ]
Mon, 07 Nov 2011 03:14:55 +0100 tests: use 'hghave no-windows' to avoid testing reserved file names on windows stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 07 Nov 2011 03:14:55 +0100] rev 1012
tests: use 'hghave no-windows' to avoid testing reserved file names on windows [ original upstream message ]
Mon, 07 Nov 2011 03:14:55 +0100 tests: use 'hghave unix-permissions' for tests that really use chmod stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 07 Nov 2011 03:14:55 +0100] rev 1011
tests: use 'hghave unix-permissions' for tests that really use chmod chmod of helper scripts is not included. tests that exercise the x bit in the file system uses 'hghave execbit'. [ original upstream message ]
Mon, 07 Nov 2011 03:14:54 +0100 tests: use 'hghave symlink' for tests using symlinks stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 07 Nov 2011 03:14:54 +0100] rev 1010
tests: use 'hghave symlink' for tests using symlinks [ original upstream message ]
Mon, 07 Nov 2011 02:44:04 +0100 tests: make '(esc)' matching in run-tests.py work as intended stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 07 Nov 2011 02:44:04 +0100] rev 1009
tests: make '(esc)' matching in run-tests.py work as intended The code for match on (esc) lines didn't work, and it would thus always end up emitting another suggestion ... which however would match the old one. [ original upstream message ]
Wed, 09 Nov 2011 13:45:20 +0000 Merge with default stable
Christian Ebert <blacktrash@gmx.net> [Wed, 09 Nov 2011 13:45:20 +0000] rev 1008
Merge with default
Wed, 09 Nov 2011 13:44:57 +0000 Add hghave test as of 5635a4017061
Christian Ebert <blacktrash@gmx.net> [Wed, 09 Nov 2011 13:44:57 +0000] rev 1007
Add hghave test as of 5635a4017061
Tue, 08 Nov 2011 18:13:53 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Tue, 08 Nov 2011 18:13:53 +0000] rev 1006
Merge with stable
Mon, 07 Nov 2011 13:46:41 -0600 run-tests: replace inline python handling with more native scheme stable
Matt Mackall <mpm@selenic.com> [Mon, 07 Nov 2011 13:46:41 -0600] rev 1005
run-tests: replace inline python handling with more native scheme Normally changes in tests are reported like this in diffs: $ cat foo - a + b Using -i mode lets us update tests when the new results are correct and/or populate tests with their output. But with the standard doctest framework, inline Python sections in tests changes instead result in a big failure report that's unhelpful. So here, we replace the doctest calls with a simple compile/eval loop. [ original upstream message ]
Mon, 07 Nov 2011 13:52:03 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Mon, 07 Nov 2011 13:52:03 +0000] rev 1004
Merge with stable
Thu, 03 Nov 2011 15:18:10 -0500 run-tests: minor cleanups stable
Matt Mackall <mpm@selenic.com> [Thu, 03 Nov 2011 15:18:10 -0500] rev 1003
run-tests: minor cleanups [ original upstream message ]
Thu, 03 Nov 2011 15:08:45 -0500 run-tests: pull out line matching function stable
Matt Mackall <mpm@selenic.com> [Thu, 03 Nov 2011 15:08:45 -0500] rev 1002
run-tests: pull out line matching function [ original upstream message ]
Thu, 03 Nov 2011 14:51:04 -0500 run-tests: pull out unified matching funcs stable
Matt Mackall <mpm@selenic.com> [Thu, 03 Nov 2011 14:51:04 -0500] rev 1001
run-tests: pull out unified matching funcs [ original upstream message ]
Thu, 03 Nov 2011 14:48:56 -0500 tests: add some comments to the unified test code stable
Matt Mackall <mpm@selenic.com> [Thu, 03 Nov 2011 14:48:56 -0500] rev 1000
tests: add some comments to the unified test code [ original upstream message ]
Thu, 03 Nov 2011 14:30:00 -0500 tests: rewrite inline Python support stable
Matt Mackall <mpm@selenic.com> [Thu, 03 Nov 2011 14:30:00 -0500] rev 999
tests: rewrite inline Python support Tests with inline Python could turn '>>>' into their underlying python invocation if the test got updated with -i. [ original upstream message ]
Mon, 07 Nov 2011 13:48:11 +0000 Backout b78cce2b1430 until a proper solution is found stable
Christian Ebert <blacktrash@gmx.net> [Mon, 07 Nov 2011 13:48:11 +0000] rev 998
Backout b78cce2b1430 until a proper solution is found
Mon, 24 Oct 2011 17:02:10 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Mon, 24 Oct 2011 17:02:10 +0100] rev 997
Merge with stable
Sat, 22 Oct 2011 23:21:38 +0200 run-tests: make sure no_proxy/NO_PROXY are empty to fix test-http-proxy.t stable
Thomas Arendsen Hein <thomas@intevation.de> [Sat, 22 Oct 2011 23:21:38 +0200] rev 996
run-tests: make sure no_proxy/NO_PROXY are empty to fix test-http-proxy.t If no_proxy (or NO_PROXY) includes localhost, the test for detecting an unreachable proxy fails, because the proxy setting is ignored. [ original upstream message ]
Mon, 24 Oct 2011 13:54:59 +0200 keyword: use util.realpath instead of os.path.realpath stable
Thomas Arendsen Hein <thomas@intevation.de> [Mon, 24 Oct 2011 13:54:59 +0200] rev 995
keyword: use util.realpath instead of os.path.realpath This makes test-keyword.t pass on Python 2.4.1 (e.g. Debian sarge) [ original upstream message ]
Sat, 22 Oct 2011 15:45:19 +0100 Merge with default stable
Christian Ebert <blacktrash@gmx.net> [Sat, 22 Oct 2011 15:45:19 +0100] rev 994
Merge with default
Fri, 21 Oct 2011 12:07:27 +0100 Correct grammar in iskwfile docstring
Christian Ebert <blacktrash@gmx.net> [Fri, 21 Oct 2011 12:07:27 +0100] rev 993
Correct grammar in iskwfile docstring
Sat, 22 Oct 2011 15:43:48 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sat, 22 Oct 2011 15:43:48 +0100] rev 992
Merge with stable
Fri, 30 Sep 2011 21:58:54 -0400 rollback: avoid unsafe rollback when not at tip (issue2998) stable
Greg Ward <greg@gerg.ca> [Fri, 30 Sep 2011 21:58:54 -0400] rev 991
rollback: avoid unsafe rollback when not at tip (issue2998) You can get into trouble if you commit, update back to an older changeset, and then rollback. The update removes your valuable changes from the working dir, then rollback removes them history. Oops: you've just irretrievably lost data running nothing but core Mercurial commands. (More subtly: rollback from a shared clone that was already at an older changeset -- no update required, just rollback from the wrong directory.) The fix assumes that only "commit" transactions have irreplaceable data, and allows rolling back non-commit transactions as always. But when rolling back a commit, check that the working dir is checked out to tip, i.e. the changeset we're about to destroy. If not, abort. You can get back the old (dangerous) behaviour with --force. [ original upstream message ]
Sun, 16 Oct 2011 15:32:04 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sun, 16 Oct 2011 15:32:04 +0100] rev 990
Merge with stable
Thu, 13 Oct 2011 17:54:37 +0200 run-tests: end doctest block when seeing a non-command stable
Idan Kamara <idankk86@gmail.com> [Thu, 13 Oct 2011 17:54:37 +0200] rev 989
run-tests: end doctest block when seeing a non-command [ original upstream message ]
Thu, 13 Oct 2011 17:48:29 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Thu, 13 Oct 2011 17:48:29 +0100] rev 988
Merge with stable
Wed, 12 Oct 2011 22:01:14 +0200 tests: add support for inline doctests in test files stable
Idan Kamara <idankk86@gmail.com> [Wed, 12 Oct 2011 22:01:14 +0200] rev 987
tests: add support for inline doctests in test files This adds doctest like syntax to .t files, that can be interleaved with regular shell code: $ echo -n a > file >>> print open('file').read() a >>> open('file', 'a').write('b') $ cat file ab The syntax is exactly the same as regular doctests, so multiline statements look like this: >>> for i in range(3): ... print i 0 1 2 Each block has its own context, i.e.: >>> x = 0 >>> print x 0 $ echo 'foo' foo >>> print x will result in a NameError. Errors are displayed in standard doctest format: >>> print 'foo' bar --- /home/idan/dev/hg/default/tests/test-test.t +++ /home/idan/dev/hg/default/tests/test-test.t.err @@ -2,3 +2,16 @@ > >>> print 'foo' > bar > EOF + ********************************************************************** + File "/tmp/tmps8X_0ohg-tst", line 1, in tmps8X_0ohg-tst + Failed example: + print 'foo' + Expected: + bar + Got: + foo + ********************************************************************** + 1 items had failures: + 1 of 1 in tmps8X_0ohg-tst + ***Test Failed*** 1 failures. + [1] As for the implementation, it's quite simple: when the test runner sees a line starting with '>>>' it converts it, and all subsequent lines until the next line that begins with '$' to a 'python -m heredoctest <<EOF' call with the proper heredoc to follow. So if we have this test file: >>> for c in 'abcd': ... print c a b c d $ echo foo foo It gets converted to: $ python -m heredoctest <<EOF > >>> for c in 'abcd': > ... print c > a > b > c > d > EOF $ echo foo foo And then processed like every other test file by converting it to a sh script. [ original upstream message ]
Sat, 08 Oct 2011 00:24:35 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sat, 08 Oct 2011 00:24:35 +0100] rev 986
Merge with stable
Sun, 02 Oct 2011 14:34:28 -0400 import: wrap a transaction around the whole command stable
Greg Ward <greg@gerg.ca> [Sun, 02 Oct 2011 14:34:28 -0400] rev 985
import: wrap a transaction around the whole command Now 'rollback' after 'import' is less surprising: it rolls back all of the imported changesets, not just the last one. As an extra added benefit, you don't need 'rollback -f' after 'import --bypass', which was an undesired side effect of fixing issue2998 (59e8bc22506e).. Note that this is a different take on issue963, which complained that rollback after importing multiple patches returned the working dir parent to the starting point, not to the second-last patch applied. Since we now rollback the entire import, returning the working dir to the starting point is entirely logical. So this change also undoes a732eebf1958, the fix to issue963, and updates its tests accordingly. Bottom line: rollback after import was weird before issue963, understandable since the fix for issue963, and even better now. [ original upstream message ]
Wed, 14 Sep 2011 16:19:33 +0100 (0.9.2compat) merge with default 0.9.2compat
Christian Ebert <blacktrash@gmx.net> [Wed, 14 Sep 2011 16:19:33 +0100] rev 984
(0.9.2compat) merge with default Adapt preserving filemode. Fix a typo. Clean up last merge.
Wed, 14 Sep 2011 15:34:32 +0100 Merge with default stable
Christian Ebert <blacktrash@gmx.net> [Wed, 14 Sep 2011 15:34:32 +0100] rev 983
Merge with default
Sat, 10 Sep 2011 13:23:41 +0100 Make status test after record and kwexpand/kwshrink reliable
Christian Ebert <blacktrash@gmx.net> [Sat, 10 Sep 2011 13:23:41 +0100] rev 982
Make status test after record and kwexpand/kwshrink reliable This guarantees test failure when the dirstate code is omitted at the end of the kwtemplater.overwrite method. kwexpand/kwshrink: Without a 1 second wait the test succeeds sometimes, even when the dirstate of the overwritten file is not forced to normal. record: status after recording an added file allows to check whether normallookup is needed after overwriting.
Wed, 14 Sep 2011 15:30:21 +0100 Preserve file mode when overwriting
Christian Ebert <blacktrash@gmx.net> [Wed, 14 Sep 2011 15:30:21 +0100] rev 981
Preserve file mode when overwriting
Tue, 09 Aug 2011 12:56:43 +0200 Merge with default stable
Christian Ebert <blacktrash@gmx.net> [Tue, 09 Aug 2011 12:56:43 +0200] rev 980
Merge with default
Tue, 09 Aug 2011 12:54:11 +0200 Avoid x = a and b or c
Christian Ebert <blacktrash@gmx.net> [Tue, 09 Aug 2011 12:54:11 +0200] rev 979
Avoid x = a and b or c
Mon, 08 Aug 2011 09:38:40 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Mon, 08 Aug 2011 09:38:40 +0100] rev 978
Merge with stable
Mon, 25 Jul 2011 16:37:18 -0500 tests: use getattr instead of hasattr stable
Augie Fackler <durin42@gmail.com> [Mon, 25 Jul 2011 16:37:18 -0500] rev 977
tests: use getattr instead of hasattr [ original upstream message ]
Thu, 14 Jul 2011 08:39:48 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Thu, 14 Jul 2011 08:39:48 +0100] rev 976
Merge with stable
Wed, 13 Jul 2011 19:23:08 +0200 run-tests: fix summary when accepting changes interactively stable
Patrick Mezard <pmezard@gmail.com> [Wed, 13 Jul 2011 19:23:08 +0200] rev 975
run-tests: fix summary when accepting changes interactively Accepted changes were not counted as success. [ original upstream message ]
Thu, 07 Jul 2011 12:54:12 +0100 Merge with default stable
Christian Ebert <blacktrash@gmx.net> [Thu, 07 Jul 2011 12:54:12 +0100] rev 974
Merge with default
Sun, 03 Jul 2011 12:58:03 +0200 Reuse already present working contexts for match
Christian Ebert <blacktrash@gmx.net> [Sun, 03 Jul 2011 12:58:03 +0200] rev 973
Reuse already present working contexts for match Shortens overlong line as side-effect.
Fri, 01 Jul 2011 14:52:14 +0200 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Fri, 01 Jul 2011 14:52:14 +0200] rev 972
Merge with stable
Thu, 30 Jun 2011 16:36:38 +0200 run-test: revert most of 439ed4721a6d, timeout uses fallback for terminate() stable
Thomas Arendsen Hein <thomas@intevation.de> [Thu, 30 Jun 2011 16:36:38 +0200] rev 971
run-test: revert most of 439ed4721a6d, timeout uses fallback for terminate() [ original upstream message ]
Thu, 30 Jun 2011 16:25:05 +0200 run-tests: fallback to SIGTERM if subprocess.Popen does not have terminate() stable
Thomas Arendsen Hein <thomas@intevation.de> [Thu, 30 Jun 2011 16:25:05 +0200] rev 970
run-tests: fallback to SIGTERM if subprocess.Popen does not have terminate() [ original upstream message ]
Mon, 20 Jun 2011 12:02:52 +0200 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Mon, 20 Jun 2011 12:02:52 +0200] rev 969
Merge with stable
Sat, 18 Jun 2011 16:52:51 -0500 scmutil: switch match users to supplying contexts stable
Matt Mackall <mpm@selenic.com> [Sat, 18 Jun 2011 16:52:51 -0500] rev 968
scmutil: switch match users to supplying contexts The most appropriate context is not always clearly defined. The obvious cases: For working directory commands, we use None For commands (eg annotate) with single revs, we use that revision The less obvious cases: For commands (eg status, diff) with a pair of revs, we use the second revision For commands that take a range (like log), we use None [ original upstream message ]
Tue, 14 Jun 2011 20:35:21 +0200 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Tue, 14 Jun 2011 20:35:21 +0200] rev 967
Merge with stable
Sun, 12 Jun 2011 17:26:20 +0300 run-tests: verbose log ignored test stable
Idan Kamara <idankk86@gmail.com> [Sun, 12 Jun 2011 17:26:20 +0300] rev 966
run-tests: verbose log ignored test [ original upstream message ]
Sat, 11 Jun 2011 15:03:58 +0200 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sat, 11 Jun 2011 15:03:58 +0200] rev 965
Merge with stable
Sat, 11 Jun 2011 14:17:25 +0200 patch: generalize the use of patchmeta in applydiff() stable
Patrick Mezard <pmezard@gmail.com> [Sat, 11 Jun 2011 14:17:25 +0200] rev 964
patch: generalize the use of patchmeta in applydiff() - Add patchmeta.copy() and emit copies from iterhunks. Modifying patchmeta instances in applydiff() makes things simpler. - Rename selectfile() into makepatchmeta(). It is responsible for creating patchmeta for regular patches. - Pass patchmeta objects to patchfile() directly patchmeta instances were associated with git patches, for regular patches we had to pass additional variables to tell the patch intent to patchfile(). Instead, we generate patchmeta for regular patches and pass them. This will also help with patch filtering by matcher objects. [ original upstream message ]
Thu, 02 Jun 2011 00:12:10 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Thu, 02 Jun 2011 00:12:10 +0100] rev 963
Merge with stable
Tue, 31 May 2011 20:39:04 -0500 run-tests: allow whitelisting tests that should always run stable
Augie Fackler <durin42@gmail.com> [Tue, 31 May 2011 20:39:04 -0500] rev 962
run-tests: allow whitelisting tests that should always run It's desirable to run some tests all the time, for example test-check-pyflakes.t and test-check-code-hg.py. This allows passing --whitelist as a path to a file (flag can be specified more than once) which contains a list of files to whitelist. Whitelisted tests are run even if they're blacklisted or wouldn't match a --keyword test run. For example, to do a quick test of usehttp2, one can now do $ cat > test-whitelist <<EOF > test-check-pyflakes.t > test-check-code-hg.py > EOF $ (cd tests && ./run-tests.py --extra-config-opt 'ui.usehttp2=true' > -k http -j 8 --whitelist test-whitelist) and have all http-specific tests run as well as the two code linters. [ original upstream message ]
Sat, 28 May 2011 15:16:55 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sat, 28 May 2011 15:16:55 +0100] rev 961
Merge with stable
Sat, 28 May 2011 11:44:27 +0200 run-tests: fix --blacklist (broken by 95715c2f90bf) stable
Patrick Mezard <pmezard@gmail.com> [Sat, 28 May 2011 11:44:27 +0200] rev 960
run-tests: fix --blacklist (broken by 95715c2f90bf) [ original upstream message ]
Sat, 28 May 2011 03:19:16 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sat, 28 May 2011 03:19:16 +0100] rev 959
Merge with stable
Fri, 27 May 2011 21:50:10 +0200 patch: use temporary files to handle intermediate copies stable
Patrick Mezard <pmezard@gmail.com> [Fri, 27 May 2011 21:50:10 +0200] rev 958
patch: use temporary files to handle intermediate copies git patches may require copies to be handled out-of-order. For instance, take the following sequence: * modify a * copy a into b Here, we have to generate b from a before its modification. To do so, applydiff() was scanning for copy metadata and performing the copies before processing the other changes in-order. While smart and efficient, this approach complicates things by handling file copies and file creations at different places and times. While a new file must not exist before being patched a copied file already exists before applying the first hunk. Instead of copying the files at their final destination before patching, we store them in a temporary file location and retrieve them when patching. The filestore always stores file content in real files but nothing prevents adding a cache layer. The filestore class was kept separate from fsbackend for at least two reasons: - This class is likely to be reused as a temporary result store for a future repository patching call (entries just have to be extended to contain copy sources). - Delegating this role to backends might be more efficient in a repository backend case: the source files are already available in the repository itself and do not need to be copied again. It also means that third-parties backend would have to implement two other methods. If we ever decide to merge the filestore feature into backend, a minimalistic approach would be to compose with filestore directly. Keep in mind this copy overhead only applies for copy/rename sources, and may even be reduced to copy sources which have to handled ahead of time. [ original upstream message ]
Fri, 27 May 2011 21:50:09 +0200 patch: refactor file creation/removal detection stable
Patrick Mezard <pmezard@gmail.com> [Fri, 27 May 2011 21:50:09 +0200] rev 957
patch: refactor file creation/removal detection The patcher has to know if a file is being created or removed to check if the target already exists, or to actually unlink the file when a hunk emptying it is applied. This was done by embedding the creation/removal information in the first (and only) hunk attached to the file. There are two problems with this approach: - creation/removal is really a property of the file being patched and not its hunk. - for regular patches, file creation cannot be deduced at parsing time: there are case where the *stripped* file paths must be compared. Modifying hunks after their creation is clumsy and prevent further refactorings related to copies handling. Instead, we delegate this job to selectfile() which has all the relevant information, and remove the hunk createfile() and rmfile() methods. [ original upstream message ]
Fri, 27 May 2011 17:46:48 +0300 run-tests: fix --blacklist with jobs > 1 stable
Idan Kamara <idankk86@gmail.com> [Fri, 27 May 2011 17:46:48 +0300] rev 956
run-tests: fix --blacklist with jobs > 1 filter blacklisted tests before partitioning them to the children. maintains the 'Skipped...' output but not the 's'. [ original upstream message ]
Fri, 27 May 2011 17:46:47 +0300 run-tests: slightly simplify blacklist check stable
Idan Kamara <idankk86@gmail.com> [Fri, 27 May 2011 17:46:47 +0300] rev 955
run-tests: slightly simplify blacklist check [ original upstream message ]
Thu, 19 May 2011 00:51:06 +0200 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Thu, 19 May 2011 00:51:06 +0200] rev 954
Merge with stable
Wed, 18 May 2011 23:48:13 +0200 patch: set desired mode when patching, not in updatedir() stable
Patrick Mezard <pmezard@gmail.com> [Wed, 18 May 2011 23:48:13 +0200] rev 953
patch: set desired mode when patching, not in updatedir() This patch and the following aim at merging _updatedir() actions into _applydiff(). [ original upstream message ]
Wed, 18 May 2011 23:30:45 +0200 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Wed, 18 May 2011 23:30:45 +0200] rev 952
Merge with stable
Wed, 18 May 2011 15:45:57 +0200 run-tests: print a newline after all warnings stable
Thomas Arendsen Hein <thomas@intevation.de> [Wed, 18 May 2011 15:45:57 +0200] rev 951
run-tests: print a newline after all warnings [ original upstream message ]
Wed, 18 May 2011 00:44:15 +0200 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Wed, 18 May 2011 00:44:15 +0200] rev 950
Merge with stable
Tue, 17 May 2011 23:46:15 +0200 patch: extract fs access from patchfile into fsbackend stable
Patrick Mezard <pmezard@gmail.com> [Tue, 17 May 2011 23:46:15 +0200] rev 949
patch: extract fs access from patchfile into fsbackend Most filesystem calls are already isolated in patchfile but this is not enough: renames are performed before patchfile is available and some chmod calls are even done outside of the applydiff call. Once all these calls are extracted into a backend class, we can provide cleaner APIs to write to a working directory context directly into the repository. [ original upstream message ]
Tue, 17 May 2011 13:45:25 +0200 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Tue, 17 May 2011 13:45:25 +0200] rev 948
Merge with stable
Mon, 16 May 2011 21:56:26 +0200 run-tests: replace chdir() with Popen cwd option stable
Patrick Mezard <pmezard@gmail.com> [Mon, 16 May 2011 21:56:26 +0200] rev 947
run-tests: replace chdir() with Popen cwd option [ original upstream message ]
Mon, 16 May 2011 21:54:43 +0200 run-tests: make --debug run in the temporary test directory stable
Patrick Mezard <pmezard@gmail.com> [Mon, 16 May 2011 21:54:43 +0200] rev 946
run-tests: make --debug run in the temporary test directory [ original upstream message ]
Mon, 16 May 2011 21:52:28 +0200 run-tests: use the common test path on Windows and Java stable
Patrick Mezard <pmezard@gmail.com> [Mon, 16 May 2011 21:52:28 +0200] rev 945
run-tests: use the common test path on Windows and Java The alternate one did not run in the test directory and controlling the jobs execution with threads instead of process made it harder to fix. [ original upstream message ]
Mon, 16 May 2011 21:41:46 +0200 run-tests: ignore timeout when Popen.terminate is unavailable stable
Patrick Mezard <pmezard@gmail.com> [Mon, 16 May 2011 21:41:46 +0200] rev 944
run-tests: ignore timeout when Popen.terminate is unavailable Popen.terminate was introduced in python 2.6 [ original upstream message ]
Mon, 16 May 2011 21:26:50 +0200 run-tests: fix hg.bat python reference stable
Patrick Mezard <pmezard@gmail.com> [Mon, 16 May 2011 21:26:50 +0200] rev 943
run-tests: fix hg.bat python reference hg.bat expects to live in pythonxx/scripts and the python interpreter to be in pythonxx. run-tests.py file layout is a little different and python location must be fixed. [ original upstream message ]
Mon, 16 May 2011 21:24:14 +0200 run-tests: fix python executable detection and copy on Windows stable
Patrick Mezard <pmezard@gmail.com> [Mon, 16 May 2011 21:24:14 +0200] rev 942
run-tests: fix python executable detection and copy on Windows [ original upstream message ]
Sat, 14 May 2011 13:26:49 +0200 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sat, 14 May 2011 13:26:49 +0200] rev 941
Merge with stable
Fri, 13 May 2011 14:58:24 -0500 scmutil: drop aliases in cmdutil for match functions stable
Matt Mackall <mpm@selenic.com> [Fri, 13 May 2011 14:58:24 -0500] rev 940
scmutil: drop aliases in cmdutil for match functions [ original upstream message ]
Thu, 12 May 2011 19:45:46 +0200 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Thu, 12 May 2011 19:45:46 +0200] rev 939
Merge with stable
Thu, 12 May 2011 14:31:07 +0200 keyword: use cmdutil.command decorator stable
Martin Geisler <mg@aragost.com> [Thu, 12 May 2011 14:31:07 +0200] rev 938
keyword: use cmdutil.command decorator [ original upstream message ]
Tue, 10 May 2011 01:44:09 +0200 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Tue, 10 May 2011 01:44:09 +0200] rev 937
Merge with stable
Mon, 09 May 2011 17:20:15 +0200 run-tests: remove check on --shell argument stable
Martin Geisler <mg@aragost.com> [Mon, 09 May 2011 17:20:15 +0200] rev 936
run-tests: remove check on --shell argument No shell is needed when executing Python tests and finding a good shell might be difficult/impossible on some platforms (e.g., Windows). [ original upstream message ]
Sat, 07 May 2011 21:01:15 +0300 run-tests: take the basepath when constructing the test temp dir stable
Idan Kamara <idankk86@gmail.com> [Sat, 07 May 2011 21:01:15 +0300] rev 935
run-tests: take the basepath when constructing the test temp dir so it's possible to run tests that are outside the test/ dir [ original upstream message ]
Sat, 07 May 2011 20:56:43 +0300 run-tests: compare absolute paths in _checkhglib stable
Idan Kamara <idankk86@gmail.com> [Sat, 07 May 2011 20:56:43 +0300] rev 934
run-tests: compare absolute paths in _checkhglib [ original upstream message ]
Fri, 06 May 2011 20:13:10 +0200 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Fri, 06 May 2011 20:13:10 +0200] rev 933
Merge with stable
Thu, 05 May 2011 20:04:49 +0200 run-tests: add --shell command line flag stable
Martin Geisler <mg@lazybytes.net> [Thu, 05 May 2011 20:04:49 +0200] rev 932
run-tests: add --shell command line flag This makes it easy to test with, say, both /bin/bash and /bin/dash instead of changing the system-wide /bin/sh. [ original upstream message ]
Thu, 05 May 2011 20:03:43 +0200 run-tests: use type of default to convert environment variable stable
Martin Geisler <mg@lazybytes.net> [Thu, 05 May 2011 20:03:43 +0200] rev 931
run-tests: use type of default to convert environment variable Before, defaults could only be integers, they can now also be strings, floats and what have you. [ original upstream message ]
Wed, 04 May 2011 10:39:10 -0500 run-tests.py: correctly handle list options with parallel tasks stable
Augie Fackler <durin42@gmail.com> [Wed, 04 May 2011 10:39:10 -0500] rev 930
run-tests.py: correctly handle list options with parallel tasks [ original upstream message ]
Mon, 02 May 2011 10:11:18 +0200 prevent transient leaks of file handle by using new helper functions stable
Dan Villiom Podlaski Christiansen <danchr@gmail.com> [Mon, 02 May 2011 10:11:18 +0200] rev 929
prevent transient leaks of file handle by using new helper functions These leaks may occur in environments that don't employ a reference counting GC, i.e. PyPy. This implies: - changing opener(...).read() calls to opener.read(...) - changing opener(...).write() calls to opener.write(...) - changing open(...).read(...) to util.readfile(...) - changing open(...).write(...) to util.writefile(...) [ original upstream description ]
Mon, 02 May 2011 19:20:29 +0200 localrepo: reuse parent manifest in commitctx if no files have changed stable
Peter Arrenbrecht <peter.arrenbrecht@gmail.com> [Mon, 02 May 2011 19:20:29 +0200] rev 928
localrepo: reuse parent manifest in commitctx if no files have changed This speeds up the in-memory version of debugbuilddag that I'm working on considerably for the case where we want to build just a 00changelog.i (for discovery tests, for instance). There are a couple of test changes because node ids in tests have changed. The changes to the patch names in test-mq-qdelete.t were required because they could collide with nodeid abbreviations and newly actually do (patch "c" collides with id "cafe..." for patch "b"). [ original upstream description ]
Sun, 01 May 2011 18:18:31 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sun, 01 May 2011 18:18:31 +0100] rev 927
Merge with stable
Sun, 01 May 2011 08:00:25 -0500 run-tests: add flag to provide extra hgrc options for test runs stable
Augie Fackler <durin42@gmail.com> [Sun, 01 May 2011 08:00:25 -0500] rev 926
run-tests: add flag to provide extra hgrc options for test runs [ original upstream message ]
Sat, 30 Apr 2011 17:38:06 +0200 tests: move test bundles in a bundles/ subdirectory stable
Nicolas Dumazet <nicdumz.commits@gmail.com> [Sat, 30 Apr 2011 17:38:06 +0200] rev 925
tests: move test bundles in a bundles/ subdirectory [ original upstream message ]
Sun, 01 May 2011 10:37:57 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sun, 01 May 2011 10:37:57 +0100] rev 924
Merge with stable
Sat, 30 Apr 2011 15:20:27 +0300 run-tests: print a new line before writing the diff stable
Idan Kamara <idankk86@gmail.com> [Sat, 30 Apr 2011 15:20:27 +0300] rev 923
run-tests: print a new line before writing the diff [ original upstream message ]
Sat, 30 Apr 2011 11:41:20 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sat, 30 Apr 2011 11:41:20 +0100] rev 922
Merge with stable
Fri, 29 Apr 2011 20:29:22 +0300 run-tests: don't count test as succeeded if it failed stable
Idan Kamara <idankk86@gmail.com> [Fri, 29 Apr 2011 20:29:22 +0300] rev 921
run-tests: don't count test as succeeded if it failed regressed around ec4ae5727f07 [ original upstream message ]
Sat, 30 Apr 2011 01:25:43 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sat, 30 Apr 2011 01:25:43 +0100] rev 920
Merge with stable
Mon, 25 Apr 2011 17:01:34 -0500 run-tests: do chdir for tests under a lock for thread safety stable
Matt Mackall <mpm@selenic.com> [Mon, 25 Apr 2011 17:01:34 -0500] rev 919
run-tests: do chdir for tests under a lock for thread safety [ original upstream message ]
Mon, 25 Apr 2011 16:17:08 -0500 run-tests: add iolock to vlog stable
Matt Mackall <mpm@selenic.com> [Mon, 25 Apr 2011 16:17:08 -0500] rev 918
run-tests: add iolock to vlog [ original upstream message ]
Mon, 25 Apr 2011 23:09:47 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Mon, 25 Apr 2011 23:09:47 +0100] rev 917
Merge with stable
Mon, 25 Apr 2011 18:42:31 +0200 run-tests: display diff before prompting with --interactive stable
Patrick Mezard <pmezard@gmail.com> [Mon, 25 Apr 2011 18:42:31 +0200] rev 916
run-tests: display diff before prompting with --interactive [ original upstream message ]
Sun, 24 Apr 2011 17:52:46 -0500 run-tests: fix some missing i/o locks stable
Matt Mackall <mpm@selenic.com> [Sun, 24 Apr 2011 17:52:46 -0500] rev 915
run-tests: fix some missing i/o locks [ original upstream message ]
Sun, 24 Apr 2011 16:46:37 -0500 run-tests: add a lock for console I/O stable
Matt Mackall <mpm@selenic.com> [Sun, 24 Apr 2011 16:46:37 -0500] rev 914
run-tests: add a lock for console I/O [ original upstream message ]
Sun, 24 Apr 2011 16:42:15 -0500 run-tests: switch timeout handling from alarm to helper thread stable
Matt Mackall <mpm@selenic.com> [Sun, 24 Apr 2011 16:42:15 -0500] rev 913
run-tests: switch timeout handling from alarm to helper thread This should be slightly more portable than signals and be compatible with threaded dispatch. [ original upstream message ]
Sun, 24 Apr 2011 16:42:11 -0500 run-tests: add locking on results struct stable
Matt Mackall <mpm@selenic.com> [Sun, 24 Apr 2011 16:42:11 -0500] rev 912
run-tests: add locking on results struct [ original upstream message ]
Mon, 25 Apr 2011 01:42:21 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Mon, 25 Apr 2011 01:42:21 +0100] rev 911
Merge with stable
Sun, 24 Apr 2011 23:33:48 +0200 run-tests: fix --interactive (after 994ad067ac6e) stable
Patrick Mezard <pmezard@gmail.com> [Sun, 24 Apr 2011 23:33:48 +0200] rev 910
run-tests: fix --interactive (after 994ad067ac6e) - Do not prompt if there is no .err file - Fix source and target paths [ original upstream message ]
Fri, 22 Apr 2011 14:04:34 -0500 run-tests: move test loop into a helper function stable
Matt Mackall <mpm@selenic.com> [Fri, 22 Apr 2011 14:04:34 -0500] rev 909
run-tests: move test loop into a helper function [ original upstream message ]
Fri, 22 Apr 2011 12:24:22 -0500 run-tests: use a results dict stable
Matt Mackall <mpm@selenic.com> [Fri, 22 Apr 2011 12:24:22 -0500] rev 908
run-tests: use a results dict [ original upstream message ]
Fri, 22 Apr 2011 11:36:40 -0500 run-tests: move blacklist and retest filtering to runone stable
Matt Mackall <mpm@selenic.com> [Fri, 22 Apr 2011 11:36:40 -0500] rev 907
run-tests: move blacklist and retest filtering to runone [ original upstream message ]
Fri, 22 Apr 2011 11:32:05 -0500 run-tests: keep a list of passed tests stable
Matt Mackall <mpm@selenic.com> [Fri, 22 Apr 2011 11:32:05 -0500] rev 906
run-tests: keep a list of passed tests [ original upstream message ]
Fri, 22 Apr 2011 11:24:27 -0500 run-tests: move keyword checking into runone stable
Matt Mackall <mpm@selenic.com> [Fri, 22 Apr 2011 11:24:27 -0500] rev 905
run-tests: move keyword checking into runone [ original upstream message ]
Fri, 22 Apr 2011 11:22:02 -0500 run-tests: add ignores list stable
Matt Mackall <mpm@selenic.com> [Fri, 22 Apr 2011 11:22:02 -0500] rev 904
run-tests: add ignores list [ original upstream message ]
Thu, 21 Apr 2011 18:38:30 -0500 run-tests: move existence/name format check into runone stable
Matt Mackall <mpm@selenic.com> [Thu, 21 Apr 2011 18:38:30 -0500] rev 903
run-tests: move existence/name format check into runone [ original upstream message ]
Thu, 21 Apr 2011 18:19:45 -0500 run-tests: move interactive handling into runone stable
Matt Mackall <mpm@selenic.com> [Thu, 21 Apr 2011 18:19:45 -0500] rev 902
run-tests: move interactive handling into runone [ original upstream message ]
Wed, 20 Apr 2011 21:41:41 +0200 move canonpath from util to scmutil stable
Adrian Buehlmann <adrian@cadifra.com> [Wed, 20 Apr 2011 21:41:41 +0200] rev 901
move canonpath from util to scmutil [ original upstream message ]
Sun, 10 Apr 2011 20:51:39 +0200 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sun, 10 Apr 2011 20:51:39 +0200] rev 900
Merge with stable
Sat, 09 Apr 2011 15:52:19 -0500 tests: better output on timeouts stable
Matt Mackall <mpm@selenic.com> [Sat, 09 Apr 2011 15:52:19 -0500] rev 899
tests: better output on timeouts Formerly, timeouts would generate huge scrollback-destroying diffs and weird -15 return codes in the summary. Now we simply report "timed out". [ original upstream message ]
Tue, 05 Apr 2011 16:35:41 +0200 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Tue, 05 Apr 2011 16:35:41 +0200] rev 898
Merge with stable
Tue, 05 Apr 2011 11:07:25 +0200 keyword: convert a verbatim block to a field list stable
Martin Geisler <mg@aragost.com> [Tue, 05 Apr 2011 11:07:25 +0200] rev 897
keyword: convert a verbatim block to a field list [ orginal upstream message ]
Sun, 27 Mar 2011 13:15:35 +0200 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sun, 27 Mar 2011 13:15:35 +0200] rev 896
Merge with stable
Fri, 25 Mar 2011 22:15:37 +0200 tests: set HOME to the test temp dir (issue2707) stable
Idan Kamara <idankk86@gmail.com> [Fri, 25 Mar 2011 22:15:37 +0200] rev 895
tests: set HOME to the test temp dir (issue2707) [ original upstream message ]
Mon, 14 Mar 2011 23:11:14 +0100 Merge with default stable
Christian Ebert <blacktrash@gmx.net> [Mon, 14 Mar 2011 23:11:14 +0100] rev 894
Merge with default
Mon, 14 Mar 2011 12:26:50 +0100 Offer additional datefilters when the extension is enabled
Christian Ebert <blacktrash@gmx.net> [Mon, 14 Mar 2011 12:26:50 +0100] rev 893
Offer additional datefilters when the extension is enabled Before the additional datefilters (utcdate, svnisodate, svnutcdate) were used when kwtemplater was initialized. Now they always be used once the extension is enabled.
Mon, 14 Mar 2011 12:19:59 +0100 Docstrings for additional date filters
Christian Ebert <blacktrash@gmx.net> [Mon, 14 Mar 2011 12:19:59 +0100] rev 892
Docstrings for additional date filters
Sat, 12 Mar 2011 13:19:55 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sat, 12 Mar 2011 13:19:55 +0100] rev 891
Merge with stable
Sat, 12 Mar 2011 12:46:31 +0100 templates: document missing keywords or filters stable
Patrick Mezard <pmezard@gmail.com> [Sat, 12 Mar 2011 12:46:31 +0100] rev 890
templates: document missing keywords or filters Keywords keywords are not documented yet but are turned into function definitions to avoid lambda docstring weirdness. [ original upstream message ]
Thu, 10 Mar 2011 22:02:02 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Thu, 10 Mar 2011 22:02:02 +0100] rev 889
Merge with stable
Thu, 10 Mar 2011 13:43:47 +0100 tests: use $TESTTMP more and use (glob) less stable
Martin Geisler <mg@aragost.com> [Thu, 10 Mar 2011 13:43:47 +0100] rev 888
tests: use $TESTTMP more and use (glob) less This locks down the test output a little more. [ original upstream message ]
Thu, 10 Mar 2011 22:01:08 +0100 stable: merge with default stable
Christian Ebert <blacktrash@gmx.net> [Thu, 10 Mar 2011 22:01:08 +0100] rev 887
stable: merge with default
Mon, 07 Mar 2011 14:43:27 +0100 README: minimal test command line
Christian Ebert <blacktrash@gmx.net> [Mon, 07 Mar 2011 14:43:27 +0100] rev 886
README: minimal test command line
Mon, 07 Mar 2011 14:41:14 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Mon, 07 Mar 2011 14:41:14 +0100] rev 885
Merge with stable
Thu, 10 Feb 2011 09:03:06 +0100 rollback: clarifies the message about the reverted state (issue2628) stable
Gilles Moris <gilles.moris@free.fr> [Thu, 10 Feb 2011 09:03:06 +0100] rev 884
rollback: clarifies the message about the reverted state (issue2628) Previously, when rolling back a transaction, some users could be confused between the level to which the store is rolled back, and the new parents of the working directory. $ hg rollback rolling back to revision 4 (undo commit) With this change: $ hg rollback repository tip rolled back to tip revision 4 (undo commit) working directory now based on revision 2 and 1 So now the user can realize that the store has been rolled back to an older tip, but also that the working directory may not on the tip (here we are rolling back the merge of the heads 2 and 1) [ original upstream message ]
Mon, 07 Mar 2011 14:34:27 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Mon, 07 Mar 2011 14:34:27 +0100] rev 883
Merge with stable
Sun, 06 Mar 2011 14:19:57 +0100 run-tests: handle mixed comment lines in blacklists stable
Patrick Mezard <pmezard@gmail.com> [Sun, 06 Mar 2011 14:19:57 +0100] rev 882
run-tests: handle mixed comment lines in blacklists [ original upstream message ]
Tue, 15 Feb 2011 10:40:29 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Tue, 15 Feb 2011 10:40:29 +0100] rev 881
Merge with stable
Fri, 24 Dec 2010 15:23:01 +0100 explicitly close files stable
Dan Villiom Podlaski Christiansen <danchr@gmail.com> [Fri, 24 Dec 2010 15:23:01 +0100] rev 880
explicitly close files Add missing calls to close() to many places where files are opened. Relying on reference counting to catch them soon-ish is not portable and fails in environments with a proper GC, such as PyPy. [ original upstream description ]
Fri, 11 Feb 2011 04:55:00 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Fri, 11 Feb 2011 04:55:00 +0100] rev 879
Merge with stable
Wed, 02 Feb 2011 23:21:13 +0100 run-tests: only call WIFEXITED on systems it exists stable
Simon Heimberg <simohe@besonet.ch> [Wed, 02 Feb 2011 23:21:13 +0100] rev 878
run-tests: only call WIFEXITED on systems it exists not on Windows or in jython [ original upstream message ]
Tue, 01 Feb 2011 20:47:05 +0100 run-tests: loadable as module stable
Simon Heimberg <simohe@besonet.ch> [Tue, 01 Feb 2011 20:47:05 +0100] rev 877
run-tests: loadable as module [ original upstream message ]
Wed, 26 Jan 2011 17:49:11 +0000 stable: merge with default stable
Christian Ebert <blacktrash@gmx.net> [Wed, 26 Jan 2011 17:49:11 +0000] rev 876
stable: merge with default
Sun, 23 Jan 2011 03:15:44 +0100 Move repo.__class__ assignment out of monkeypatch context
Christian Ebert <blacktrash@gmx.net> [Sun, 23 Jan 2011 03:15:44 +0100] rev 875
Move repo.__class__ assignment out of monkeypatch context A cosmetic change to improve readability.
Sun, 23 Jan 2011 03:15:39 +0100 Inform user about current keywordset in kwdemo
Christian Ebert <blacktrash@gmx.net> [Sun, 23 Jan 2011 03:15:39 +0100] rev 874
Inform user about current keywordset in kwdemo The kwdemo --default output now looks roughly like this: configuration using default cvs keywordset [extensions] keyword = [keyword] demo.txt = [keywordset] * section added with this change svn = False [keywordmaps] ...
(0) -1000 -240 +240 tip