run-tests: add a lock for console I/O [ original upstream message ]

run-tests: switch timeout handling from alarm to helper thread This should be slightly more portable than signals and be compatible with threaded dispatch. [ original upstream message ]

run-tests: add locking on results struct [ original upstream message ]

Merge with stable

run-tests: fix --interactive (after 994ad067ac6e) - Do not prompt if there is no .err file - Fix source and target paths [ original upstream message ]

run-tests: move test loop into a helper function [ original upstream message ]

run-tests: use a results dict [ original upstream message ]

run-tests: move blacklist and retest filtering to runone [ original upstream message ]

run-tests: keep a list of passed tests [ original upstream message ]

run-tests: move keyword checking into runone [ original upstream message ]

run-tests: add ignores list [ original upstream message ]

run-tests: move existence/name format check into runone [ original upstream message ]

run-tests: move interactive handling into runone [ original upstream message ]

move canonpath from util to scmutil [ original upstream message ]

Merge with stable

tests: better output on timeouts Formerly, timeouts would generate huge scrollback-destroying diffs and weird -15 return codes in the summary. Now we simply report "timed out". [ original upstream message ]

Merge with stable

keyword: convert a verbatim block to a field list [ orginal upstream message ]

Merge with stable

tests: set HOME to the test temp dir (issue2707) [ original upstream message ]

Merge with default

Offer additional datefilters when the extension is enabled Before the additional datefilters (utcdate, svnisodate, svnutcdate) were used when kwtemplater was initialized. Now they always be used once the extension is enabled.

Docstrings for additional date filters

Merge with stable

templates: document missing keywords or filters Keywords keywords are not documented yet but are turned into function definitions to avoid lambda docstring weirdness. [ original upstream message ]

Merge with stable

tests: use $TESTTMP more and use (glob) less This locks down the test output a little more. [ original upstream message ]

stable: merge with default

README: minimal test command line

Merge with stable

rollback: clarifies the message about the reverted state (issue2628) Previously, when rolling back a transaction, some users could be confused between the level to which the store is rolled back, and the new parents of the working directory. $ hg rollback rolling back to revision 4 (undo commit) With this change: $ hg rollback repository tip rolled back to tip revision 4 (undo commit) working directory now based on revision 2 and 1 So now the user can realize that the store has been rolled back to an older tip, but also that the working directory may not on the tip (here we are rolling back the merge of the heads 2 and 1) [ original upstream message ]

Merge with stable

run-tests: handle mixed comment lines in blacklists [ original upstream message ]

Merge with stable

explicitly close files Add missing calls to close() to many places where files are opened. Relying on reference counting to catch them soon-ish is not portable and fails in environments with a proper GC, such as PyPy. [ original upstream description ]

Merge with stable

run-tests: only call WIFEXITED on systems it exists not on Windows or in jython [ original upstream message ]

run-tests: loadable as module [ original upstream message ]

stable: merge with default

Move repo.__class__ assignment out of monkeypatch context A cosmetic change to improve readability.

Inform user about current keywordset in kwdemo The kwdemo --default output now looks roughly like this: configuration using default cvs keywordset [extensions] keyword = [keyword] demo.txt = [keywordset] * section added with this change svn = False [keywordmaps] ...

Update documentation for kwshrink * remove obsolete reference to potential problems with merge and import * emphasize that running kwshrink before configuration changes which affect active/expanded keywords is mandatory

Merge with default

Make kwfiles show deleted files configured for expansion

Colorize hg kwfiles output

Merge with default

Copy: when copied source is a symlink, follow it 1) hg cp symlink copy -> copy is a symlink. 2) cp symlink copy; hg cp -A symlink copy -> copy is a regular file. In the second case we have to follow the symlink to its target to find out whether we have to unexpand keywords in the copy. Add test covering the case where the copied link's target is ignored by keyword but has content which would match the regex for expanded keywords to check whether we indeed leave the destination alone.

Merge with stable

code style: prefer 'is' and 'is not' tests with singletons [ original upstream description ]

Merge with default

s/config/configuration/ in help

Merge with stable

run-tests: fix --debug for .t tests When --debug is given to the test runner, run() returns (retcode, None). Do not try to use None output as a string, and return directly, similarly as other testers. [ original upstream message ]

Merge with stable

run-test: fixed wrong parenthesis Fixed wrong placement of end parenthesis, from b911cb80c671 [ original upstream message ]

Merge with stable

tests: use (esc) markup for string-escape This makes test output less ambiguous. Failing test output will be escaped and marked up if necessary. A Python string-escape compatible encoding is used, but not everything is encoded - especially not \n and \t and '. [ original upstream message ]

tests: (no-eol) markup for command output without trailing LF Output chunks without a trailing LF will now work but get (no-eol) appended. This change mostly moves code around so we can handle that an output line starts with data from previous command, followed by salt and the next command. [ original upstream message ]

tests: handle .t files without trailing LF 9a2de8dae27b made this simple test-test.t succeed silently: $ printf ' $ true' > test-test.t but did not give a usable .err in this case: $ printf ' $ false' > test-test.t The missing LF will now be fixed in the test output and it will thus give a test failure and a solution in the .err file. [ original upstream message ]

Merge with default

Turn regexes and escaped keywords into a propertycache

Merge with stable

run-tests: use regex when searching for $HGPORT in test output This prevents spurious errors when a changeset hash happens to match the port number. Before, this invocation gave a test failure: $ ./run-tests.py test-log.t --port 24427 ERROR: /home/mg/src/mercurial-crew/tests/test-log.t output changed --- /home/mg/src/mercurial-crew/tests/test-log.t +++ /home/mg/src/mercurial-crew/tests/test-log.t.err @@ -626,12 +626,12 @@ $ hg log -b default changeset: 2:c3a4f03cc9a7 - parent: 0:24427303d56f + parent: 0:$HGPORT303d56f user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: commit on default ... [ original upstream message ]

Merge with stable

pull: silence spurious 'requesting all changes' message When issuing `hg pull -r REV` in a repo with no common ancestor with the remote repo, the message 'requesting all changes' is printed, even though only the changese that are ancestors of REV are actually requested. This can be confusing for users (see http://www.selenic.com/pipermail/mercurial/2010-October/035508.html). This silences the message if (and only if) the '-r' option was passed. [ original upstream message ]

Function to look up changectx for expansion Similarly rename variable in kwtemplater.overwrite().

Compile regexes on demand

Merge with default

Fix regressions introduced in 9d01f9cab5e2 - dirstate of overwritten files must be forced to normal with kwexpand/kwshrink, not commit. - recorded files must be weeded before overwriting. - add test cases.

Merge with stable

tests: accept \-escaped test output It changes tsttest to accept expected outputs in python-style \-escapes. It aims to avoid trouble with outputs for non-ascii, color and progress tests. [ original upstream message ]

Merge with default

Only use expensive fctx.cmp when needed Restrict expensive cmp to cases when: - comparing against working directory and - encode filters active or - path is configured for keyword expansion

Merge with stable

filectx: use ctx.size comparisons to speed up ctx.cmp Comparing sizes is cheaper than comparing file contents, as it does not involve reading the file on disk or from the filelog. It is however not always possible: some extensions, or encode filters, change data when extracting it to the working directory. [ original upstream description ]

Merge with stable

Code cleanup - move preselection of expansion candidates for rollback and record into helper function - same overwrite order in rollback and record: 1. modified, 2. added - self.wlock() inside kwrepo class instead of repo.wlock()

enforce subn method via boolean switch There are only 2 patterns to choose, and so far only 1 case where kwtemplater.re_kw.subn is applied on data read from the working directory: when recording added files. With this change the code reflects more closely the boolean character of the switch and underlines the special case.

Fix weeding of expansion candidates when recording Rearrange tests to check this, i.e. that there are changes in other files, not only the recorded one.

Merge with stable

run-tests.py: remove support for .bat files [ original upstream message ]

run-tests.py: do not install hg when the tests do no exist [ original upstream message ]

Merge with stable

test-keyword: ignore subject in notify hook mails Long tmpdir names caused truncation of subject anyway, and that made $TESTTMP replacement fail. [ original upstream description ]

test-keyword: fix test glob to ACL/SELinux flag [ original upstream description ]

tests: reintroduce ":$HGPORT" in test output This reduces the number of patterns that must be adjusted when writing tests. [ original upstream description ]

tests: remove redundant globs Many globs now just match $TESTTMP and is no longer needed. [ original upstream description ]

tests: removed test names in tests The name of the test files is replaced with a glob * expression, thereby the tests does not depend on the filename of the file they are in. [ original upstream description ]

tests: replace test tmp directory with $TESTTMP in test output This reduces the number of patterns that must be adjusted when writing tests. [ original upstream description ]

Merge with stable

run-tests: handle .tst not ending with an LF [ original upstream description ]

tests: show skip reason instead of "irrelevant" with unified tests, too parsehghaveoutput expects just the test output, not the merged test/output, so for skipped unified tests e.g.: Skipped test-convert-darcs.t: missing feature: irrelevant was shown instead of: Skipped test-convert-darcs.t: missing feature: darcs client [ original upstream description ]

run-tests: move build/ directory to HGTMP Before, running a test would give you a build/ directory in the root of your Mercurial source tree. The directory had a full copy of the the source, so a grep in '**/*.py' would find files inside build/. [ original upstream description ]

keyword: fix test glob [ original upstream description ]

Merge with default

Switch kwtemplater.record in kw_dorecord() Obsoletes the need for a global recordcommands variable.

Specific regular expressions depending on read mode More safeguarding against accidental (un)expansion: Reading filelog: act only on \$(kw1|kw2|..)\$ as keywords are always stored unexpanded. Reading wdir: act only on \$(kw1|kw2|..): [^$\n\r]*? \$ as we only are interested in expanded keywords in this situation. Note: we cannot use ..): [^$\n\r]+? \$ because e.g. the {branch} template might be empty. hg record is a special case as we read from the working directory and need one regex each for modified and added files. Therefore test recording an added file. This way we finally also forbid sequences like $Id: $ being treated as keywords.

test: remove remaining sed calls

disable expansion in kwfilelog.read() if file renamed in node Simplifies kwfilelog.cmp() and avoids fiddling with/importing revlog. Reorder imports alphabetically.

Make iskwfile() a weeding method in lieu of a boolean Update iskwfile docstring.

Support copy and rename copy/rename destinations being unversioned and possibly ignored by the extension should not contain expanded keywords. Files copied/renamed from an ignored source are not touched. Add tests covering both of the above cases, plus the corner case of cp symlink foo; hg cp -A symlink foo (where foo becomes a regular file).

Refactor kwtemplater.overwrite() Make kwexpand, kwshrink restricted commands - i.e. read from filelog without expansion for substition in kwtemplater.overwrite, and set/unset restricted mode for overwrite() in in kwcommitctx and the dorecord wrapper. Preselect candidates when working on changed files (rollback, record) outside kwtemplater class, and remove 6th argument from overwrite(). Avoid duplicate substitution/search in overwrite(): Only go into restricted read mode when reading from filelog. rollback and record read from the working directory, where restricted mode would already shrink keywords before overwrite() either expands or shrinks them again. This ensures that the usual automatic operations on keywords are turned off during overwrite() and only overwrite() itself acts on them. Reduce manifest calculation to the cases where it is needed. Move helper function for expansion removal outside kwtemplater class.

Use workingctx to detect modified and added files after rollback

Rename variable "cfiles" to "changed" for clarity

Merge with default

Support rollback by restoring expansion to previous values Prevent spurious differences in the working directory after a rollback. Add tests for several rollback situations.

Do not expand at all during diff Always shrink and never expand keywords during a diff operation. Avoid user distraction e.g. because of spurious differences appearing in the commit editor.

Restore restricted read mode value after overwriting Even though just enforcing expansion after overwriting files in the working directory caused no problems that we know of, this avoids a potential source of problems (e.g. in collaboration other extensions) at no costs.

test: fix typo, rephrase

Merge with default

Use note admonition in help text

Merge with stable

tests: various fixes for new unified test pattern format [ original upstream message ]

tests: add glob matching for unified tests This adds a " (glob)" marker that works like a simpler version of (re): "*" is converted to ".*", and "?" is converted to ".". Both special characters can be escaped using "\", and the backslash itself can be escaped as well. Other glob-style syntax, like "**", "[chars]", or "[!chars]", isn't supported. [ original upstream message ]

tests: require regexes in unified tests to be marked with " (re)" Consider this test: $ hg glog --template '{rev}:{node|short} "{desc}"\n' @ 2:20c4f79fd7ac "3" | | o 1:38f24201dcab "2" |/ o 0:2a18120dc1c9 "1" Because each line beginning with "|" can be compiled as a regular expression (equivalent to ".*|"), they will match any output. Similarly: $ echo foo The blank output line can be compiled as a regular expression and will also match any output. With this patch, none of the above output lines will be matched as regular expressions. A line must end in " (re)" in order to be matched as one. Lines are still matched literally first, so the following will pass: $ echo 'foo (re)' foo (re) [ original upstream message ]

tests: ensure regexes match to the end of the string Regular expressions in the test suite are currently written assuming that you need a trailing ".*" to avoid matching to the end. Instead of matching regular expressions using "^pattern", this patch makes matching more restrictive by matching "^pattern$". [ original upstream message ]

tests: don't match blank output lines as regexes in unified tests Currently, the following unified test will pass: $ echo foo A blank output line (a line containing just two spaces) will match any output. The patch modifies the unified test runner to ignore empty strings strings when do regular expression matching. [ original upstream message ]

tests: improve regexes in unified tests [ original upstream message ]

Merge with stable

tests: add hack to avoid problem with graphlog in unified tests [ original upstream message ]