Sat, 19 Jan 2013 09:40:50 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sat, 19 Jan 2013 09:40:50 +0000] rev 1205
Merge with stable
Fri, 18 Jan 2013 01:23:51 +0100 run-tests.py: don't let hg run interactively in debug mode stable
Mads Kiilerich <madski@unity3d.com> [Fri, 18 Jan 2013 01:23:51 +0100] rev 1204
run-tests.py: don't let hg run interactively in debug mode In normal test mode stdin is closed and hg is thus not interactive. In --debug mode stdin is inherited from the running console and to the tests, and hg could thus wait in prompts when running on Windows. See http://selenic.com/pipermail/mercurial-devel/2013-January/047548.html . Instead set ui.interactive=False to make Mercurial non-interactive. Other commands might still work differently in the --debug environment. This should solve the problem with hg waiting for input but still make it possible to add --debugger to hg in a test and run run-tests.py with --debug. [ original upstream message ]
Fri, 18 Jan 2013 01:16:16 +0100 run-tests.py: backout "don't use console for stdin when running in debug mode" stable
Mads Kiilerich <madski@unity3d.com> [Fri, 18 Jan 2013 01:16:16 +0100] rev 1203
run-tests.py: backout "don't use console for stdin when running in debug mode" f5842787a958 caused that some kind of interactive debugging no longer was possible - such as running hg with --debugger in a test run with run-tests.py --debug . [ original upstream message ]
Wed, 16 Jan 2013 20:56:02 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Wed, 16 Jan 2013 20:56:02 +0000] rev 1202
Merge with stable
Wed, 16 Jan 2013 14:26:19 +0100 get-with-headers: add a --headeronly switch stable
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 16 Jan 2013 14:26:19 +0100] rev 1201
get-with-headers: add a --headeronly switch In some case we do not care about the actual rendering. [ original upstream message ]
Wed, 16 Jan 2013 02:01:11 +0100 tests: make test-hgweb.t output stable stable
Mads Kiilerich <madski@unity3d.com> [Wed, 16 Jan 2013 02:01:11 +0100] rev 1200
tests: make test-hgweb.t output stable Instability introduced in combination of a4d7fd7ad1f7 and e389a25e7e60. [ original upstream message ]
Tue, 15 Jan 2013 20:54:57 +0100 serve: don't send any content headers with 304 responses stable
Mads Kiilerich <madski@unity3d.com> [Tue, 15 Jan 2013 20:54:57 +0100] rev 1199
serve: don't send any content headers with 304 responses Fixes HTTP protocol violation introduced in cf5c76017e11. 'hg serve' would show a stacktrace when loading pages that not had been modified. There was test coverage for this, but the wrong response headers wasn't shown and thus not detected. [ original upstream message ]
Wed, 16 Jan 2013 00:09:26 +0100 destroyed: drop complex branchcache rebuilt logic stable
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 16 Jan 2013 00:09:26 +0100] rev 1198
destroyed: drop complex branchcache rebuilt logic The strip code used a trick to lower the cost of branchcache update after a strip. However is less necessary since we have branchcache collaboration. Invalid branchcache are likely to be cheaply rebuilt again a near subset of the repo. Moreover, this trick would need update to be relevant in the now filtered repository world. It currently update the unfiltered branchcache that few people cares about. Make it smarter on that aspect would need complexes update of the calling logic So this mechanism is: - Arguably needed, - Currently irrelevant, - Hard to update and I'm dropping it. We now update the branchcache in all case by courtesy of the read only reader. This changeset have a few expected impact on the testsuite are different cache are updated. [ original upstream message ]
Wed, 16 Jan 2013 00:08:08 +0100 branchmap: update cache of 'unserved' filter on new changesets stable
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 16 Jan 2013 00:08:08 +0100] rev 1197
branchmap: update cache of 'unserved' filter on new changesets The `commitctx` and `addchangegroup` methods of repo upgrade branchcache after completion. This behavior aims to keep the branchcache in sync for read only process as hgweb. See ee317dbfb9d0 for details. Since changelog filtering is used, those calls only update the cache for unfiltered repo. One of no interest for typical read only process like hgweb. Note: By chance in basic case, `repo.unfiltered() == repo.filtered('unserved')` This changesets have the "unserved" cache updated instead. I think this is the only cache that matter for hgweb. We could imagine updating all possible branchcaches instead but: - I'm not sure it would have any benefit impact. It may even increase the odd of all cache being invalidated. - This is more complicated change. So I'm going for updating a single cache only which is already better that updating a cache nobody cares about. This changeset have a few expected impact on the testsuite are different cache are updated. [ original upstream message ]
Tue, 15 Jan 2013 23:30:10 +0100 tests: run with PYTHONHASHSEED=random stable
Mads Kiilerich <madski@unity3d.com> [Tue, 15 Jan 2013 23:30:10 +0100] rev 1196
tests: run with PYTHONHASHSEED=random Python set and dict iteration order is in principle undefined but usually 'quite stable'. Setting PYTHONHASHSEED=random will make the iteration order more random in Python 2.6.8 and 2.7.3 and where it has been backported. This can thus help spot dependencies on undefined behaviour and prevent future problems. [ original upstream message ]
Tue, 15 Jan 2013 13:33:28 -0800 run-tests: exit cleanly if parallel run is interrupted stable
Bryan O'Sullivan <bryano@fb.com> [Tue, 15 Jan 2013 13:33:28 -0800] rev 1195
run-tests: exit cleanly if parallel run is interrupted If interrupted while running with "--jobs N", run-tests asynchronously spewed a bunch of output and backtraces from both the master and slave processes, leaving the terminal full of goop. This patch makes it behave more sensibly. [ original upstream message ]
Sun, 13 Jan 2013 01:39:16 -0600 filtering: rename filters to their antonyms stable
Kevin Bullock <kbullock@ringworld.org> [Sun, 13 Jan 2013 01:39:16 -0600] rev 1194
filtering: rename filters to their antonyms Now that changelog filtering is in place, it's become evident that naming the filters according to the set of revs _not_ included in the filtered changelog is confusing. This is especially evident in the collaborative branch cache scheme. This changes the names of the filters to reflect the revs that _are_ included: hidden -> visible unserved -> served mutable -> immutable impactable -> base repoview.filteredrevs is renamed to filterrevs, so that callers read a bit more sensibly, e.g.: filterrevs('visible') # filter revs according to what's visible [ original upstream message ]
Fri, 11 Jan 2013 18:33:15 +0000 Merge with default stable
Christian Ebert <blacktrash@gmx.net> [Fri, 11 Jan 2013 18:33:15 +0000] rev 1193
Merge with default
Thu, 10 Jan 2013 16:25:06 +0000 test: improve grammar and spelling in branchcache note
Christian Ebert <blacktrash@gmx.net> [Thu, 10 Jan 2013 16:25:06 +0000] rev 1192
test: improve grammar and spelling in branchcache note See: 769eb1b179b5
Thu, 10 Jan 2013 16:02:08 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Thu, 10 Jan 2013 16:02:08 +0000] rev 1191
Merge with stable
Wed, 09 Jan 2013 13:16:54 -0800 hghave: introduce a test (unused) for cvs >= 1.12 stable
Bryan O'Sullivan <bryano@fb.com> [Wed, 09 Jan 2013 13:16:54 -0800] rev 1190
hghave: introduce a test (unused) for cvs >= 1.12 [ original upstream message ]
Tue, 08 Jan 2013 20:37:37 +0100 clfilter: enforce hidden changeset globally stable
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 08 Jan 2013 20:37:37 +0100] rev 1189
clfilter: enforce hidden changeset globally The dispatch code now enables filtering of "hidden" changesets globally. The filter is installed before command and extension invocation. The `--hidden` switch is now global and disables this filtering for any command. Code in log dedicated to changeset exclusion is removed as this global filtering has the same effect. [ original upstream message ]
Tue, 08 Jan 2013 12:41:51 +0100 branchcache: add note about cache invalidation to test-keyword.t stable
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 08 Jan 2013 12:41:51 +0100] rev 1188
branchcache: add note about cache invalidation to test-keyword.t [Should've been included in aff706b3a21c.] --Kevin Bullock <kbullock@ringworld.org> [ original upstream message ]
Wed, 02 Jan 2013 01:57:46 +0100 clfilter: add mutable filtering stable
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 02 Jan 2013 01:57:46 +0100] rev 1187
clfilter: add mutable filtering It filters all mutable changesets, leaving only public changeset unfiltered. This filtering set is expected to be much more stable that the previous one as public changeset are unlikely to disapear. The only official use of this filter is for branchcache. [ original upstream message ]
Mon, 07 Jan 2013 02:14:41 +0100 run-tests.py: fix handling of symlink to the right python stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 07 Jan 2013 02:14:41 +0100] rev 1186
run-tests.py: fix handling of symlink to the right python Before: a symlink for python in BINDIR was sometimes created, but it was never updated when a different Python was used and it was never removed. An invalid python could thus be left around and used when testing with --local. Now: the symlink is removed when wrong and created when necessary. The mechanism for finding the right name (python or python.exe) also had to be simplified and made more explicit. [ original upstream message ]
Mon, 07 Jan 2013 23:30:00 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Mon, 07 Jan 2013 23:30:00 +0000] rev 1185
Merge with stable
Mon, 07 Jan 2013 17:23:25 +0100 branchmap: allow to use cache of subset stable
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Mon, 07 Jan 2013 17:23:25 +0100] rev 1184
branchmap: allow to use cache of subset Filtered repository are *subset* of unfiltered repository. This means that a filtered branchmap could be use to compute the unfiltered version. And filtered version happen to be subset of each other: - "all() - unserved()" is a subset of "all() - hidden()" - "all() - hidden()" is a subset of "all()" This means that branchmap with "unfiltered" filter can be used as a base for "hidden" branchmap that itself could be used as a base for unfiltered branchmap. unserved < hidden < None This changeset implements this mechanism. If the on disk branchcache is not valid we use the branchcache of the nearest subset as base instead of computing it from scratch. Such fallback can be cascaded multiple time is necessary. Note that both "hidden" and "unserved" set are a bit volatile. We will add more stable filtering in next changesets. This changeset enables collaboration between no filtering and "unserved" filtering. Fixing performance regression introduced by 47f00b0de337 [ original upstream message ]
Mon, 07 Jan 2013 02:00:43 +0100 run-tests.py: don't use console for stdin when running in debug mode stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 07 Jan 2013 02:00:43 +0100] rev 1183
run-tests.py: don't use console for stdin when running in debug mode Tests would wait for input instead of using non-interactive mode. [ original upstream message ]
Mon, 07 Jan 2013 02:00:43 +0100 tests: make hghave and run-tests exit on unknown feature requirements stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 07 Jan 2013 02:00:43 +0100] rev 1182
tests: make hghave and run-tests exit on unknown feature requirements [ original upstream message ]
Fri, 04 Jan 2013 20:12:31 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Fri, 04 Jan 2013 20:12:31 +0000] rev 1181
Merge with stable
Fri, 21 Dec 2012 17:19:52 +0100 localrepo: filter unknown nodes from the phasecache on destroyed stable
Idan Kamara <idankk86@gmail.com> [Fri, 21 Dec 2012 17:19:52 +0100] rev 1180
localrepo: filter unknown nodes from the phasecache on destroyed When commit is followed by strip (qrefresh), phasecache contains nodes that were removed from the changelog. Since phasecache is filecached with .hg/store/phaseroots which doesn't change as a result of stripping, we have to filter it manually. If we don't write it immediately, the next time it is read from disk the nodes will be filtered again. That's what happened before, but there's no reason not to write it immediately. The change in test-keyword.t is caused by the above. [ original upstream message ]
Sat, 29 Dec 2012 02:35:54 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sat, 29 Dec 2012 02:35:54 +0000] rev 1179
Merge with stable
Fri, 28 Dec 2012 00:02:40 +0100 strip: do not update branchcache during strip (issue3745) stable
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Fri, 28 Dec 2012 00:02:40 +0100] rev 1178
strip: do not update branchcache during strip (issue3745) At this moment, the cache is invalid, and will be thrown away. Later the strip function will call the `localrepo.destroyed` method that will update the branchmap cache. [ original upstream message ]
Mon, 24 Dec 2012 02:49:59 +0100 branchmap: move validity logic in the object itself stable
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Mon, 24 Dec 2012 02:49:59 +0100] rev 1177
branchmap: move validity logic in the object itself In several place, We check if a branchcache is still valid regarding the current state of the repository. This changeset puts this logic in a method of the object that can be reused when necessary. A branch map is considered valid whenever it is up to date or a strict subset of the repository state. The change will help making branchcache aware of filtered revision. The change in keyword is expected. the branch cache is actually invalid after the amend. The previous check did not detected it. [ original upstream message ]
Fri, 21 Dec 2012 15:21:55 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Fri, 21 Dec 2012 15:21:55 +0000] rev 1176
Merge with stable
Wed, 12 Dec 2012 15:17:18 -0800 run-tests: fix whitespace nonsense stable
Bryan O'Sullivan <bos@serpentine.com> [Wed, 12 Dec 2012 15:17:18 -0800] rev 1175
run-tests: fix whitespace nonsense [ original upstream message ]
Wed, 12 Dec 2012 14:52:58 -0800 run-tests: on windows, put correct python at front of PATH stable
Bryan O'Sullivan <bryano@fb.com> [Wed, 12 Dec 2012 14:52:58 -0800] rev 1174
run-tests: on windows, put correct python at front of PATH The older approach of trying to copy the python executable into the test directory was doomed to fail. There remains one weakness with this approach: if you've run "make local", tests may pick up the wrong extension DLLs from inside the source tree. I don't know why this happens. A reasonable workaround for now is to test either using --local or with a working directory that does not contain built DLLs. [ original upstream message ]
Sun, 09 Dec 2012 23:33:16 +0100 tests: kill daemons early, making breaking at "Accept" prompt safe stable
Mads Kiilerich <madski@unity3d.com> [Sun, 09 Dec 2012 23:33:16 +0100] rev 1173
tests: kill daemons early, making breaking at "Accept" prompt safe [ original upstream message ]
Tue, 11 Dec 2012 15:38:42 -0800 run-tests: fix exename on Windows stable
Siddharth Agarwal <sid0@fb.com> [Tue, 11 Dec 2012 15:38:42 -0800] rev 1172
run-tests: fix exename on Windows [ original upstream message ]
Tue, 11 Dec 2012 15:13:23 -0800 run-tests: support running tests in parallel on windows stable
Bryan O'Sullivan <bryano@fb.com> [Tue, 11 Dec 2012 15:13:23 -0800] rev 1171
run-tests: support running tests in parallel on windows Previously, we used os.spawnvp, which doesn't exist on Windows, and isn't needed anyway (the command line begins with an absolute path). We also need a slightly more convoluted way to wait for processes without specifying an order on Windows, as it lacks os.wait. [ original upstream message ]
Mon, 10 Dec 2012 12:14:55 -0800 run-tests: use correct python safely under --jobs stable
Bryan O'Sullivan <bryano@fb.com> [Mon, 10 Dec 2012 12:14:55 -0800] rev 1170
run-tests: use correct python safely under --jobs [ original upstream message ]
Mon, 10 Dec 2012 12:09:02 -0800 run-tests: check for the correct python when starting stable
Bryan O'Sullivan <bryano@fb.com> [Mon, 10 Dec 2012 12:09:02 -0800] rev 1169
run-tests: check for the correct python when starting [ original upstream message ]
Mon, 10 Dec 2012 12:07:42 -0800 run-tests: use correct python when run with --local stable
Bryan O'Sullivan <bryano@fb.com> [Mon, 10 Dec 2012 12:07:42 -0800] rev 1168
run-tests: use correct python when run with --local [ original upstream message ]
Wed, 28 Nov 2012 23:59:39 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Wed, 28 Nov 2012 23:59:39 +0000] rev 1167
Merge with stable
Tue, 27 Nov 2012 13:09:05 -0800 run-tests: fix an unnoticed check-code violation stable
Bryan O'Sullivan <bryano@fb.com> [Tue, 27 Nov 2012 13:09:05 -0800] rev 1166
run-tests: fix an unnoticed check-code violation [ original upstream message ]
Tue, 27 Nov 2012 11:18:33 -0800 run-tests: add a --compiler option stable
Bryan O'Sullivan <bryano@fb.com> [Tue, 27 Nov 2012 11:18:33 -0800] rev 1165
run-tests: add a --compiler option Without this option, it is not possible to run the test suite on Windows using mingw's gcc as the compiler. [ original upstream message ]
Tue, 27 Nov 2012 11:18:31 -0800 run-tests: make build command line less intimidating stable
Bryan O'Sullivan <bryano@fb.com> [Tue, 27 Nov 2012 11:18:31 -0800] rev 1164
run-tests: make build command line less intimidating Use a dict for parameters to the format string, instead of a ridiculous number of positional parameters. [ original upstream message ]
Wed, 14 Nov 2012 18:08:39 -0600 run-tests: backout 4a4173519b63 stable
Matt Mackall <mpm@selenic.com> [Wed, 14 Nov 2012 18:08:39 -0600] rev 1163
run-tests: backout 4a4173519b63 This deleted work in progress to eliminate child processes for -j. [ original upstream message ]
Wed, 14 Nov 2012 13:25:00 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Wed, 14 Nov 2012 13:25:00 +0000] rev 1162
Merge with stable
Thu, 08 Nov 2012 14:10:04 -0800 run-tests.py: remove runqueue's results parameter since it is now a global stable
Siddharth Agarwal <sid0@fb.com> [Thu, 08 Nov 2012 14:10:04 -0800] rev 1161
run-tests.py: remove runqueue's results parameter since it is now a global [ original upstream message ]
Sat, 10 Nov 2012 11:37:41 -0800 run-tests: open child-parent pipes in binary mode stable
Siddharth Agarwal <sid0@fb.com> [Sat, 10 Nov 2012 11:37:41 -0800] rev 1160
run-tests: open child-parent pipes in binary mode Python's pickle is a binary format. [ original upstream message ]
Fri, 09 Nov 2012 14:49:30 -0800 run-tests: add --time option to log times for each test stable
Siddharth Agarwal <sid0@fb.com> [Fri, 09 Nov 2012 14:49:30 -0800] rev 1159
run-tests: add --time option to log times for each test --time also prints out the wall-clock time each test takes in descending order. [ original upstream message ]
Fri, 09 Nov 2012 15:09:35 -0800 run-tests: remove resultslock since it serves no useful purpose stable
Siddharth Agarwal <sid0@fb.com> [Fri, 09 Nov 2012 15:09:35 -0800] rev 1158
run-tests: remove resultslock since it serves no useful purpose Each child process has its own copy of the results dict, so all access to the results dict is serial. [ original upstream message ]
Fri, 09 Nov 2012 14:42:36 -0800 run-tests: use pickle to send results from children to parent stable
Siddharth Agarwal <sid0@fb.com> [Fri, 09 Nov 2012 14:42:36 -0800] rev 1157
run-tests: use pickle to send results from children to parent JSON would probably be preferable, but it isn't available for Python 2.4 or 2.5. [ original upstream message ]
Thu, 08 Nov 2012 18:35:43 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Thu, 08 Nov 2012 18:35:43 +0000] rev 1156
Merge with stable
Wed, 24 Oct 2012 23:09:31 +0200 run-tests: skip unnecessary operations on the args in the child proces stable
Simon Heimberg <simohe@besonet.ch> [Wed, 24 Oct 2012 23:09:31 +0200] rev 1155
run-tests: skip unnecessary operations on the args in the child proces The arguments are already sorted and never empty. [ original upstream message ]
Sun, 21 Oct 2012 16:10:25 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sun, 21 Oct 2012 16:10:25 +0100] rev 1154
Merge with stable
Sun, 21 Oct 2012 16:10:04 +0100 Merge with default stable
Christian Ebert <blacktrash@gmx.net> [Sun, 21 Oct 2012 16:10:04 +0100] rev 1153
Merge with default
Thu, 18 Oct 2012 00:44:32 +0200 run-tests: remove dead code for supporting old test scripts stable
Mads Kiilerich <mads@kiilerich.com> [Thu, 18 Oct 2012 00:44:32 +0200] rev 1152
run-tests: remove dead code for supporting old test scripts [ original upstream message ]
Thu, 18 Oct 2012 00:33:29 +0200 run-tests: handle windows crlf in .py tests again stable
Mads Kiilerich <mads@kiilerich.com> [Thu, 18 Oct 2012 00:33:29 +0200] rev 1151
run-tests: handle windows crlf in .py tests again Before af7c6bc48d8d all crlf occurrences in test output on Windows were simply changed to lf. In af7c6bc48d8d it was replaced by more clever handling in the .t test runner ... but the .py runner was forgotten and many .py tests were failing on Windows. The crlf/lf replacement is now reintroduced in the py test runner. [ original upstream message ]
Sun, 14 Oct 2012 18:30:42 +0200 run-tests: make it possible to combine (esc) with (glob) and (re) stable
Mads Kiilerich <mads@kiilerich.com> [Sun, 14 Oct 2012 18:30:42 +0200] rev 1150
run-tests: make it possible to combine (esc) with (glob) and (re) This makes it possible to combine the annotations ... if done in the right order. [ original upstream message ]
Mon, 15 Oct 2012 02:33:12 +0200 run-tests: alternative way of handling \r on Windows stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 15 Oct 2012 02:33:12 +0200] rev 1149
run-tests: alternative way of handling \r on Windows After f71d60da58fb all \r was stripped from output on Windows, and the places where a \r explicitly was expected it was accepted that it was missing. Ugly hack. Instead we now accept that an extra \r might appear at the end of lines on Windows. That is more to the point and less ugly. [ original upstream message ]
Thu, 18 Oct 2012 22:12:15 +0200 amend: add noise in extra to avoid creating obsolescence cycle (issue3664) stable
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 18 Oct 2012 22:12:15 +0200] rev 1148
amend: add noise in extra to avoid creating obsolescence cycle (issue3664) Obsolescence cycle are bad and should be avoided as much as possible. The current amend implemented touch changeset meta data as few as possible. This make is easy for amend to result in the same node than a precursors. We add some deterministic noise in extra to avoid this. In practice, the hex of the amended changeset is stored in 'amend_source' extra key. [ original upstream message ]
Thu, 18 Oct 2012 16:28:04 +0200 Move commands.inferrepo for code maintenance
Christian Ebert <blacktrash@gmx.net> [Thu, 18 Oct 2012 16:28:04 +0200] rev 1147
Move commands.inferrepo for code maintenance
Wed, 17 Oct 2012 17:19:48 +0200 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Wed, 17 Oct 2012 17:19:48 +0200] rev 1146
Merge with stable
Tue, 16 Oct 2012 11:43:15 -0700 commands: don't infer repo for commands like update (issue2748) stable
Siddharth Agarwal <sid0@fb.com> [Tue, 16 Oct 2012 11:43:15 -0700] rev 1145
commands: don't infer repo for commands like update (issue2748) Maintain a whitelist of commands to infer the repo for instead. The whitelist contains those commands that take file(s) in the working dir as arguments. [ original upstream message ]
Fri, 12 Oct 2012 23:47:40 +0200 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Fri, 12 Oct 2012 23:47:40 +0200] rev 1144
Merge with stable
Thu, 11 Oct 2012 16:05:14 -0700 tests: correctly report a test killed by a signal stable
Bryan O'Sullivan <bryano@fb.com> [Thu, 11 Oct 2012 16:05:14 -0700] rev 1143
tests: correctly report a test killed by a signal [ original upstream message ]
Fri, 12 Oct 2012 23:46:19 +0200 Merge with default stable
Christian Ebert <blacktrash@gmx.net> [Fri, 12 Oct 2012 23:46:19 +0200] rev 1142
Merge with default
Fri, 10 Aug 2012 20:37:20 +0100 Avoid traceback caused by bogus date input (issue3344)
Christian Ebert <blacktrash@gmx.net> [Fri, 10 Aug 2012 20:37:20 +0100] rev 1141
Avoid traceback caused by bogus date input (issue3344) Wrap datefilters which split date texts with util.parsedate. We do not abort, as the bogus date must have been given by the user.
Thu, 11 Oct 2012 19:46:25 +0200 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Thu, 11 Oct 2012 19:46:25 +0200] rev 1140
Merge with stable
Wed, 26 Sep 2012 00:56:27 +0200 run-tests: allow test output lines to be terminated with \r in addition to \n stable
Mads Kiilerich <mads@kiilerich.com> [Wed, 26 Sep 2012 00:56:27 +0200] rev 1139
run-tests: allow test output lines to be terminated with \r in addition to \n str.splitlines could not be used in 546c76e5a3e6, but _now_ we would like to have lines with other line endings than \n. Some fine occurences of (esc) markup of \r is replaced with multiple lines ending with '\r (no-eol) (esc)'. That is no win but also no significant loss. This change makes it possible to drop filtercr.py - _that_ is a win. [ original upstream message ]
Wed, 10 Oct 2012 01:37:53 +0200 run-tests: use more explicit criteria for detecting no-eol stable
Mads Kiilerich <mads@kiilerich.com> [Wed, 10 Oct 2012 01:37:53 +0200] rev 1138
run-tests: use more explicit criteria for detecting no-eol Preparing for the situation where there could be unsalted lines not terminated with \n. [ original upstream message ]
Wed, 10 Oct 2012 11:31:01 +0200 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Wed, 10 Oct 2012 11:31:01 +0200] rev 1137
Merge with stable
Thu, 04 Oct 2012 16:52:20 +0200 subrepo, hghave: use "svn --version --quiet" to determine version number stable
Thomas Arendsen Hein <thomas@intevation.de> [Thu, 04 Oct 2012 16:52:20 +0200] rev 1136
subrepo, hghave: use "svn --version --quiet" to determine version number svn --version --quiet is implemented since svn 0.14.1 (August 2002) and prints just the version number, not the long output (21 lines) of "svn --version". Additionally I expect this output format to be more stable, at least it is not changed with different translations. [ original upstream message ]
Wed, 10 Oct 2012 01:30:45 +0200 run-tests: drop unused enumerate stable
Mads Kiilerich <mads@kiilerich.com> [Wed, 10 Oct 2012 01:30:45 +0200] rev 1135
run-tests: drop unused enumerate [ original upstream message ]
Wed, 19 Sep 2012 00:59:23 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Wed, 19 Sep 2012 00:59:23 +0100] rev 1134
Merge with stable
Sun, 09 Sep 2012 12:31:14 +0200 test-http-branchmap: enable on Windows stable
Patrick Mezard <patrick@mezard.eu> [Sun, 09 Sep 2012 12:31:14 +0200] rev 1133
test-http-branchmap: enable on Windows Tests using "hg serve --daemon" are currently disabled on Windows for lack of proper kill utility. The one shipped with MinGW operates on internal process identifiers and not on the ones recorded by hg serve. Fortunately we can replace most of them by calls to killdaemons.py. This patch is a proof of concept on how to run these tests on Windows. The plan is: - Check test-http-branchmap.t does not fail/hang on the buildbot - Convert all kill utility calls to killdaemons.py calls. - Add a rule in check-code.py to forbid kill calls, or ignore the remaining ones (test-hup.t, etc.). - Possibly drop the 'serve' rule from hghave. The: listening at http://*:$HGPORT1/ line does not appear on Windows because the detached process can no longer write on its parent streams. Grepping hg serve stdout directly causes the parent process to never return and hangs the test. This is a bug, but I have no simple solution and prefer to pay this small price and enable hg serve tests on Windows. [ orginal upstream message ]
Thu, 13 Sep 2012 23:02:29 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Thu, 13 Sep 2012 23:02:29 +0100] rev 1132
Merge with stable
Sat, 28 Jul 2012 23:28:17 +0200 tests: unset variable HG if it is set stable
Simon Heimberg <simohe@besonet.ch> [Sat, 28 Jul 2012 23:28:17 +0200] rev 1131
tests: unset variable HG if it is set When hg tries to call itself it can call a different hg executable when this variable is set. Some tests fail when the called hg version is different. [ original upstream message ]
Wed, 12 Sep 2012 18:44:43 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Wed, 12 Sep 2012 18:44:43 +0100] rev 1130
Merge with stable
Fri, 17 Aug 2012 13:58:18 -0700 spelling: destination stable
timeless@mozdev.org [Fri, 17 Aug 2012 13:58:18 -0700] rev 1129
spelling: destination [ original upstream message ]
Mon, 20 Aug 2012 22:36:51 +0200 killdaemons: take file argument explicitely stable
Patrick Mezard <patrick@mezard.eu> [Mon, 20 Aug 2012 22:36:51 +0200] rev 1128
killdaemons: take file argument explicitely It makes it easier to use as a generic replacement for kill utility, mostly for Windows tests. [ original upstream message ]
Sun, 19 Aug 2012 18:06:15 +0200 killdaemons: add windows implementation stable
Patrick Mezard <patrick@mezard.eu> [Sun, 19 Aug 2012 18:06:15 +0200] rev 1127
killdaemons: add windows implementation [ original upstream message ]
Sun, 19 Aug 2012 16:41:09 +0200 run-tests: do not duplicate killdaemons() code stable
Patrick Mezard <patrick@mezard.eu> [Sun, 19 Aug 2012 16:41:09 +0200] rev 1126
run-tests: do not duplicate killdaemons() code [ original upstream message ]
Wed, 14 Apr 2010 17:58:10 +0900 pylint, pyflakes: remove unused or duplicate imports stable
Nicolas Dumazet <nicdumz.commits@gmail.com> [Wed, 14 Apr 2010 17:58:10 +0900] rev 1125
pylint, pyflakes: remove unused or duplicate imports [ original upstream message, already done for run-tests.py ]
Sun, 05 Jul 2009 11:01:30 +0200 compat: use open() instead of file() everywhere stable
Alejandro Santos <alejolp@alejolp.com> [Sun, 05 Jul 2009 11:01:30 +0200] rev 1124
compat: use open() instead of file() everywhere [ original upstream message only for killdaemons here ]
Fri, 07 Nov 2008 16:28:53 -0600 tests: add killdaemons helper script stable
Matt Mackall <mpm@selenic.com> [Fri, 07 Nov 2008 16:28:53 -0600] rev 1123
tests: add killdaemons helper script [ orgininal upstream message ]
Thu, 30 Aug 2012 16:18:03 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Thu, 30 Aug 2012 16:18:03 +0100] rev 1122
Merge with stable
Wed, 15 Aug 2012 22:38:42 +0200 fix trivial spelling errors stable
Mads Kiilerich <mads@kiilerich.com> [Wed, 15 Aug 2012 22:38:42 +0200] rev 1121
fix trivial spelling errors [ original upstream message ]
Thu, 09 Aug 2012 12:52:34 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Thu, 09 Aug 2012 12:52:34 +0100] rev 1120
Merge with stable
Wed, 08 Aug 2012 18:10:16 +0200 check-code: fix check for trailing whitespace on sh command lines stable
Mads Kiilerich <mads@kiilerich.com> [Wed, 08 Aug 2012 18:10:16 +0200] rev 1119
check-code: fix check for trailing whitespace on sh command lines The $ has been without necessary escaping since introduced in c7d23b4ca4ba. [ original upstream message ]
Wed, 04 Jul 2012 12:06:34 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Wed, 04 Jul 2012 12:06:34 +0100] rev 1118
Merge with stable
Tue, 03 Jul 2012 18:02:07 +0200 test-keyword: adapt for Windows stable
Adrian Buehlmann <adrian@cadifra.com> [Tue, 03 Jul 2012 18:02:07 +0200] rev 1117
test-keyword: adapt for Windows [ original upstream message ]
Wed, 04 Jul 2012 02:04:58 +0200 tests: don't use dates before epoch in test-keyword.t stable
Mads Kiilerich <mads@kiilerich.com> [Wed, 04 Jul 2012 02:04:58 +0200] rev 1116
tests: don't use dates before epoch in test-keyword.t Timezone offsets of less than a minute is not shown but can cause displayed dates to be before epoch start - and dates before epoch start is not shown correctly on Windows (see also 4d5b12a5517b). These 'negative' dates could be considered undefined behaviour so we don't care and swap the tests values for timestamp and timezone. [ original upstream message ]
Wed, 04 Jul 2012 12:04:06 +0100 Merge with default stable
Christian Ebert <blacktrash@gmx.net> [Wed, 04 Jul 2012 12:04:06 +0100] rev 1115
Merge with default
Thu, 28 Jun 2012 23:19:35 +0100 Use ui.formatter for kwfiles output
Christian Ebert <blacktrash@gmx.net> [Thu, 28 Jun 2012 23:19:35 +0100] rev 1114
Use ui.formatter for kwfiles output
Fri, 22 Jun 2012 13:40:23 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Fri, 22 Jun 2012 13:40:23 +0100] rev 1113
Merge with stable
Fri, 18 May 2012 12:45:47 -0700 strip: incrementally update the branchheads cache after a strip stable
Joshua Redstone <joshua.redstone@fb.com> [Fri, 18 May 2012 12:45:47 -0700] rev 1112
strip: incrementally update the branchheads cache after a strip This function augments strip to incrementally update the branchheads cache rather than recompute it from scratch. This speeds up the performance of strip and rebase on repos with long history. The performance optimization only happens if the revisions stripped are all on the same branch and the parents of the stripped revisions are also on that same branch. This adds a few test cases, particularly one that reproduces the extra heads that mpm observed. [ original upstream message ]
Thu, 21 Jun 2012 14:04:15 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Thu, 21 Jun 2012 14:04:15 +0100] rev 1111
Merge with stable
Mon, 07 Nov 2011 13:46:41 -0600 run-tests: replace inline python handling with more native scheme stable
Matt Mackall <mpm@selenic.com> [Mon, 07 Nov 2011 13:46:41 -0600] rev 1110
run-tests: replace inline python handling with more native scheme Normally changes in tests are reported like this in diffs: $ cat foo - a + b Using -i mode lets us update tests when the new results are correct and/or populate tests with their output. But with the standard doctest framework, inline Python sections in tests changes instead result in a big failure report that's unhelpful. So here, we replace the doctest calls with a simple compile/eval loop. [ original upstream message - missed change to heredoctest ]
Tue, 01 Nov 2011 12:25:54 -0700 tests: fix readline escape characters in heredoctest.py/test-url.py stable
Brodie Rao <brodie@bitheap.org> [Tue, 01 Nov 2011 12:25:54 -0700] rev 1109
tests: fix readline escape characters in heredoctest.py/test-url.py This fix mirrors the changes made to test-doctest.py in b856071435f7 and 967adcf5910d. Without this change, tests running heredoctest.py can fail on certain versions of OS X when TERM is set to xterm-256color: $ /opt/local/Library/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents/MacOS/Python -m heredoctest <<EOF > >>> open('b', 'w').write('this' * 1000) > EOF + \x1b[?1034h (no-eol) (esc) A similar problem occurs with test-url.py: $ ./run-tests.py test-url.py --- .../tests/test-url.py.out +++ .../tests/test-url.py.err @@ -0,0 +1 @@ + ERROR: .../test-url.py output changed ! Failed test-url.py: output changed # Ran 1 tests, 0 skipped, 1 failed. [ original upstream message ]
Thu, 13 Oct 2011 17:54:35 +0200 tests: remove temp doctest file when finished running it stable
Idan Kamara <idankk86@gmail.com> [Thu, 13 Oct 2011 17:54:35 +0200] rev 1108
tests: remove temp doctest file when finished running it [ original upstream message ]
Wed, 12 Oct 2011 22:01:13 +0200 tests: add helper script for processing doctests read from stdin stable
Idan Kamara <idankk86@gmail.com> [Wed, 12 Oct 2011 22:01:13 +0200] rev 1107
tests: add helper script for processing doctests read from stdin Writes stdin to a temp file and doctests it. In the future we might want to spare the temp file and directly call into doctest. Also, with some tweaking it seems possible to adjust the line numbers reported in an error report so they match the ones in the original file. [ original upstream message ]
Thu, 21 Jun 2012 03:05:02 +0200 tests: prepare get-with-headers.py for MSYS stable
Mads Kiilerich <mads@kiilerich.com> [Thu, 21 Jun 2012 03:05:02 +0200] rev 1106
tests: prepare get-with-headers.py for MSYS get-with-headers.py took the http GET parameter as a command line parameter that had to start with '/'. MSYS on windows will mangle such paths. Instead of applying a workaround everywhere (such as an extra '/') we let get-with-headers.py add the mandatory '/'. That is consistent with the url path handling in the Mercurial url class. A few tests sent 'GET ?cmd=...' which is invalid. They will now send 'GET /?cmd=...'. This will not enable any tests for being run on windows - only remove one reason they were disabled. [ original upstream message ]
Wed, 20 Jun 2012 23:41:21 +0200 tests: hghave outer-repo should be true even if a bad repo is found stable
Mads Kiilerich <mads@kiilerich.com> [Wed, 20 Jun 2012 23:41:21 +0200] rev 1105
tests: hghave outer-repo should be true even if a bad repo is found Only the abort message 'no repository found' is a reliable indication that there is no outer repo. [ original upstream message ]
Wed, 20 Jun 2012 23:41:21 +0200 tests: add missing no-outer-repo requirements stable
Mads Kiilerich <mads@kiilerich.com> [Wed, 20 Jun 2012 23:41:21 +0200] rev 1104
tests: add missing no-outer-repo requirements Outer repos (if any) will now never be touched by the tests. But it is better to run without any repos around the tmp directory. [ original upstream message ]
Tue, 19 Jun 2012 16:00:31 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Tue, 19 Jun 2012 16:00:31 +0100] rev 1103
Merge with stable
Fri, 15 Jun 2012 00:02:27 +0200 tests: introduce hghave hardlinks stable
Mads Kiilerich <mads@kiilerich.com> [Fri, 15 Jun 2012 00:02:27 +0200] rev 1102
tests: introduce hghave hardlinks Some tests can't be run on FAT filesystems because it doesn't support hardlinks. [ original upstream message ]
Fri, 15 Jun 2012 00:02:27 +0200 tests/hghave: test that the inotify unix socket actually can be created stable
Mads Kiilerich <mads@kiilerich.com> [Fri, 15 Jun 2012 00:02:27 +0200] rev 1101
tests/hghave: test that the inotify unix socket actually can be created Inotify do not work on FAT filesystems. [ original upstream message ]
Fri, 15 Jun 2012 00:02:27 +0200 tests/hghave: test that a fifo actually can be created on the filesystem stable
Mads Kiilerich <mads@kiilerich.com> [Fri, 15 Jun 2012 00:02:27 +0200] rev 1100
tests/hghave: test that a fifo actually can be created on the filesystem Some tests were failing on FAT filesystems. [ original upstream message ]
Fri, 15 Jun 2012 00:02:27 +0200 tests/hghave: consistently use dir='.', prefix=tempprefix for tempfiles stable
Mads Kiilerich <mads@kiilerich.com> [Fri, 15 Jun 2012 00:02:27 +0200] rev 1099
tests/hghave: consistently use dir='.', prefix=tempprefix for tempfiles Some feature tests were done in the wrong directory and could thus give the wrong result. [ original upstream message ]
Thu, 14 Jun 2012 12:54:54 +0200 tests/hghave: extract hghave.py stable
Adrian Buehlmann <adrian@cadifra.com> [Thu, 14 Jun 2012 12:54:54 +0200] rev 1098
tests/hghave: extract hghave.py hghave is degraded to a bare script, moving the functions to hghave.py so they can be shared later on. [ original upstream message ]
Mon, 11 Jun 2012 13:56:02 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Mon, 11 Jun 2012 13:56:02 +0100] rev 1097
Merge with stable
Mon, 11 Jun 2012 01:40:51 +0200 tests: add missing trailing 'cd ..' stable
Mads Kiilerich <mads@kiilerich.com> [Mon, 11 Jun 2012 01:40:51 +0200] rev 1096
tests: add missing trailing 'cd ..' Many tests didn't change back from subdirectories at the end of the tests ... and they don't have to. The missing 'cd ..' could always be added when another test case is added to the test file. This change do that tests (99.5%) consistently end up in $TESTDIR where they started, thus making it simpler to extend them or move them around. [ original upstream message ]
Sun, 10 Jun 2012 18:50:42 +0200 tests: convert some 'hghave symlink' to #if stable
Mads Kiilerich <mads@kiilerich.com> [Sun, 10 Jun 2012 18:50:42 +0200] rev 1095
tests: convert some 'hghave symlink' to #if This will enable some tests for windows. [ original upstream message ]
Sun, 10 Jun 2012 18:50:42 +0200 tests: use the right directory for running hghave from run-tests.py stable
Mads Kiilerich <mads@kiilerich.com> [Sun, 10 Jun 2012 18:50:42 +0200] rev 1094
tests: use the right directory for running hghave from run-tests.py [ original upstream message ]
Sun, 10 Jun 2012 18:50:42 +0200 tests: make .t tests stop immediately if a cd fails stable
Mads Kiilerich <mads@kiilerich.com> [Sun, 10 Jun 2012 18:50:42 +0200] rev 1093
tests: make .t tests stop immediately if a cd fails This prevents tests from escaping from TESTTMP as a consequence of a failing directory creation. [ original upstream message ]
Sun, 10 Jun 2012 16:32:22 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Sun, 10 Jun 2012 16:32:22 +0100] rev 1092
Merge with stable
Fri, 08 Jun 2012 15:11:05 +0200 tests/hghave: implement #if true / #if false stable
Adrian Buehlmann <adrian@cadifra.com> [Fri, 08 Jun 2012 15:11:05 +0200] rev 1091
tests/hghave: implement #if true / #if false For unconditionally testing / skipping a section. Useful for testing the test infrastructure in test-run-tests.t and for debugging/developing tests. [ original upstream message ]
Sun, 10 Jun 2012 03:05:59 +0200 tests/run-tests: avoid C:/ in arguments stable
Adrian Buehlmann <adrian@cadifra.com> [Sun, 10 Jun 2012 03:05:59 +0200] rev 1090
tests/run-tests: avoid C:/ in arguments MSYS replaces C:/... in arguments with C;... as it interprets the C:/ as a colon separated POSIX path list. The colon is replaced with ; (path separator on Windows) according to http://www.mingw.org/wiki/Posix_path_conversion So we must not replace \ with / for neither $TESTTMP nor $TESTDIR, but we have to keep replacing \ with / for the Popen4 call of function hghave. If we don't do the latter, test-run-tests.t will fail with $ python run-tests.py --local test-run-tests.t --- C:\Users\adi\hgrepos\hg-main\tests\test-run-tests.t +++ C:\Users\adi\hgrepos\hg-main\tests\test-run-tests.t.err @@ -70,6 +70,7 @@ tested #else $ echo skipped + skipped #endif #if false An additional tweak in test-ssh.t is needed that globs away an encoded path, as it can't be translated back to $TESTTMP, because the backslashes in the output have been already encoded as %5C. This patch makes test-ssh.t pass in MSYS on Windows. [ original upstream message ]
Sun, 27 May 2012 18:25:04 +0200 hghave: wrap command in 'sh -c "..."' for has_pyflakes() stable
Adrian Buehlmann <adrian@cadifra.com> [Sun, 27 May 2012 18:25:04 +0200] rev 1089
hghave: wrap command in 'sh -c "..."' for has_pyflakes() Without this, the has_pyflakes() check always fails in MSYS on Windows. [ original upstream message ]
Fri, 08 Jun 2012 15:11:05 +0200 tests/run-tests: use $TMP on Windows (issue3490) stable
Adrian Buehlmann <adrian@cadifra.com> [Fri, 08 Jun 2012 15:11:05 +0200] rev 1088
tests/run-tests: use $TMP on Windows (issue3490) This is just a short-term workaround for that issue. More work needs to be done on scmutil.canonpath & friends. $TMP on Windows is specified to be defined, and it has correct casing, so we can use that as the default dir for tempfile.mkdtemp on Windows. [ original upstream message ]
Tue, 05 Jun 2012 00:20:53 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Tue, 05 Jun 2012 00:20:53 +0100] rev 1087
Merge with stable
Fri, 01 Jun 2012 02:25:12 +0200 tests: introduce c-style conditional sections in .t tests stable
Mads Kiilerich <mads@kiilerich.com> [Fri, 01 Jun 2012 02:25:12 +0200] rev 1086
tests: introduce c-style conditional sections in .t tests This makes it possible to have conditional sections like: #if windows $ echo foo foo #else $ echo bar bar #endif The directives and skipped sections are treated like comments, so don't interleave them with commands and their output. The parameters to #if are evaluated while preparing the test by passing them over to hghave. Requirements can thus be negated with 'no-' prefix, and multiple requirements must all be true to return true. [ original upstream message ]
(0) -1000 -120 +120 tip