Merge with stable

run-tests.py: don't let hg run interactively in debug mode In normal test mode stdin is closed and hg is thus not interactive. In --debug mode stdin is inherited from the running console and to the tests, and hg could thus wait in prompts when running on Windows. See http://selenic.com/pipermail/mercurial-devel/2013-January/047548.html . Instead set ui.interactive=False to make Mercurial non-interactive. Other commands might still work differently in the --debug environment. This should solve the problem with hg waiting for input but still make it possible to add --debugger to hg in a test and run run-tests.py with --debug. [ original upstream message ]

run-tests.py: backout "don't use console for stdin when running in debug mode" f5842787a958 caused that some kind of interactive debugging no longer was possible - such as running hg with --debugger in a test run with run-tests.py --debug . [ original upstream message ]

Merge with stable

get-with-headers: add a --headeronly switch In some case we do not care about the actual rendering. [ original upstream message ]

tests: make test-hgweb.t output stable Instability introduced in combination of a4d7fd7ad1f7 and e389a25e7e60. [ original upstream message ]

serve: don't send any content headers with 304 responses Fixes HTTP protocol violation introduced in cf5c76017e11. 'hg serve' would show a stacktrace when loading pages that not had been modified. There was test coverage for this, but the wrong response headers wasn't shown and thus not detected. [ original upstream message ]

destroyed: drop complex branchcache rebuilt logic The strip code used a trick to lower the cost of branchcache update after a strip. However is less necessary since we have branchcache collaboration. Invalid branchcache are likely to be cheaply rebuilt again a near subset of the repo. Moreover, this trick would need update to be relevant in the now filtered repository world. It currently update the unfiltered branchcache that few people cares about. Make it smarter on that aspect would need complexes update of the calling logic So this mechanism is: - Arguably needed, - Currently irrelevant, - Hard to update and I'm dropping it. We now update the branchcache in all case by courtesy of the read only reader. This changeset have a few expected impact on the testsuite are different cache are updated. [ original upstream message ]

branchmap: update cache of 'unserved' filter on new changesets The `commitctx` and `addchangegroup` methods of repo upgrade branchcache after completion. This behavior aims to keep the branchcache in sync for read only process as hgweb. See ee317dbfb9d0 for details. Since changelog filtering is used, those calls only update the cache for unfiltered repo. One of no interest for typical read only process like hgweb. Note: By chance in basic case, `repo.unfiltered() == repo.filtered('unserved')` This changesets have the "unserved" cache updated instead. I think this is the only cache that matter for hgweb. We could imagine updating all possible branchcaches instead but: - I'm not sure it would have any benefit impact. It may even increase the odd of all cache being invalidated. - This is more complicated change. So I'm going for updating a single cache only which is already better that updating a cache nobody cares about. This changeset have a few expected impact on the testsuite are different cache are updated. [ original upstream message ]

tests: run with PYTHONHASHSEED=random Python set and dict iteration order is in principle undefined but usually 'quite stable'. Setting PYTHONHASHSEED=random will make the iteration order more random in Python 2.6.8 and 2.7.3 and where it has been backported. This can thus help spot dependencies on undefined behaviour and prevent future problems. [ original upstream message ]

run-tests: exit cleanly if parallel run is interrupted If interrupted while running with "--jobs N", run-tests asynchronously spewed a bunch of output and backtraces from both the master and slave processes, leaving the terminal full of goop. This patch makes it behave more sensibly. [ original upstream message ]

filtering: rename filters to their antonyms Now that changelog filtering is in place, it's become evident that naming the filters according to the set of revs _not_ included in the filtered changelog is confusing. This is especially evident in the collaborative branch cache scheme. This changes the names of the filters to reflect the revs that _are_ included: hidden -> visible unserved -> served mutable -> immutable impactable -> base repoview.filteredrevs is renamed to filterrevs, so that callers read a bit more sensibly, e.g.: filterrevs('visible') # filter revs according to what's visible [ original upstream message ]

Merge with default

test: improve grammar and spelling in branchcache note See: 769eb1b179b5

Merge with stable

hghave: introduce a test (unused) for cvs >= 1.12 [ original upstream message ]

clfilter: enforce hidden changeset globally The dispatch code now enables filtering of "hidden" changesets globally. The filter is installed before command and extension invocation. The `--hidden` switch is now global and disables this filtering for any command. Code in log dedicated to changeset exclusion is removed as this global filtering has the same effect. [ original upstream message ]

branchcache: add note about cache invalidation to test-keyword.t [Should've been included in aff706b3a21c.] --Kevin Bullock <kbullock@ringworld.org> [ original upstream message ]

clfilter: add mutable filtering It filters all mutable changesets, leaving only public changeset unfiltered. This filtering set is expected to be much more stable that the previous one as public changeset are unlikely to disapear. The only official use of this filter is for branchcache. [ original upstream message ]

run-tests.py: fix handling of symlink to the right python Before: a symlink for python in BINDIR was sometimes created, but it was never updated when a different Python was used and it was never removed. An invalid python could thus be left around and used when testing with --local. Now: the symlink is removed when wrong and created when necessary. The mechanism for finding the right name (python or python.exe) also had to be simplified and made more explicit. [ original upstream message ]

Merge with stable

branchmap: allow to use cache of subset Filtered repository are *subset* of unfiltered repository. This means that a filtered branchmap could be use to compute the unfiltered version. And filtered version happen to be subset of each other: - "all() - unserved()" is a subset of "all() - hidden()" - "all() - hidden()" is a subset of "all()" This means that branchmap with "unfiltered" filter can be used as a base for "hidden" branchmap that itself could be used as a base for unfiltered branchmap. unserved < hidden < None This changeset implements this mechanism. If the on disk branchcache is not valid we use the branchcache of the nearest subset as base instead of computing it from scratch. Such fallback can be cascaded multiple time is necessary. Note that both "hidden" and "unserved" set are a bit volatile. We will add more stable filtering in next changesets. This changeset enables collaboration between no filtering and "unserved" filtering. Fixing performance regression introduced by 47f00b0de337 [ original upstream message ]

run-tests.py: don't use console for stdin when running in debug mode Tests would wait for input instead of using non-interactive mode. [ original upstream message ]

tests: make hghave and run-tests exit on unknown feature requirements [ original upstream message ]

Merge with stable

localrepo: filter unknown nodes from the phasecache on destroyed When commit is followed by strip (qrefresh), phasecache contains nodes that were removed from the changelog. Since phasecache is filecached with .hg/store/phaseroots which doesn't change as a result of stripping, we have to filter it manually. If we don't write it immediately, the next time it is read from disk the nodes will be filtered again. That's what happened before, but there's no reason not to write it immediately. The change in test-keyword.t is caused by the above. [ original upstream message ]

Merge with stable

strip: do not update branchcache during strip (issue3745) At this moment, the cache is invalid, and will be thrown away. Later the strip function will call the `localrepo.destroyed` method that will update the branchmap cache. [ original upstream message ]

branchmap: move validity logic in the object itself In several place, We check if a branchcache is still valid regarding the current state of the repository. This changeset puts this logic in a method of the object that can be reused when necessary. A branch map is considered valid whenever it is up to date or a strict subset of the repository state. The change will help making branchcache aware of filtered revision. The change in keyword is expected. the branch cache is actually invalid after the amend. The previous check did not detected it. [ original upstream message ]

Merge with stable

run-tests: fix whitespace nonsense [ original upstream message ]

run-tests: on windows, put correct python at front of PATH The older approach of trying to copy the python executable into the test directory was doomed to fail. There remains one weakness with this approach: if you've run "make local", tests may pick up the wrong extension DLLs from inside the source tree. I don't know why this happens. A reasonable workaround for now is to test either using --local or with a working directory that does not contain built DLLs. [ original upstream message ]

tests: kill daemons early, making breaking at "Accept" prompt safe [ original upstream message ]

run-tests: fix exename on Windows [ original upstream message ]

run-tests: support running tests in parallel on windows Previously, we used os.spawnvp, which doesn't exist on Windows, and isn't needed anyway (the command line begins with an absolute path). We also need a slightly more convoluted way to wait for processes without specifying an order on Windows, as it lacks os.wait. [ original upstream message ]

run-tests: use correct python safely under --jobs [ original upstream message ]

run-tests: check for the correct python when starting [ original upstream message ]

run-tests: use correct python when run with --local [ original upstream message ]

Merge with stable

run-tests: fix an unnoticed check-code violation [ original upstream message ]

run-tests: add a --compiler option Without this option, it is not possible to run the test suite on Windows using mingw's gcc as the compiler. [ original upstream message ]

run-tests: make build command line less intimidating Use a dict for parameters to the format string, instead of a ridiculous number of positional parameters. [ original upstream message ]

run-tests: backout 4a4173519b63 This deleted work in progress to eliminate child processes for -j. [ original upstream message ]

Merge with stable

run-tests.py: remove runqueue's results parameter since it is now a global [ original upstream message ]

run-tests: open child-parent pipes in binary mode Python's pickle is a binary format. [ original upstream message ]

run-tests: add --time option to log times for each test --time also prints out the wall-clock time each test takes in descending order. [ original upstream message ]

run-tests: remove resultslock since it serves no useful purpose Each child process has its own copy of the results dict, so all access to the results dict is serial. [ original upstream message ]

run-tests: use pickle to send results from children to parent JSON would probably be preferable, but it isn't available for Python 2.4 or 2.5. [ original upstream message ]

Merge with stable

run-tests: skip unnecessary operations on the args in the child proces The arguments are already sorted and never empty. [ original upstream message ]

Merge with stable

Merge with default

run-tests: remove dead code for supporting old test scripts [ original upstream message ]

run-tests: handle windows crlf in .py tests again Before af7c6bc48d8d all crlf occurrences in test output on Windows were simply changed to lf. In af7c6bc48d8d it was replaced by more clever handling in the .t test runner ... but the .py runner was forgotten and many .py tests were failing on Windows. The crlf/lf replacement is now reintroduced in the py test runner. [ original upstream message ]

run-tests: make it possible to combine (esc) with (glob) and (re) This makes it possible to combine the annotations ... if done in the right order. [ original upstream message ]

run-tests: alternative way of handling \r on Windows After f71d60da58fb all \r was stripped from output on Windows, and the places where a \r explicitly was expected it was accepted that it was missing. Ugly hack. Instead we now accept that an extra \r might appear at the end of lines on Windows. That is more to the point and less ugly. [ original upstream message ]

amend: add noise in extra to avoid creating obsolescence cycle (issue3664) Obsolescence cycle are bad and should be avoided as much as possible. The current amend implemented touch changeset meta data as few as possible. This make is easy for amend to result in the same node than a precursors. We add some deterministic noise in extra to avoid this. In practice, the hex of the amended changeset is stored in 'amend_source' extra key. [ original upstream message ]

Move commands.inferrepo for code maintenance

Merge with stable

commands: don't infer repo for commands like update (issue2748) Maintain a whitelist of commands to infer the repo for instead. The whitelist contains those commands that take file(s) in the working dir as arguments. [ original upstream message ]

Merge with stable

tests: correctly report a test killed by a signal [ original upstream message ]

Merge with default