Merge with stable

branchmap: allow to use cache of subset Filtered repository are *subset* of unfiltered repository. This means that a filtered branchmap could be use to compute the unfiltered version. And filtered version happen to be subset of each other: - "all() - unserved()" is a subset of "all() - hidden()" - "all() - hidden()" is a subset of "all()" This means that branchmap with "unfiltered" filter can be used as a base for "hidden" branchmap that itself could be used as a base for unfiltered branchmap. unserved < hidden < None This changeset implements this mechanism. If the on disk branchcache is not valid we use the branchcache of the nearest subset as base instead of computing it from scratch. Such fallback can be cascaded multiple time is necessary. Note that both "hidden" and "unserved" set are a bit volatile. We will add more stable filtering in next changesets. This changeset enables collaboration between no filtering and "unserved" filtering. Fixing performance regression introduced by 47f00b0de337 [ original upstream message ]

run-tests.py: don't use console for stdin when running in debug mode Tests would wait for input instead of using non-interactive mode. [ original upstream message ]

tests: make hghave and run-tests exit on unknown feature requirements [ original upstream message ]

Merge with stable

localrepo: filter unknown nodes from the phasecache on destroyed When commit is followed by strip (qrefresh), phasecache contains nodes that were removed from the changelog. Since phasecache is filecached with .hg/store/phaseroots which doesn't change as a result of stripping, we have to filter it manually. If we don't write it immediately, the next time it is read from disk the nodes will be filtered again. That's what happened before, but there's no reason not to write it immediately. The change in test-keyword.t is caused by the above. [ original upstream message ]

Merge with stable

strip: do not update branchcache during strip (issue3745) At this moment, the cache is invalid, and will be thrown away. Later the strip function will call the `localrepo.destroyed` method that will update the branchmap cache. [ original upstream message ]

branchmap: move validity logic in the object itself In several place, We check if a branchcache is still valid regarding the current state of the repository. This changeset puts this logic in a method of the object that can be reused when necessary. A branch map is considered valid whenever it is up to date or a strict subset of the repository state. The change will help making branchcache aware of filtered revision. The change in keyword is expected. the branch cache is actually invalid after the amend. The previous check did not detected it. [ original upstream message ]

Merge with stable

run-tests: fix whitespace nonsense [ original upstream message ]

run-tests: on windows, put correct python at front of PATH The older approach of trying to copy the python executable into the test directory was doomed to fail. There remains one weakness with this approach: if you've run "make local", tests may pick up the wrong extension DLLs from inside the source tree. I don't know why this happens. A reasonable workaround for now is to test either using --local or with a working directory that does not contain built DLLs. [ original upstream message ]

tests: kill daemons early, making breaking at "Accept" prompt safe [ original upstream message ]

run-tests: fix exename on Windows [ original upstream message ]

run-tests: support running tests in parallel on windows Previously, we used os.spawnvp, which doesn't exist on Windows, and isn't needed anyway (the command line begins with an absolute path). We also need a slightly more convoluted way to wait for processes without specifying an order on Windows, as it lacks os.wait. [ original upstream message ]

run-tests: use correct python safely under --jobs [ original upstream message ]

run-tests: check for the correct python when starting [ original upstream message ]

run-tests: use correct python when run with --local [ original upstream message ]

Merge with stable

run-tests: fix an unnoticed check-code violation [ original upstream message ]

run-tests: add a --compiler option Without this option, it is not possible to run the test suite on Windows using mingw's gcc as the compiler. [ original upstream message ]

run-tests: make build command line less intimidating Use a dict for parameters to the format string, instead of a ridiculous number of positional parameters. [ original upstream message ]

run-tests: backout 4a4173519b63 This deleted work in progress to eliminate child processes for -j. [ original upstream message ]

Merge with stable

run-tests.py: remove runqueue's results parameter since it is now a global [ original upstream message ]

run-tests: open child-parent pipes in binary mode Python's pickle is a binary format. [ original upstream message ]

run-tests: add --time option to log times for each test --time also prints out the wall-clock time each test takes in descending order. [ original upstream message ]

run-tests: remove resultslock since it serves no useful purpose Each child process has its own copy of the results dict, so all access to the results dict is serial. [ original upstream message ]

run-tests: use pickle to send results from children to parent JSON would probably be preferable, but it isn't available for Python 2.4 or 2.5. [ original upstream message ]

Merge with stable

run-tests: skip unnecessary operations on the args in the child proces The arguments are already sorted and never empty. [ original upstream message ]

Merge with stable

Merge with default

run-tests: remove dead code for supporting old test scripts [ original upstream message ]

run-tests: handle windows crlf in .py tests again Before af7c6bc48d8d all crlf occurrences in test output on Windows were simply changed to lf. In af7c6bc48d8d it was replaced by more clever handling in the .t test runner ... but the .py runner was forgotten and many .py tests were failing on Windows. The crlf/lf replacement is now reintroduced in the py test runner. [ original upstream message ]

run-tests: make it possible to combine (esc) with (glob) and (re) This makes it possible to combine the annotations ... if done in the right order. [ original upstream message ]

run-tests: alternative way of handling \r on Windows After f71d60da58fb all \r was stripped from output on Windows, and the places where a \r explicitly was expected it was accepted that it was missing. Ugly hack. Instead we now accept that an extra \r might appear at the end of lines on Windows. That is more to the point and less ugly. [ original upstream message ]

amend: add noise in extra to avoid creating obsolescence cycle (issue3664) Obsolescence cycle are bad and should be avoided as much as possible. The current amend implemented touch changeset meta data as few as possible. This make is easy for amend to result in the same node than a precursors. We add some deterministic noise in extra to avoid this. In practice, the hex of the amended changeset is stored in 'amend_source' extra key. [ original upstream message ]

Move commands.inferrepo for code maintenance

Merge with stable

commands: don't infer repo for commands like update (issue2748) Maintain a whitelist of commands to infer the repo for instead. The whitelist contains those commands that take file(s) in the working dir as arguments. [ original upstream message ]

Merge with stable

tests: correctly report a test killed by a signal [ original upstream message ]

Merge with default

Avoid traceback caused by bogus date input (issue3344) Wrap datefilters which split date texts with util.parsedate. We do not abort, as the bogus date must have been given by the user.

Merge with stable

run-tests: allow test output lines to be terminated with \r in addition to \n str.splitlines could not be used in 546c76e5a3e6, but _now_ we would like to have lines with other line endings than \n. Some fine occurences of (esc) markup of \r is replaced with multiple lines ending with '\r (no-eol) (esc)'. That is no win but also no significant loss. This change makes it possible to drop filtercr.py - _that_ is a win. [ original upstream message ]

run-tests: use more explicit criteria for detecting no-eol Preparing for the situation where there could be unsalted lines not terminated with \n. [ original upstream message ]

Merge with stable

subrepo, hghave: use "svn --version --quiet" to determine version number svn --version --quiet is implemented since svn 0.14.1 (August 2002) and prints just the version number, not the long output (21 lines) of "svn --version". Additionally I expect this output format to be more stable, at least it is not changed with different translations. [ original upstream message ]

run-tests: drop unused enumerate [ original upstream message ]

Merge with stable

test-http-branchmap: enable on Windows Tests using "hg serve --daemon" are currently disabled on Windows for lack of proper kill utility. The one shipped with MinGW operates on internal process identifiers and not on the ones recorded by hg serve. Fortunately we can replace most of them by calls to killdaemons.py. This patch is a proof of concept on how to run these tests on Windows. The plan is: - Check test-http-branchmap.t does not fail/hang on the buildbot - Convert all kill utility calls to killdaemons.py calls. - Add a rule in check-code.py to forbid kill calls, or ignore the remaining ones (test-hup.t, etc.). - Possibly drop the 'serve' rule from hghave. The: listening at http://*:$HGPORT1/ line does not appear on Windows because the detached process can no longer write on its parent streams. Grepping hg serve stdout directly causes the parent process to never return and hangs the test. This is a bug, but I have no simple solution and prefer to pay this small price and enable hg serve tests on Windows. [ orginal upstream message ]

Merge with stable

tests: unset variable HG if it is set When hg tries to call itself it can call a different hg executable when this variable is set. Some tests fail when the called hg version is different. [ original upstream message ]

Merge with stable

spelling: destination [ original upstream message ]

killdaemons: take file argument explicitely It makes it easier to use as a generic replacement for kill utility, mostly for Windows tests. [ original upstream message ]

killdaemons: add windows implementation [ original upstream message ]

run-tests: do not duplicate killdaemons() code [ original upstream message ]

pylint, pyflakes: remove unused or duplicate imports [ original upstream message, already done for run-tests.py ]

compat: use open() instead of file() everywhere [ original upstream message only for killdaemons here ]

tests: add killdaemons helper script [ orgininal upstream message ]

Merge with stable

fix trivial spelling errors [ original upstream message ]

Merge with stable

check-code: fix check for trailing whitespace on sh command lines The $ has been without necessary escaping since introduced in c7d23b4ca4ba. [ original upstream message ]

Merge with stable

test-keyword: adapt for Windows [ original upstream message ]

tests: don't use dates before epoch in test-keyword.t Timezone offsets of less than a minute is not shown but can cause displayed dates to be before epoch start - and dates before epoch start is not shown correctly on Windows (see also 4d5b12a5517b). These 'negative' dates could be considered undefined behaviour so we don't care and swap the tests values for timestamp and timezone. [ original upstream message ]

Merge with default

Use ui.formatter for kwfiles output

Merge with stable

strip: incrementally update the branchheads cache after a strip This function augments strip to incrementally update the branchheads cache rather than recompute it from scratch. This speeds up the performance of strip and rebase on repos with long history. The performance optimization only happens if the revisions stripped are all on the same branch and the parents of the stripped revisions are also on that same branch. This adds a few test cases, particularly one that reproduces the extra heads that mpm observed. [ original upstream message ]

Merge with stable

run-tests: replace inline python handling with more native scheme Normally changes in tests are reported like this in diffs: $ cat foo - a + b Using -i mode lets us update tests when the new results are correct and/or populate tests with their output. But with the standard doctest framework, inline Python sections in tests changes instead result in a big failure report that's unhelpful. So here, we replace the doctest calls with a simple compile/eval loop. [ original upstream message - missed change to heredoctest ]

tests: fix readline escape characters in heredoctest.py/test-url.py This fix mirrors the changes made to test-doctest.py in b856071435f7 and 967adcf5910d. Without this change, tests running heredoctest.py can fail on certain versions of OS X when TERM is set to xterm-256color: $ /opt/local/Library/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents/MacOS/Python -m heredoctest <<EOF > >>> open('b', 'w').write('this' * 1000) > EOF + \x1b[?1034h (no-eol) (esc) A similar problem occurs with test-url.py: $ ./run-tests.py test-url.py --- .../tests/test-url.py.out +++ .../tests/test-url.py.err @@ -0,0 +1 @@ + ERROR: .../test-url.py output changed ! Failed test-url.py: output changed # Ran 1 tests, 0 skipped, 1 failed. [ original upstream message ]

tests: remove temp doctest file when finished running it [ original upstream message ]

tests: add helper script for processing doctests read from stdin Writes stdin to a temp file and doctests it. In the future we might want to spare the temp file and directly call into doctest. Also, with some tweaking it seems possible to adjust the line numbers reported in an error report so they match the ones in the original file. [ original upstream message ]

tests: prepare get-with-headers.py for MSYS get-with-headers.py took the http GET parameter as a command line parameter that had to start with '/'. MSYS on windows will mangle such paths. Instead of applying a workaround everywhere (such as an extra '/') we let get-with-headers.py add the mandatory '/'. That is consistent with the url path handling in the Mercurial url class. A few tests sent 'GET ?cmd=...' which is invalid. They will now send 'GET /?cmd=...'. This will not enable any tests for being run on windows - only remove one reason they were disabled. [ original upstream message ]

tests: hghave outer-repo should be true even if a bad repo is found Only the abort message 'no repository found' is a reliable indication that there is no outer repo. [ original upstream message ]

tests: add missing no-outer-repo requirements Outer repos (if any) will now never be touched by the tests. But it is better to run without any repos around the tmp directory. [ original upstream message ]

Merge with stable

tests: introduce hghave hardlinks Some tests can't be run on FAT filesystems because it doesn't support hardlinks. [ original upstream message ]

tests/hghave: test that the inotify unix socket actually can be created Inotify do not work on FAT filesystems. [ original upstream message ]

tests/hghave: test that a fifo actually can be created on the filesystem Some tests were failing on FAT filesystems. [ original upstream message ]

tests/hghave: consistently use dir='.', prefix=tempprefix for tempfiles Some feature tests were done in the wrong directory and could thus give the wrong result. [ original upstream message ]

tests/hghave: extract hghave.py hghave is degraded to a bare script, moving the functions to hghave.py so they can be shared later on. [ original upstream message ]

Merge with stable

tests: add missing trailing 'cd ..' Many tests didn't change back from subdirectories at the end of the tests ... and they don't have to. The missing 'cd ..' could always be added when another test case is added to the test file. This change do that tests (99.5%) consistently end up in $TESTDIR where they started, thus making it simpler to extend them or move them around. [ original upstream message ]

tests: convert some 'hghave symlink' to #if This will enable some tests for windows. [ original upstream message ]

tests: use the right directory for running hghave from run-tests.py [ original upstream message ]

tests: make .t tests stop immediately if a cd fails This prevents tests from escaping from TESTTMP as a consequence of a failing directory creation. [ original upstream message ]

Merge with stable

tests/hghave: implement #if true / #if false For unconditionally testing / skipping a section. Useful for testing the test infrastructure in test-run-tests.t and for debugging/developing tests. [ original upstream message ]

tests/run-tests: avoid C:/ in arguments MSYS replaces C:/... in arguments with C;... as it interprets the C:/ as a colon separated POSIX path list. The colon is replaced with ; (path separator on Windows) according to http://www.mingw.org/wiki/Posix_path_conversion So we must not replace \ with / for neither $TESTTMP nor $TESTDIR, but we have to keep replacing \ with / for the Popen4 call of function hghave. If we don't do the latter, test-run-tests.t will fail with $ python run-tests.py --local test-run-tests.t --- C:\Users\adi\hgrepos\hg-main\tests\test-run-tests.t +++ C:\Users\adi\hgrepos\hg-main\tests\test-run-tests.t.err @@ -70,6 +70,7 @@ tested #else $ echo skipped + skipped #endif #if false An additional tweak in test-ssh.t is needed that globs away an encoded path, as it can't be translated back to $TESTTMP, because the backslashes in the output have been already encoded as %5C. This patch makes test-ssh.t pass in MSYS on Windows. [ original upstream message ]

hghave: wrap command in 'sh -c "..."' for has_pyflakes() Without this, the has_pyflakes() check always fails in MSYS on Windows. [ original upstream message ]

tests/run-tests: use $TMP on Windows (issue3490) This is just a short-term workaround for that issue. More work needs to be done on scmutil.canonpath & friends. $TMP on Windows is specified to be defined, and it has correct casing, so we can use that as the default dir for tempfile.mkdtemp on Windows. [ original upstream message ]

Merge with stable

tests: introduce c-style conditional sections in .t tests This makes it possible to have conditional sections like: #if windows $ echo foo foo #else $ echo bar bar #endif The directives and skipped sections are treated like comments, so don't interleave them with commands and their output. The parameters to #if are evaluated while preparing the test by passing them over to hghave. Requirements can thus be negated with 'no-' prefix, and multiple requirements must all be true to return true. [ original upstream message ]

run-tests: don't add python lines to expected dict For test input lines of *.t files starting with ' >>> ', the code block for ' >>> ' 609: if l.startswith(' >>> '): # python inlines 610: after.setdefault(pos, []).append(l) was (unsurprisingly) executed, but because there was an "if" instead of an "elif" on the condition "l.startswith(' ... ')", program execution proceeded to line 636 635: elif l.startswith(' '): # results 636: # queue up a list of expected results 637: expected.setdefault(pos, []).append(l[2:]) due to the fact that if l starts with ' >>> ' it also starts with ' '. The net effect was that python command lines in *.t files were (surprisingly) also added to the "expected" dict. This caused no externally observable bad behavior, as the "expected" dict was not consulted for these lines. [ original upstream message ]

run-test: replace backslashes in TESTDIR This may cause troubles in MSYS on Windows. [ original upstream message ]

Merge with default

Update copyleft

Wlock cmdutil.copy wrapper Expanding/shrinking happens outside the wrapped copy function; therefore write lock the repo.

Support commit --amend (issue3471) Include a test as well.

Rename kwt.record attribute to kwt.postcommit A more general descriptive name, as the attribute will be used for commit --amend as well.

Merge with stable

hgext: mark all first-party extensions as such [ original upstream message ]

Merge with default

Intentionally ignore check-code warning about unwrapped ui message

Merge with stable

cleanup: "not x in y" -> "x not in y" [ original upstream message ]

cleanup: replace naked excepts with more specific ones [ original upstream message ]

cleanup: replace hasattr() usage with getattr() in hghave [ original upstream message ]

cleanup: "x != None" -> "x is not None" [ original upstream message ]

cleanup: eradicate long lines [ original upstream message ]

tests: set a standard terminal type This makes test-ui-color.py happy when run in a dumb terminal. Spotted by Jesse Glick <jesse.glick@oracle.com> [ original upstream message ]

repair: no need to call filterunknown() in strip() Calling strip() will eventually trigger localrepo.destroyed() which will invalidate _parseroots. It will call filterunknown() upon reload. Changes to test-keyword.t are related to commit --debug running after either qpop or rollback. [ original upstream message ]

Merge with stable

tests: don't require 'hg' without extension on windows Hackable uses hg.exe instead. [ original upstream message ]

Merge with stable

hghave: remove symlink test made useless by ac0da5caebec [ original upstream message ]

Merge with stable

tests: make tests work if directory contains special characters With this quoting tests will work e.g. in "/tmp/foo bar/mercurial/". [ original upstream message ]

Merge with stable

tests: shorten post-test sleeps This helps expose races [ original upstream message ]

Merge with stable

record: allow splitting of hunks by manually editing patches It is possible that unrelated changes in a file are on sequential lines. The current record extension does not allow these to be committed independently. An example use case for this is in software development for deeply embedded real-time systems. In these environments, it is not always possible to use a debugger (due to time-constraints) and hence inline UART-based printing is often used. When fixing a bug in a module, it is often convenient to add a large number of 'printf's (linked to the UART via a custom fputc) to the module in order to work out what is going wrong. printf is a very slow function (and also variadic so somewhat frowned upon by the MISRA standard) and hence it is highly undesirable to commit these lines to the repository. If only a partial fix is implemented, however, it is desirable to commit the fix without deleting all of the printf lines. This is also simplifies removal of the printf lines as once the final fix is committed, 'hg revert' does the rest. It is likely that the printf lines will be very near the actual fix, so being able to split the hunk is very useful in this case. There were two alternatives I considered for the user interface. One was to manually edit the patch, the other to allow a hunk to be split into individual lines for consideration. The latter option would require a significant refactor of the record module and is less flexible. While the former is potentially more complicated to use, this is a feature that is likely to only be used in certain exceptional cases (such as the use case proposed above) and hence I felt that the complexity would not be a considerable issue. I've also written a follow-up patch that refactors the 'prompt' code to base everything on the choices variable. This tidies up and clarifies the code a bit (removes constructs like 'if ret == 7' and removes the 'e' option from the file scope options as it's not relevant there. It's not really a necessity, so I've excluded it from this submission for now, but I can send it separately if there's a desire and it's on bitbucket (see below) in the meantime. Possible future improvements include: * Tidying up the 'prompt' code to base everything on the choices variable. This would allow entries to be removed from the prompt as currently 'e' is offered even for entire file patches, which is currently unsupported. * Allowing the entire file (or even multi-file) patch to be edited manually: this would require quite a large refactor without much benefit, so I decided to exclude it from the initial submission. * Allow the option to retry if a patch fails to apply (this is what Git does). This would require quite a bit of refactoring given the current 'hg record' implementation, so it's debatable whether it's worth it. Output is similar to existing record user interface except that an additional option ('e') exists to allow manual editing of the patch. This opens the user's configured editor with the patch. A comment is added to the bottom of the patch explaining what to do (based on Git's one). A large proportion of the changeset is test-case changes to update the options reported by record (Ynesfdaq? instead of Ynsfdaq?). Functional changes are in record.py and there are some new test cases in test-record.t. [ original upstream message ]

tests: make hghave handle exec bit on Linux with vfat [ original upstream message ]

tests: teach hghave to actually test for symlink support [ original upstream message ]

Merge with stable

tests: fix incompatibility with python-2.4 in test-hgweb Thanks to lcantey for catching it. [ original upstream message ]

tests: extend get-with-headers to support cache testing [ original upstream message ]

pylint, pyflakes: remove unused or duplicate imports [ original upstream message ]

Merge with stable

mq: restore _branchtags() fast path (issue3223) Since a5917346c72e, mq saves the nodeid of the first applied patch to cache/branchheads, which breaks the optimized cache handling introduced in fbf8320f25c8. The problem is the revision being committed is appended to mqrepo.applied after the commit succeeds, which means mqrepo._branchtags() performs a regular update and write the first applied patch to the branch cache. One solution is to set a context variable _committingpatch on the mqrepo while it is committing a patch and to take it in account when deciding to fast-path mqrepo._branchtags(). Not really elegant but it works. The changes to test-mq-caches.t reverse changes introduced by a5917346c72e. The cache should not have been updated with mq records. The changes to test-keyword.t are indirectly caused by a5917346c72e. Reported and analyzed by Yuya Nishihara <yuya@tcha.org> Notes: - qpush still makes a slow path _branchtags() call when checking heads. Maybe this can be optimized. - be careful when merging this patch in default as secretcommit() was renamed newcommit() right after the end of the code freeze. [ original upstream message ]

tests: tighten checks for octal escapes in shell printf. printf on AIX default shell ksh (89) says \1 is an invalid escape. It insists on at least 2 digits. This causes failures in test-keyword.t and test-status.t. check-code.py already looks out for \NNN and recommends using Python for outputting octal values. Extend the check to \NN and \N and fix up resulting failures. [ original upstream message ]

Merge with stable

run-tests: expand user in --with-hg This makes it possible to run: $ ./run-tests.py --with-hg=~/hg-bin/hg [ original upstream message ]

tests: let run-tests.py default to use 'sh' in $PATH instead of '/bin/sh' This makes it easier to run tests on systems that have a usable sh in the search path but not in the standard location. [ original upstream message ]

tests: add 'set -x' to the .t sh scripts in run-tests.py debug mode This makes -d output much more readable when debugging the test framework or very strange test failures. [ original upstream message ]

Merge with default

Update filectx.cmp monkeypatch to handle '\1\n' at start of file Analogous to 012b285cf643 in mercurial main.

phases: use nodemap to check for missing nodes [ original upstream message ]

Merge with stable

tests: add htmlcov option [ original upstream message ]

run-tests: use a list comprehension instead of map [ original upstream message ]

tests: fix omit path list All directories need a trailing asterisk. Otherwise the files are not excluded from coverage. [ original upstream message ]

Merge with stable

branch: warn on branching [ orginal upstream message ]

Merge with stable

tests: use an alias to make msys 'pwd' return paths with forward slashes [ original upstream message ]

tests: skip cvs tests with msys on windows They will fail with weird 'ssh' errors. [ original upstream message ]

tests: introduce 'hghave msys' to skip tests that would fail because of msys [ original upstream message ]

Merge with default

test-keyword: use inline doctest syntax

Merge with stable

tests: skip color test on platforms without tic [ original upstream message ]

Merge with default Make tests/hgave executable on stable branch too.

Merge with stable

merge: give a special message for internal:merge failure (issue3105) [ original upstream message ]

Merge with stable

tests: use the specified shell for running old fashioned sh tests [ original upstream message ]

Merge with stable

Make hghave executable

run-tests: make $TESTTMP matching case-insensitive on windows [ original upstream message ]

run-tests: don't quote command names - that do apparently not work with msys [ original upstream message ]

tests: ignore \r on windows [ original upstream message ]

run-tests: convert windows paths to unix [ original upstream message ]

tests: make (glob) on windows accept \ instead of / Globbing is usually used for filenames, so on windows it is reasonable and very convenient that glob patterns accepts '\' or '/' when the pattern specifies '/'. [ original upstream message ]

tests: use 'hghave serve' to guard tests that requires serve daemon management [ original upstream message ]

tests: use 'hghave system-sh' to guard tests that requires sh in system() [ original upstream message ]

tests: use 'hghave no-windows' to avoid testing reserved file names on windows [ original upstream message ]

tests: use 'hghave unix-permissions' for tests that really use chmod chmod of helper scripts is not included. tests that exercise the x bit in the file system uses 'hghave execbit'. [ original upstream message ]

tests: use 'hghave symlink' for tests using symlinks [ original upstream message ]

tests: make '(esc)' matching in run-tests.py work as intended The code for match on (esc) lines didn't work, and it would thus always end up emitting another suggestion ... which however would match the old one. [ original upstream message ]

Merge with default

Add hghave test as of 5635a4017061

Merge with stable

run-tests: replace inline python handling with more native scheme Normally changes in tests are reported like this in diffs: $ cat foo - a + b Using -i mode lets us update tests when the new results are correct and/or populate tests with their output. But with the standard doctest framework, inline Python sections in tests changes instead result in a big failure report that's unhelpful. So here, we replace the doctest calls with a simple compile/eval loop. [ original upstream message ]

Merge with stable

run-tests: minor cleanups [ original upstream message ]

run-tests: pull out line matching function [ original upstream message ]

run-tests: pull out unified matching funcs [ original upstream message ]

tests: add some comments to the unified test code [ original upstream message ]

tests: rewrite inline Python support Tests with inline Python could turn '>>>' into their underlying python invocation if the test got updated with -i. [ original upstream message ]

Backout b78cce2b1430 until a proper solution is found

Merge with stable

run-tests: make sure no_proxy/NO_PROXY are empty to fix test-http-proxy.t If no_proxy (or NO_PROXY) includes localhost, the test for detecting an unreachable proxy fails, because the proxy setting is ignored. [ original upstream message ]

keyword: use util.realpath instead of os.path.realpath This makes test-keyword.t pass on Python 2.4.1 (e.g. Debian sarge) [ original upstream message ]

Merge with default

Correct grammar in iskwfile docstring

Merge with stable

rollback: avoid unsafe rollback when not at tip (issue2998) You can get into trouble if you commit, update back to an older changeset, and then rollback. The update removes your valuable changes from the working dir, then rollback removes them history. Oops: you've just irretrievably lost data running nothing but core Mercurial commands. (More subtly: rollback from a shared clone that was already at an older changeset -- no update required, just rollback from the wrong directory.) The fix assumes that only "commit" transactions have irreplaceable data, and allows rolling back non-commit transactions as always. But when rolling back a commit, check that the working dir is checked out to tip, i.e. the changeset we're about to destroy. If not, abort. You can get back the old (dangerous) behaviour with --force. [ original upstream message ]

Merge with stable

run-tests: end doctest block when seeing a non-command [ original upstream message ]

Merge with stable

tests: add support for inline doctests in test files This adds doctest like syntax to .t files, that can be interleaved with regular shell code: $ echo -n a > file >>> print open('file').read() a >>> open('file', 'a').write('b') $ cat file ab The syntax is exactly the same as regular doctests, so multiline statements look like this: >>> for i in range(3): ... print i 0 1 2 Each block has its own context, i.e.: >>> x = 0 >>> print x 0 $ echo 'foo' foo >>> print x will result in a NameError. Errors are displayed in standard doctest format: >>> print 'foo' bar --- /home/idan/dev/hg/default/tests/test-test.t +++ /home/idan/dev/hg/default/tests/test-test.t.err @@ -2,3 +2,16 @@ > >>> print 'foo' > bar > EOF + ********************************************************************** + File "/tmp/tmps8X_0ohg-tst", line 1, in tmps8X_0ohg-tst + Failed example: + print 'foo' + Expected: + bar + Got: + foo + ********************************************************************** + 1 items had failures: + 1 of 1 in tmps8X_0ohg-tst + ***Test Failed*** 1 failures. + [1] As for the implementation, it's quite simple: when the test runner sees a line starting with '>>>' it converts it, and all subsequent lines until the next line that begins with '$' to a 'python -m heredoctest <<EOF' call with the proper heredoc to follow. So if we have this test file: >>> for c in 'abcd': ... print c a b c d $ echo foo foo It gets converted to: $ python -m heredoctest <<EOF > >>> for c in 'abcd': > ... print c > a > b > c > d > EOF $ echo foo foo And then processed like every other test file by converting it to a sh script. [ original upstream message ]

Merge with stable

import: wrap a transaction around the whole command Now 'rollback' after 'import' is less surprising: it rolls back all of the imported changesets, not just the last one. As an extra added benefit, you don't need 'rollback -f' after 'import --bypass', which was an undesired side effect of fixing issue2998 (59e8bc22506e).. Note that this is a different take on issue963, which complained that rollback after importing multiple patches returned the working dir parent to the starting point, not to the second-last patch applied. Since we now rollback the entire import, returning the working dir to the starting point is entirely logical. So this change also undoes a732eebf1958, the fix to issue963, and updates its tests accordingly. Bottom line: rollback after import was weird before issue963, understandable since the fix for issue963, and even better now. [ original upstream message ]

(0.9.2compat) merge with default Adapt preserving filemode. Fix a typo. Clean up last merge.

Merge with default

Make status test after record and kwexpand/kwshrink reliable This guarantees test failure when the dirstate code is omitted at the end of the kwtemplater.overwrite method. kwexpand/kwshrink: Without a 1 second wait the test succeeds sometimes, even when the dirstate of the overwritten file is not forced to normal. record: status after recording an added file allows to check whether normallookup is needed after overwriting.

Preserve file mode when overwriting

Merge with default

Avoid x = a and b or c

Merge with stable

tests: use getattr instead of hasattr [ original upstream message ]

Merge with stable

run-tests: fix summary when accepting changes interactively Accepted changes were not counted as success. [ original upstream message ]

Merge with default

Reuse already present working contexts for match Shortens overlong line as side-effect.

Merge with stable

run-test: revert most of 439ed4721a6d, timeout uses fallback for terminate() [ original upstream message ]

run-tests: fallback to SIGTERM if subprocess.Popen does not have terminate() [ original upstream message ]

Merge with stable

scmutil: switch match users to supplying contexts The most appropriate context is not always clearly defined. The obvious cases: For working directory commands, we use None For commands (eg annotate) with single revs, we use that revision The less obvious cases: For commands (eg status, diff) with a pair of revs, we use the second revision For commands that take a range (like log), we use None [ original upstream message ]

Merge with stable

run-tests: verbose log ignored test [ original upstream message ]

Merge with stable

patch: generalize the use of patchmeta in applydiff() - Add patchmeta.copy() and emit copies from iterhunks. Modifying patchmeta instances in applydiff() makes things simpler. - Rename selectfile() into makepatchmeta(). It is responsible for creating patchmeta for regular patches. - Pass patchmeta objects to patchfile() directly patchmeta instances were associated with git patches, for regular patches we had to pass additional variables to tell the patch intent to patchfile(). Instead, we generate patchmeta for regular patches and pass them. This will also help with patch filtering by matcher objects. [ original upstream message ]

Merge with stable

run-tests: allow whitelisting tests that should always run It's desirable to run some tests all the time, for example test-check-pyflakes.t and test-check-code-hg.py. This allows passing --whitelist as a path to a file (flag can be specified more than once) which contains a list of files to whitelist. Whitelisted tests are run even if they're blacklisted or wouldn't match a --keyword test run. For example, to do a quick test of usehttp2, one can now do $ cat > test-whitelist <<EOF > test-check-pyflakes.t > test-check-code-hg.py > EOF $ (cd tests && ./run-tests.py --extra-config-opt 'ui.usehttp2=true' > -k http -j 8 --whitelist test-whitelist) and have all http-specific tests run as well as the two code linters. [ original upstream message ]

Merge with stable

run-tests: fix --blacklist (broken by 95715c2f90bf) [ original upstream message ]

Merge with stable

patch: use temporary files to handle intermediate copies git patches may require copies to be handled out-of-order. For instance, take the following sequence: * modify a * copy a into b Here, we have to generate b from a before its modification. To do so, applydiff() was scanning for copy metadata and performing the copies before processing the other changes in-order. While smart and efficient, this approach complicates things by handling file copies and file creations at different places and times. While a new file must not exist before being patched a copied file already exists before applying the first hunk. Instead of copying the files at their final destination before patching, we store them in a temporary file location and retrieve them when patching. The filestore always stores file content in real files but nothing prevents adding a cache layer. The filestore class was kept separate from fsbackend for at least two reasons: - This class is likely to be reused as a temporary result store for a future repository patching call (entries just have to be extended to contain copy sources). - Delegating this role to backends might be more efficient in a repository backend case: the source files are already available in the repository itself and do not need to be copied again. It also means that third-parties backend would have to implement two other methods. If we ever decide to merge the filestore feature into backend, a minimalistic approach would be to compose with filestore directly. Keep in mind this copy overhead only applies for copy/rename sources, and may even be reduced to copy sources which have to handled ahead of time. [ original upstream message ]

patch: refactor file creation/removal detection The patcher has to know if a file is being created or removed to check if the target already exists, or to actually unlink the file when a hunk emptying it is applied. This was done by embedding the creation/removal information in the first (and only) hunk attached to the file. There are two problems with this approach: - creation/removal is really a property of the file being patched and not its hunk. - for regular patches, file creation cannot be deduced at parsing time: there are case where the *stripped* file paths must be compared. Modifying hunks after their creation is clumsy and prevent further refactorings related to copies handling. Instead, we delegate this job to selectfile() which has all the relevant information, and remove the hunk createfile() and rmfile() methods. [ original upstream message ]

run-tests: fix --blacklist with jobs > 1 filter blacklisted tests before partitioning them to the children. maintains the 'Skipped...' output but not the 's'. [ original upstream message ]

run-tests: slightly simplify blacklist check [ original upstream message ]

Merge with stable

patch: set desired mode when patching, not in updatedir() This patch and the following aim at merging _updatedir() actions into _applydiff(). [ original upstream message ]

Merge with stable

run-tests: print a newline after all warnings [ original upstream message ]

Merge with stable

patch: extract fs access from patchfile into fsbackend Most filesystem calls are already isolated in patchfile but this is not enough: renames are performed before patchfile is available and some chmod calls are even done outside of the applydiff call. Once all these calls are extracted into a backend class, we can provide cleaner APIs to write to a working directory context directly into the repository. [ original upstream message ]

Merge with stable

run-tests: replace chdir() with Popen cwd option [ original upstream message ]

run-tests: make --debug run in the temporary test directory [ original upstream message ]