Thu, 13 Feb 2014 08:26:13 +0100 run-tests: add possibility for test-runners to report a "warned" test result stable
Simon Heimberg <simohe@besonet.ch> [Thu, 13 Feb 2014 08:26:13 +0100] rev 1338
run-tests: add possibility for test-runners to report a "warned" test result A test result is recognized as "warned" when the test runner returns the exit code False. (False is similar to 0, which is reporting a command has run sucessfully.) The only difference in display is that the failure message while running writes "Warning:" instead of "ERROR:". The diff output is the same as when the test fails. Runing "run-tests.py -i" asks to accept the changed result also for tests reported as "warned". When running tests, a "warned" test would look like this: .. --- xxxx\tests\test-something.t +++ xxxx\tests\test-something.t.err @@ -1279,7 +1279,7 @@ $ echo anything $ hg commit -S -m whatever committing subrepository s - committing subrepository s/sbs + committing subrepository s/sbs (glob) warning: something happened committing subrepository t $ echo something Warning: xxxx\tests\test-sOMETHING.t output changed ~.s...s...s.. Reporting a test result as "warned" will be used in following patches. [ original upstream message ]
Thu, 13 Feb 2014 08:17:39 +0100 run-tests: separate exit code when no failed tests but warned ones stable
Simon Heimberg <simohe@besonet.ch> [Thu, 13 Feb 2014 08:17:39 +0100] rev 1337
run-tests: separate exit code when no failed tests but warned ones This can be used by buildbot to set the result "warnings" instead of "failed". [ original upstream message ]
Thu, 13 Feb 2014 08:14:54 +0100 run-tests: introduce 'warned' as test result stable
Simon Heimberg <simohe@besonet.ch> [Thu, 13 Feb 2014 08:14:54 +0100] rev 1336
run-tests: introduce 'warned' as test result While running, a test resulting in 'warned' is shown as '~'. Test results with state warned are listed between the skipped and the failed tests. Example: Skipped test-revert-flags.t: missing feature: executable bit Skipped test-inotify-lookup.t: missing feature: inotify extension support Warned test-something.t: output changed Failed test-largefiles.t: output changed Failed test-subrepo.t: output changed # Ran 11 tests, 2 skipped, 1 warned, 2 failed. The test result "warned" will be used in later patches. [ original upstream message ]
Thu, 13 Feb 2014 08:02:06 +0100 run-tests: handle sys.exit in main function stable
Simon Heimberg <simohe@besonet.ch> [Thu, 13 Feb 2014 08:02:06 +0100] rev 1335
run-tests: handle sys.exit in main function [ original upstream message ]
Thu, 13 Feb 2014 07:29:28 +0100 run-tests: remove unnecessary variable initialisation stable
Simon Heimberg <simohe@besonet.ch> [Thu, 13 Feb 2014 07:29:28 +0100] rev 1334
run-tests: remove unnecessary variable initialisation ret is always set before it is used, so remove ret = 0 [ original upstream message ]
Fri, 14 Feb 2014 09:52:13 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Fri, 14 Feb 2014 09:52:13 +0100] rev 1333
Merge with stable
Wed, 12 Feb 2014 16:09:18 +0100 tests: killdaemons.py for windows distinguishes access violation and terminated stable
Simon Heimberg <simohe@besonet.ch> [Wed, 12 Feb 2014 16:09:18 +0100] rev 1332
tests: killdaemons.py for windows distinguishes access violation and terminated To distinguish between access violaition (process belonging to another user) and a terminated process, PROCESS_QUERY_INFORMATION must be enabled. But TerminateProcess still raises error 5 in both cases. Therefore check before if the process has already terminated. [ original upstream message ]
Wed, 12 Feb 2014 15:38:59 +0100 tests: killdaemons.py for checks reason when getting no process handle stable
Simon Heimberg <simohe@besonet.ch> [Wed, 12 Feb 2014 15:38:59 +0100] rev 1331
tests: killdaemons.py for checks reason when getting no process handle [ original upstream message ]
Fri, 17 Jan 2014 21:13:20 +0100 tests: killdaemons.py for windows waits for killed process to terminate stable
Simon Heimberg <simohe@besonet.ch> [Fri, 17 Jan 2014 21:13:20 +0100] rev 1330
tests: killdaemons.py for windows waits for killed process to terminate After kill, wait for the process to terminate. When it does not in time, write a debug message similar as in other os. But no 2nd forceful attempt is done. [ original upstream message ]
Fri, 17 Jan 2014 21:13:08 +0100 tests: kill for windows in killdaemons.py checks return values stable
Simon Heimberg <simohe@besonet.ch> [Fri, 17 Jan 2014 21:13:08 +0100] rev 1329
tests: kill for windows in killdaemons.py checks return values The return values of the windll calls are checked and when an error is indicated, it is raised. The handle is still closed properly. [ original upstream message ]
Tue, 11 Feb 2014 22:50:56 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Tue, 11 Feb 2014 22:50:56 +0100] rev 1328
Merge with stable
Tue, 11 Feb 2014 01:15:07 +0100 run-tests: fix typo and print out failing line stable
Simon Heimberg <simohe@besonet.ch> [Tue, 11 Feb 2014 01:15:07 +0100] rev 1327
run-tests: fix typo and print out failing line Instead of stripping the newline and printing the line, only the newline was printed. The output on buildbot will make more sense now. [ original upstream message ]
Mon, 10 Feb 2014 14:08:42 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Mon, 10 Feb 2014 14:08:42 +0100] rev 1326
Merge with stable
Wed, 05 Feb 2014 01:37:37 +0100 tests: ignore http tests that are known wontfix failures on python 2.4 stable
Mads Kiilerich <madski@unity3d.com> [Wed, 05 Feb 2014 01:37:37 +0100] rev 1325
tests: ignore http tests that are known wontfix failures on python 2.4 As mentioned on http://bz.selenic.com/show_bug.cgi?id=2739#c17 , b3083042bdda left test-http.t failing on Python < 2.4.3. That has not been noticed because most 2.4 testing has been done with a patched 2.4.2. This makes sure that the tests only are run for Python >= 2.4.3. That makes it possible to verify that everything else works with Python 2.4. [ original upstream message ]
Tue, 04 Feb 2014 00:22:20 +0100 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Tue, 04 Feb 2014 00:22:20 +0100] rev 1324
Merge with stable
Mon, 20 Jan 2014 01:29:54 +0100 tests: 'hghave tic' also requires curses support in Python stable
Mads Kiilerich <madski@unity3d.com> [Mon, 20 Jan 2014 01:29:54 +0100] rev 1323
tests: 'hghave tic' also requires curses support in Python test-status-color.t would fail when using a Python without curses. [ original upstream message ]
Fri, 17 Jan 2014 15:32:21 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Fri, 17 Jan 2014 15:32:21 +0000] rev 1322
Merge with stable
Thu, 16 Jan 2014 12:08:57 +0100 run-tests: print more information on unnecessary glob matching stable
Simon Heimberg <simohe@besonet.ch> [Thu, 16 Jan 2014 12:08:57 +0100] rev 1321
run-tests: print more information on unnecessary glob matching Extend the message with the test name and the approximate line number. (The line number is the one of the command producing the output.) Finding the line to fix is easier now. old message: ...... Info, unnecessary glob: at a/b/c (glob) .. new message: ...... Info, unnecessary glob in test-example.t (after line 9): at a/b/c (glob) .. The test result is still pass as before. [ original upstream message ]
Thu, 16 Jan 2014 12:08:29 +0100 run-tests: suggest to append glob when only path sep does not match stable
Simon Heimberg <simohe@besonet.ch> [Thu, 16 Jan 2014 12:08:29 +0100] rev 1320
run-tests: suggest to append glob when only path sep does not match When the line does not match because of \ instead of / (on windows), append (glob) in the expected output. This allows to rename test-bla.t.err to test-bla.t for getting a correct output. This worked for other failures like missing (esc), but not here. Output example (only +- lines of diff): Before: - path/with/local/sep + path\\with\\local/sep Now: - path/with/local/sep + path/with/local/sep (glob) [ original upstream message ]
Thu, 16 Jan 2014 12:06:49 +0100 run-tests: test each line matching function on its own stable
Simon Heimberg <simohe@besonet.ch> [Thu, 16 Jan 2014 12:06:49 +0100] rev 1319
run-tests: test each line matching function on its own This has several advantages. * Each match function can return some information to the caller runone (used in the next patch). * It is not checked that the line ends in " (glob)" when rematch() returns false. * And it looks more readable. [ original upstream message ]
Thu, 16 Jan 2014 11:26:54 +0100 run-tests: set the thread name to the test name for info on error stable
Simon Heimberg <simohe@besonet.ch> [Thu, 16 Jan 2014 11:26:54 +0100] rev 1318
run-tests: set the thread name to the test name for info on error This does not happen when running normal. But when fiddling around with the test infrastructure, this helps a lot. Old traceback messge Exception in thread Thread-7: Traceback (most recent call last): ... new traceback message Exception in thread test-something.t: Traceback (most recent call last): ... [ original upstream message ]
Thu, 16 Jan 2014 18:55:35 +0100 run-tests: report tests as failed when run-test raises an error stable
Simon Heimberg <simohe@besonet.ch> [Thu, 16 Jan 2014 18:55:35 +0100] rev 1317
run-tests: report tests as failed when run-test raises an error Before no message was returned to the main thread. No result was registered and no new thread was started. This does not happen when running normal. But when fiddling around with the test infrastructure, this helps a lot. [ original upstream message ]
Tue, 07 Jan 2014 22:29:39 +0100 cleanup: Remove the only ever used skip-check-code pragma stable
Simon Heimberg <simohe@besonet.ch> [Tue, 07 Jan 2014 22:29:39 +0100] rev 1316
cleanup: Remove the only ever used skip-check-code pragma Use the work-around suggested by the rule instead [ original upstream message ]
Wed, 06 Nov 2013 18:19:04 -0500 pathutil: tease out a new library to break an import cycle from canonpath use stable
Augie Fackler <raf@durin42.com> [Wed, 06 Nov 2013 18:19:04 -0500] rev 1315
pathutil: tease out a new library to break an import cycle from canonpath use [ original upstream message ]
Tue, 14 Jan 2014 15:51:15 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Tue, 14 Jan 2014 15:51:15 +0000] rev 1314
Merge with stable
Mon, 25 Nov 2013 22:00:46 +0100 run-tests: better check for python version stable
Simon Heimberg <simohe@besonet.ch> [Mon, 25 Nov 2013 22:00:46 +0100] rev 1313
run-tests: better check for python version Compare version by using pythons tuple comparison. So we do not match on python 3.0 or newer. [ original upstream message ]
Thu, 28 Nov 2013 12:59:05 +0000 Merge with stable
Christian Ebert <blacktrash@gmx.net> [Thu, 28 Nov 2013 12:59:05 +0000] rev 1312
Merge with stable
Sat, 23 Nov 2013 01:06:20 +0100 tests: fix `hghave root` on windows stable
Simon Heimberg <simohe@besonet.ch> [Sat, 23 Nov 2013 01:06:20 +0100] rev 1311
tests: fix `hghave root` on windows This lets tests\test-hghave.t pass on windows where geteuid does not exist. [ original upstream message ]
Thu, 28 Nov 2013 12:57:12 +0000 Merge with default stable
Christian Ebert <blacktrash@gmx.net> [Thu, 28 Nov 2013 12:57:12 +0000] rev 1310
Merge with default
Wed, 20 Nov 2013 12:55:08 +0000 wlock while setting branch in kwdemo
Christian Ebert <blacktrash@gmx.net> [Wed, 20 Nov 2013 12:55:08 +0000] rev 1309
wlock while setting branch in kwdemo
(0) -1000 -300 -100 -50 -30 +30 tip