Simon Heimberg <simohe@besonet.ch> [Thu, 13 Feb 2014 08:02:06 +0100] rev 1335
run-tests: handle sys.exit in main function
[ original upstream message ]
Simon Heimberg <simohe@besonet.ch> [Thu, 13 Feb 2014 07:29:28 +0100] rev 1334
run-tests: remove unnecessary variable initialisation
ret is always set before it is used, so remove ret = 0
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Fri, 14 Feb 2014 09:52:13 +0100] rev 1333
Merge with stable
Simon Heimberg <simohe@besonet.ch> [Wed, 12 Feb 2014 16:09:18 +0100] rev 1332
tests: killdaemons.py for windows distinguishes access violation and terminated
To distinguish between access violaition (process belonging to another user)
and a terminated process, PROCESS_QUERY_INFORMATION must be enabled. But
TerminateProcess still raises error 5 in both cases. Therefore check before if
the process has already terminated.
[ original upstream message ]
Simon Heimberg <simohe@besonet.ch> [Wed, 12 Feb 2014 15:38:59 +0100] rev 1331
tests: killdaemons.py for checks reason when getting no process handle
[ original upstream message ]
Simon Heimberg <simohe@besonet.ch> [Fri, 17 Jan 2014 21:13:20 +0100] rev 1330
tests: killdaemons.py for windows waits for killed process to terminate
After kill, wait for the process to terminate. When it does not in time,
write a debug message similar as in other os. But no 2nd forceful attempt
is done.
[ original upstream message ]
Simon Heimberg <simohe@besonet.ch> [Fri, 17 Jan 2014 21:13:08 +0100] rev 1329
tests: kill for windows in killdaemons.py checks return values
The return values of the windll calls are checked and when an error is
indicated, it is raised. The handle is still closed properly.
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Tue, 11 Feb 2014 22:50:56 +0100] rev 1328
Merge with stable
Simon Heimberg <simohe@besonet.ch> [Tue, 11 Feb 2014 01:15:07 +0100] rev 1327
run-tests: fix typo and print out failing line
Instead of stripping the newline and printing the line, only the newline was
printed.
The output on buildbot will make more sense now.
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Mon, 10 Feb 2014 14:08:42 +0100] rev 1326
Merge with stable
Mads Kiilerich <madski@unity3d.com> [Wed, 05 Feb 2014 01:37:37 +0100] rev 1325
tests: ignore http tests that are known wontfix failures on python 2.4
As mentioned on http://bz.selenic.com/show_bug.cgi?id=2739#c17 , b3083042bdda
left test-http.t failing on Python < 2.4.3. That has not been noticed because
most 2.4 testing has been done with a patched 2.4.2.
This makes sure that the tests only are run for Python >= 2.4.3. That makes it
possible to verify that everything else works with Python 2.4.
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Tue, 04 Feb 2014 00:22:20 +0100] rev 1324
Merge with stable
Mads Kiilerich <madski@unity3d.com> [Mon, 20 Jan 2014 01:29:54 +0100] rev 1323
tests: 'hghave tic' also requires curses support in Python
test-status-color.t would fail when using a Python without curses.
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Fri, 17 Jan 2014 15:32:21 +0000] rev 1322
Merge with stable
Simon Heimberg <simohe@besonet.ch> [Thu, 16 Jan 2014 12:08:57 +0100] rev 1321
run-tests: print more information on unnecessary glob matching
Extend the message with the test name and the approximate line number. (The
line number is the one of the command producing the output.)
Finding the line to fix is easier now.
old message:
......
Info, unnecessary glob: at a/b/c (glob)
..
new message:
......
Info, unnecessary glob in test-example.t (after line 9): at a/b/c (glob)
..
The test result is still pass as before.
[ original upstream message ]
Simon Heimberg <simohe@besonet.ch> [Thu, 16 Jan 2014 12:08:29 +0100] rev 1320
run-tests: suggest to append glob when only path sep does not match
When the line does not match because of \ instead of / (on windows), append
(glob) in the expected output.
This allows to rename test-bla.t.err to test-bla.t for getting a correct
output. This worked for other failures like missing (esc), but not here.
Output example (only +- lines of diff):
Before:
- path/with/local/sep
+ path\\with\\local/sep
Now:
- path/with/local/sep
+ path/with/local/sep (glob)
[ original upstream message ]
Simon Heimberg <simohe@besonet.ch> [Thu, 16 Jan 2014 12:06:49 +0100] rev 1319
run-tests: test each line matching function on its own
This has several advantages.
* Each match function can return some information to the caller runone (used in
the next patch).
* It is not checked that the line ends in " (glob)" when rematch() returns
false.
* And it looks more readable.
[ original upstream message ]
Simon Heimberg <simohe@besonet.ch> [Thu, 16 Jan 2014 11:26:54 +0100] rev 1318
run-tests: set the thread name to the test name for info on error
This does not happen when running normal. But when fiddling around with
the test infrastructure, this helps a lot.
Old traceback messge
Exception in thread Thread-7:
Traceback (most recent call last):
...
new traceback message
Exception in thread test-something.t:
Traceback (most recent call last):
...
[ original upstream message ]
Simon Heimberg <simohe@besonet.ch> [Thu, 16 Jan 2014 18:55:35 +0100] rev 1317
run-tests: report tests as failed when run-test raises an error
Before no message was returned to the main thread. No result was registered
and no new thread was started.
This does not happen when running normal. But when fiddling around with
the test infrastructure, this helps a lot.
[ original upstream message ]
Simon Heimberg <simohe@besonet.ch> [Tue, 07 Jan 2014 22:29:39 +0100] rev 1316
cleanup: Remove the only ever used skip-check-code pragma
Use the work-around suggested by the rule instead
[ original upstream message ]
Augie Fackler <raf@durin42.com> [Wed, 06 Nov 2013 18:19:04 -0500] rev 1315
pathutil: tease out a new library to break an import cycle from canonpath use
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Tue, 14 Jan 2014 15:51:15 +0000] rev 1314
Merge with stable
Simon Heimberg <simohe@besonet.ch> [Mon, 25 Nov 2013 22:00:46 +0100] rev 1313
run-tests: better check for python version
Compare version by using pythons tuple comparison. So we do not match on python
3.0 or newer.
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Thu, 28 Nov 2013 12:59:05 +0000] rev 1312
Merge with stable
Simon Heimberg <simohe@besonet.ch> [Sat, 23 Nov 2013 01:06:20 +0100] rev 1311
tests: fix `hghave root` on windows
This lets tests\test-hghave.t pass on windows where geteuid does not exist.
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Thu, 28 Nov 2013 12:57:12 +0000] rev 1310
Merge with default
Christian Ebert <blacktrash@gmx.net> [Wed, 20 Nov 2013 12:55:08 +0000] rev 1309
wlock while setting branch in kwdemo
Christian Ebert <blacktrash@gmx.net> [Wed, 20 Nov 2013 12:26:54 +0000] rev 1308
Merge with stable
Mads Kiilerich <madski@unity3d.com> [Sun, 17 Nov 2013 10:59:35 -0500] rev 1307
tests: python hash seed is only relevant after failures - otherwise keep quiet
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Sun, 17 Nov 2013 17:30:23 +0000] rev 1306
Merge with stable
Sean Farley <sean.michael.farley@gmail.com> [Fri, 15 Nov 2013 22:57:11 -0500] rev 1305
run-tests: remove files that we potentially create outside of $TMPDIR
[ original upstream message ]
Sean Farley <sean.michael.farley@gmail.com> [Fri, 15 Nov 2013 22:56:08 -0500] rev 1304
run-tests: remove code that creates a dummy 'diffstat'
This was introduced in fb1d7a42663c for an old test that is no longer the same.
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Thu, 14 Nov 2013 18:07:43 -0600] rev 1303
tests: skip tests that require not having root (issue4089)
This adds a new root hghave to test against. Almost all of these are a
subset of unix-permissions, but that is also used for checking exec
bit handling.
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Fri, 01 Nov 2013 17:14:49 +0000] rev 1302
Merge with stable
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Sat, 05 Oct 2013 01:02:22 +0900] rev 1301
hghave: add "py3k" feature to check whether test runs with Python 3.x
This patch adds "py3k" feature to check whether test runs with Python
3.x.
This check is needed for portability of test code: for example, in the
default, modules are imported relatively first with python 2.x, but
imported absolutely with Python 3.x.
[ original upstream message ]
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Sat, 05 Oct 2013 01:02:22 +0900] rev 1300
hghave: add "absimport" feature to check "absolute_import" in __future__
This patch adds "absimport" feature to check whether "absolute_import"
exists in __future__, which means supporting module loading by
absolute name.
This check is needed for portability of test code using
"absolute_import", because Python earlier than 2.5 doesn't support it.
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Mon, 07 Oct 2013 13:51:33 +0100] rev 1299
Merge with stable
Mads Kiilerich <madski@unity3d.com> [Thu, 03 Oct 2013 14:50:47 +0200] rev 1298
run-tests: place the .t shell script next to $TESTTMP and with a useful name
--keep can thus keep it around - very convenient for debugging.
[ original upstream message ]
Javi Merino <cibervicho@gmail.com> [Wed, 02 Oct 2013 22:46:32 +0100] rev 1297
get-with-headers: don't block indefinitely if the server had an internal error
If the server had an internal error and returned 500, there's nothing
to read, so "response.read()" blocks indefinitely. Only output the
response if there's really a response.
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Wed, 02 Oct 2013 01:22:11 +0100] rev 1296
Merge with stable
David Soria Parra <dsp@experimentalworks.net> [Thu, 29 Aug 2013 09:22:13 -0700] rev 1295
shelve: add a shelve extension to save/restore working changes
This extension saves shelved changes using a temporary draft commit,
and bundles the temporary commit and its draft ancestors, then
strips them.
This strategy makes it possible to use Mercurial's bundle and merge
machinery to resolve conflicts if necessary when unshelving, even
when the destination commit or its ancestors have been amended,
squashed, or evolved. (Once a change has been unshelved, its
associated unbundled commits are either rolled back or stripped.)
Storing the shelved change as a bundle also avoids the difficulty
that hidden commits would cause, of making it impossible to amend
the parent if it is a draft commits (a common scenario).
Although this extension shares its name and some functionality with
the third party hgshelve extension, it has little else in common.
Notably, the hgshelve extension shelves changes as unified diffs,
which makes conflict resolution a matter of finding .rej files and
conflict markers, and cleaning up the mess by hand.
We do not yet allow hunk-level choosing of changes to record.
Compared to the hgshelve extension, this is a small regression in
usability, but we hope to integrate that at a later point, once the
record machinery becomes more reusable and robust.
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Tue, 24 Sep 2013 03:12:59 +0100] rev 1294
Merge with stable
Augie Fackler <raf@durin42.com> [Thu, 19 Sep 2013 15:29:28 -0400] rev 1293
run-tests: find mercurial path with syntax valid on both py2 and py3
[ original upstream message ]
Augie Fackler <raf@durin42.com> [Thu, 19 Sep 2013 15:29:04 -0400] rev 1292
run-tests: if run by python3, execute setup.py with --c2to3
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Mon, 05 Aug 2013 13:19:38 +0100] rev 1291
Merge with stable
Simon Heimberg <simohe@besonet.ch> [Fri, 26 Jul 2013 21:18:40 -0400] rev 1290
run-tests: only check the common criteria once per test
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Thu, 18 Jul 2013 23:22:59 -0500] rev 1289
run-tests: backout 4f32747879d1 line endings change
It made the windows buildbot sad.
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Fri, 19 Jul 2013 00:37:26 +0100] rev 1288
Merge with stable
Brendan Cully <brendan@kublai.com> [Thu, 18 Jul 2013 09:42:44 -0700] rev 1287
run-tests: revert previous commit, run() waits after a timeout
[ original upstream message ]
Brendan Cully <brendan@kublai.com> [Thu, 18 Jul 2013 09:39:01 -0700] rev 1286
run-tests: reap timed-out zombies
[ original upstream message ]
Simon Heimberg <simohe@besonet.ch> [Sat, 13 Jul 2013 23:58:01 +0200] rev 1285
run-tests: generally handle line endings on windows by re
Recently this regexp was only appended when running a python test. When running
a tsttest there was a separate handling for each line type. Simplify and unify
this.
[ original upstream message ]
Simon Heimberg <simohe@besonet.ch> [Sat, 13 Jul 2013 23:57:55 +0200] rev 1284
run-tests: test for os.altsep instead of os.name when checking \ for /
This tells more explicitly what it is about
[ original upstream message ]
Brendan Cully <brendan@kublai.com> [Wed, 17 Jul 2013 13:42:08 -0700] rev 1283
run-tests: replace popen locking with a noop _cleanup handler on py24
This also avoids the race condition, and isn't detrimental to job scheduling.
[ original upstream message ]
Brendan Cully <brendan@kublai.com> [Wed, 17 Jul 2013 13:02:12 -0700] rev 1282
run-tests: only lock Popen wait/poll on python 2.4
It can cause scheduling bubbles and is not necessary on newer pythons.
[ original upstream message ]
Brendan Cully <brendan@kublai.com> [Wed, 17 Jul 2013 12:45:12 -0700] rev 1281
run-tests: lock popen wait/poll
In python2.4, any call to Popen() may attempt to wait on any active
process, and wait is not thread-safe. Make it thread-safe.
See http://bugs.python.org/issue1731717 for details.
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Tue, 16 Jul 2013 12:44:11 -0500] rev 1280
run-tests: patch over py2.4 proc.wait() race
[ original upstream message ]
Simon Heimberg <simohe@besonet.ch> [Mon, 01 Jul 2013 20:48:56 +0200] rev 1279
cleanup: drop unused variables and an unused import
[ original upstream message ]
Jim Hague <jim.hague@acm.org> [Tue, 30 Apr 2013 14:56:33 +0100] rev 1278
tests: AIX can't handle negative date in test-dirstate.t
test-dirstate.t fails on AIX in the absurd date test. AIX touch errors on
any date prior to 1970. AIX mktime() gives an error on such dates, so the
problem is deeper than touch and attempts to work around touch in Python
failed.
Give up. Add an AIX test to hghave and skip the absurd date test on AIX.
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Mon, 01 Jul 2013 14:19:04 +0100] rev 1277
Merge with stable
Simon Heimberg <simohe@besonet.ch> [Thu, 13 Jun 2013 01:36:58 +0200] rev 1276
cleanup: remove unused imports
detected by pyflakes
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Thu, 13 Jun 2013 19:37:59 +0100] rev 1275
Merge with stable
simon@laptop-tosh [Tue, 11 Jun 2013 23:39:48 +0200] rev 1274
run-tests: sort missing files first instead of raising an error
sort first for early telling typos in test names
[ original upstream message ]
simon@laptop-tosh [Sun, 09 Jun 2013 16:49:08 +0200] rev 1273
run-tests: call Threads constructor with keyword arguments
This is suggested in the python documentation
(on http://docs.python.org/2/library/threading.html#thread-objects)
[ original upstream message ]
simon@laptop-tosh [Sun, 09 Jun 2013 16:42:55 +0200] rev 1272
run-tests: ignoring tests works again
running with --retest did not work anymore because runone still returned None
for this case. But this is not allowed since 6a127fa5de23.
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Sat, 08 Jun 2013 13:46:05 +0100] rev 1271
Merge with stable
Matt Mackall <mpm@selenic.com> [Fri, 07 Jun 2013 16:04:11 -0500] rev 1270
run-tests: simplify interrupted message
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Fri, 07 Jun 2013 15:58:14 -0500] rev 1269
run-tests: remove spurious disable of --time with --debug
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Fri, 07 Jun 2013 15:56:16 -0500] rev 1268
run-tests: always gather runtimes
[ original upstream message ]
Simon Heimberg <simohe@besonet.ch> [Wed, 05 Jun 2013 22:05:29 +0200] rev 1267
run-tests: when interrupted report time in failure message
When --time is specified, the interruption message of an interrupted test is
extended with the time the test has run
INTERRUPTED: /path/to/tests/test-example.t (after 513 seconds)
[ original upstream message ]
Simon Heimberg <simohe@besonet.ch> [Wed, 05 Jun 2013 22:05:02 +0200] rev 1266
run-tests: report interrupted tests
When the test run is aborted, a message is printed for each interrupted test.
This is helpful when a test is hanging.
example failure message:
INTERRUPTED: /path/to/tests/test-example.t
The message can appear before or after the line with the number of tests
[ original upstream message ]
Simon Heimberg <simohe@besonet.ch> [Wed, 05 Jun 2013 22:42:43 +0200] rev 1265
run-tests: open hgrc file only for writing
The file is not read here. Opening with "w+" is unnecessary.
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Thu, 06 Jun 2013 22:36:18 +0100] rev 1264
Merge with stable
Matt Mackall <mpm@selenic.com> [Thu, 06 Jun 2013 14:40:26 -0500] rev 1263
run-tests: make --noskips work
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Mon, 03 Jun 2013 09:59:32 +0100] rev 1262
Merge with stable
Matt Mackall <mpm@selenic.com> [Sun, 02 Jun 2013 18:09:06 -0500] rev 1261
run-tests: add --loop support
This makes it easy to run tests repeatedly at high loads to look for test failures.
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Sun, 02 Jun 2013 17:58:51 -0500] rev 1260
run-tests: --interactive and --jobs no longer conflict
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Sun, 02 Jun 2013 17:58:49 -0500] rev 1259
run-tests: sort certain slow tests earlier by keyword
There are a few tests that evade the size heuristic
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Sun, 02 Jun 2013 17:57:37 -0500] rev 1258
run-tests: drop unused resultslock
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Sun, 02 Jun 2013 17:57:36 -0500] rev 1257
run-tests: drop options.child and users
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Sun, 02 Jun 2013 17:56:53 -0500] rev 1256
run-tests: remove runchildren, now unused
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Sun, 02 Jun 2013 17:56:51 -0500] rev 1255
run-tests: schedule largest tests first
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Sun, 02 Jun 2013 16:58:22 -0500] rev 1254
run-tests: introduce thread scheduler
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Sun, 02 Jun 2013 16:55:19 -0500] rev 1253
run-tests: use count to calculate port to use
This will keep threads from using the same server ports
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Sun, 02 Jun 2013 16:38:15 -0500] rev 1252
run-tests: introduce threadtmp directory
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Sun, 02 Jun 2013 16:29:35 -0500] rev 1251
run-tests: add abort flag
This will be used to help threads clean up gracefully
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Sun, 02 Jun 2013 16:29:22 -0500] rev 1250
run-tests: move more variables to env
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Sun, 02 Jun 2013 16:29:20 -0500] rev 1249
run-tests: simplify env deletion
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Sun, 02 Jun 2013 16:22:51 -0500] rev 1248
run-tests: move most of remaining environment tweaks
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Sun, 02 Jun 2013 16:22:51 -0500] rev 1247
run-tests: move environment creation to a separate function
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Sun, 02 Jun 2013 16:22:51 -0500] rev 1246
run-tests: move HGRCPATH to env
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Sun, 02 Jun 2013 16:22:51 -0500] rev 1245
run-tests: move DAEMON_PIDS to env
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Sun, 02 Jun 2013 16:22:34 -0500] rev 1244
run-tests: move HGPORT setting to env
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Sun, 02 Jun 2013 15:33:41 -0500] rev 1243
run-tests: write tmp paths into env copy
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Sun, 02 Jun 2013 14:04:55 -0500] rev 1242
run-tests: use env dict to kill daemons
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Sun, 02 Jun 2013 13:45:08 -0500] rev 1241
run-tests: add env dict to isolate test environment
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Mon, 27 May 2013 15:24:19 -0500] rev 1240
run-tests: remove some unnecessary globals
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Fri, 24 May 2013 14:30:43 -0500] rev 1239
run-tests: add a log function
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Fri, 24 May 2013 14:30:43 -0500] rev 1238
run-tests: make vlog a proper function
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Fri, 24 May 2013 14:30:43 -0500] rev 1237
run-tests: unify marks and result codes
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Fri, 24 May 2013 14:30:35 -0500] rev 1236
run-tests: change return code of runone
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Fri, 24 May 2013 13:53:56 -0500] rev 1235
run-tests: regroup some initialization checks
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Fri, 24 May 2013 13:52:05 -0500] rev 1234
run-tests: fix a path existence check
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Fri, 24 May 2013 13:51:20 -0500] rev 1233
run-tests: regroup some variable initialization
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Fri, 24 May 2013 13:48:25 -0500] rev 1232
run-tests: regroup nested functions
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Fri, 24 May 2013 13:47:17 -0500] rev 1231
run-tests: regroup temp dir creation
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Fri, 24 May 2013 13:41:20 -0500] rev 1230
run-tests: pull hgrc creation out as function
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Fri, 24 May 2013 13:34:22 -0500] rev 1229
tests: simplify handling of unknown test types
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Fri, 24 May 2013 13:31:44 -0500] rev 1228
run-tests: filter out non-tests from default list
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Fri, 24 May 2013 13:23:19 -0500] rev 1227
run-tests: make a table of test types
[ original upstream message ]
Matt Mackall <mpm@selenic.com> [Fri, 24 May 2013 13:02:00 -0500] rev 1226
run-tests: don't need to test shebang any more
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Sun, 05 May 2013 01:25:36 +0100] rev 1225
Merge with stable
Siddharth Agarwal <sid0@fb.com> [Fri, 03 May 2013 15:18:21 -0700] rev 1224
run-tests: when running in parallel, delete tmpdirs immediately
This is especially important if extensions that use inotify are enabled,
because it's very easy to hit the inotify max_user_instances limit without
this.
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Sat, 20 Apr 2013 13:48:54 +0100] rev 1223
Merge with stable
Simon Heimberg <simohe@besonet.ch> [Wed, 10 Oct 2012 21:55:49 +0200] rev 1222
repo: repo isolation, do not pass on repo.ui for creating new repos
A repo should not get the configuration from an other repo, so create it with
the global configuration in repo.baseui.
This is done too when recreating a repo. The repo configuration is reread
anyway. And now deleted repo configuration does not persist.
[ orginal upstream message ]
Mads Kiilerich <madski@unity3d.com> [Wed, 17 Apr 2013 03:41:34 +0200] rev 1221
run-tests: introduce --random for running tests in random error
This is convenient when investigating failures one by one to avoid running the
same fixed tests first every time.
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Sat, 23 Mar 2013 14:43:30 +0000] rev 1220
Merge with stable
Simon Heimberg <simohe@besonet.ch> [Thu, 21 Mar 2013 08:56:21 +0100] rev 1219
run-tests: only sort files when not given as argument
os.listdir returns the files in any order. This has to be sorted.
But when given as argument, the user should be allowed to set any order.
This restores the behaviour before 9848a94e2a.
[ original upstream message ]
Durham Goode <durham@fb.com> [Tue, 12 Mar 2013 10:37:48 -0700] rev 1218
tests: fix test-profile to not depend on HGPROF environment variable
The test-profile test would fail if the user had HGPROF set to another
profiler in their environment. This fix makes the test independent of
that environment variable.
Reverts the previous attempt to fix this, which was not cross platoform.
[ original upstream message ]
Christian Ebert <blacktrash@gmx.net> [Thu, 14 Feb 2013 11:33:19 +0000] rev 1217
Merge with stable
Simon Heimberg <simohe@besonet.ch> [Mon, 15 Oct 2012 23:28:45 +0200] rev 1216
tests: inform on Windows about unnecessary glob lines
When glob lines directly match on windows, "/" (and not "\") was output in the
path on the line. No glob matching is necessary in this case.
The test output will look like this (when 5 tests have passed and no 4 has an
unnecessary glob):
...
Info, unnecessary glob: info about some/thing (glob)
..
[ original upstream message ]